Ram. Gupta, A. Behera, S. Farhad, and T. A. Nguyen, "Advanced Flexible Ceramics: Design, Properties, Manufacturing, and Emerging Applications", Advanced Ceramic Materials, pp.630, Elsevier 2023
EditedBook
B. K. Swain, S. K. Bhuyan, S. S. Mohapatra, D. K. Rajak, A. Behera, and C. I. Pruncu, "Adhesion strength investigation of plasma sprayed NiTi coating", Engineering Failure Analysis, vol.140, pp.106368, Elsevier, October 2022,
10.1016/j.engfailanal.2022.106368
Article
T., S. Potnuru, R., K., and A. Behera, "Dissimilar metal welding on Mg AZ31 and AA 6061 alloys by using friction stir welding", Int J Interact Des Manuf, pp.1-6, Springer, September 2022,
10.1007/s12008-022-01036-3
Article
R. Roshan, K. S. Arora, and A. Behera, "Effect of substrate temperature on the surface and interface properties of NiTi Atmospheric Plasma Sprayed coating", Surface Topography: Metrology and Properties, IOP, September 2022,
10.1088/2051-672X/ac9072
Article
A. Behera and R., "Intelligent Nanomaterials for Medicine", Nanomaterials and Nanotechnology in Medicine, ch.15, vol.1, no.1, pp.401-425, Wiley, https://onlinelibrary.wiley.com/doi/abs/10.1002/9781119558026.ch15, September 2022,
10.1002/9781119558026.ch15
Inbook
S. Chatterjee, A. Behera, and J. Xu, "Evaluation of Dimensional Inaccuracy in 3D Printed Products", Evaluation of Dimensional Inaccuracy in 3D Printed Products, ch.11, vol.1, pp.8, CRC, August 2022
Inbook
N. K. Kottana, H., S. Sengupta, K. Saxena, A. Behera, and S. Ghosh, "Investigation on synergetic effect of non-contact ultrasonic casting and mushy state rolling on microstructure and hardness of Al–Si–Al2O3 nanocomposites", Int. J. Interact. Des. Manuf., Springer, August 2022,
10.1007/s12008-022-00986-y
Article
Raj. Manik and A. Behera, "Manufacturing of 3D Print Biocompatible Shape Memory Alloys", Manufacturing of 3D Print Biocompatible Shape Memory Alloys, ch.15, vol.1, pp.18, Tayler & Francis, August 2022
Inbook
S. Chatterjee, J. Xu, T., K. Abhishek, S. Kumari, and A. Behera, "Performance of Smart Alloys in Manufacturing Processes during Subtractive and Additive Manufacturing", Performance of Smart Alloys in Manufacturing Processes during Subtractive and Additive Manufacturing, ch.14, vol.1, pp.14, Tayler & Francis, https://www.taylorfrancis.com/chapters/edit/10.1201/9781003189404-14/performance-smart-alloys-manufacturing-processes-subtractive-additive-manufacturing-suman-chatterjee-jinyang-xu-huynh-kumar-abhishek-soni-kumari-ajit-behera?context=ubx&refId=a9fb1086-6d39-419f-9125-c0f33b084cf0, August 2022
Inbook
L. Barik and A. Behera, "Smart 3D Nano-Printing in Automobile Industry", Smart 3D Nanoprinting, ch.3, vol.1, pp.341, CRC, August 2022
Inbook
L. Das, R. Nayak, K. Saxena, J. Nanda, S. P. Jena, A. Behera, S. Sehgal, C. Prakash, S. Dixit, and D. A. Zahra, "Determination of optimum machining parameters for face milling process of Ti6A14V metal matrix composite", Materials, vol.15, no.14, pp.4765, MDPI, July 2022,
10.3390/ma15144765
Article
M. Priyadarshini, H., C. K. Biswas, P. Singhal, D. Buddhi, and A. Behera, "Effect of grey relational optimization of process parameters on surface and tribological characteristics of annealed AISI P20 tool steel machined using wire EDM", International Journal on Interactive Design and Manufacturing, Springer, July 2022,
10.1007/s12008-022-00954-6
Article
A. Behera, "Freeform Optics/Nonimaging: An Introduction", Nanotechnology for Light Pollution Reduction, ch.2, vol.1, pp.15, CRC Press, https://www.taylorfrancis.com/chapters/edit/10.1201/9781003185109-2/freeform-optics-nonimaging-introduction-ajit-behera, July 2022
Inbook
A. Behera and M. K. Mahalik, "Smart Nanomaterials Usage for Artificial Skydomes", Nanotechnology for Light Pollution Reduction, ch.9, vol.1, pp.17, CRC Press, https://www.taylorfrancis.com/chapters/edit/10.1201/9781003185109-9/smart-nanomaterials-usage-artificial-skydomes-ajit-behera-mantu-kumar-mahalik, July 2022
Inbook
A. Behera and D. Nayak, "Smart Material Surface Science and application (SMASSA): A most awaited journey in smart technology", Applied Surface Science Advances, vol.9, pp.100242, Elsevier, June 2022,
10.1016/j.apsadv.2022.100242
Article
S. K. Patel and A. Behera, "Evolution of Phases and their Influence on Shape Memory Effect by Varying Sintering Parameters of NiTi Alloys", Metals and Materials International, pp.1-15, Springer, May 2022,
10.1007/s12540-021-01166-5
Article
A. Behera, S., and A. Pattanaik, "Role of Additives on Metal Coating Substrate Surface", Chemical Modification of Solid Surfaces by the Use of Additives, ch.8, vol.1, pp.176-191, Bentham Science, https://benthambooks.com/book/9789815036817/chapter/198109/, May 2022,
10.2174/97898150368171210101
Inbook
B. Yelamasetti, P. N. Kumar, V. R. G, U. K. Saxena, V. Msomi, V. H. M, and A. Behera, "Surface modification of aluminum alloy 6061 by embedding B4C particles via friction stir processing", Materials Research Express, vol.9, no.5, pp.1-12, IOP, May 2022,
10.1088/2053-1591/ac6da7
Article
B. K. Swain, S. Chatterjee, S. S. Mohapatra, and A. Behera, "Mechanical Properties Evaluation and Parametric Optimization of Atmospheric Plasma Spray NiTi Coating", Journal of Materials Engineering and Performance, vol.1, pp.1-15, Springer, April 2022,
https://doi.org/10.1007/s11665-022-06834-0
Article
R. Mohapatra, S. Kuppili, T. K. Suvvari, V. Kandi, A. Behera, S. Verma, K. E. Zahan, S. Biswal, T. Al, M. El, A. Sarangi, and K. Dhama, "SARS-CoV-2 and its variants of concern including Omicron: A never ending pandemic", Chemical Biology & Drug Design, vol.99, no.5, pp.769-788, Wiley, February 2022,
10.1111/cbdd.14035
Article
A. Sinha, B. K. Swain, A. Behera, P. Mallick, S. K. Samal, H., and A. Behera, "A Review on the Processing of Aero-Turbine Blade Using 3D Print Techniques", Journal of Manufacturing and Materials Processing, vol.6, no.1, pp.1-34, MDPI, January 2022,
10.3390/jmmp6010016
Article
A. Behera, D. K. Rajak, and . K. Jeyasubramanian, "Chapter 19 - Fabrication of nanostructures with excellent self-cleaning properties", Design, Fabrication, and Characterization of Multifunctional Nanomaterials, ch.19, vol.1, pp.449-478, Elsevier, January 2022,
10.1016/B978-0-12-820558-7.00014-5
Inbook
A. Behera, D. Sahini, and D. Pardhi, "Chapter 9 - Procedures for recycling of nanomaterials: a sustainable approach", Nanomaterials Recycling, ch.9, vol.1, pp.175-207, Elsevier, January 2022,
10.1016/B978-0-323-90982-2.00009-3
Inbook
A. Behera, "Fuel cells recycling", Nanotechnology in Fuel Cells, ch.14, vol.1, pp.361-373, Elsevier, https://www.sciencedirect.com/science/article/pii/B9780323857277000114?via%3Dihub, January 2022,
10.1016/B978-0-323-85727-7.00011-4
Inbook
S. Chatterjee, S. S. Mahapatra, and A. Behera, "NiTi joining with other metallic materials", Nickel-Titanium Smart Hybrid Materials, ch.18, vol.1, pp.379-398, Elsevier, January 2022,
10.1016/B978-0-323-91173-3.00002-X
Inbook
Raj. Manik and A. Behera, "NiTi smart alloys in electronic and electrical equipment", Nickel-Titanium Smart Hybrid Materials, ch.17, vol.1, pp.355-377, Elsevier, January 2022,
10.1016/B978-0-323-91173-3.00009-2
Inbook
S. Sampath, A. Behera, S. Thomas, and T. A. Nguyen, "NiTi-based smart micro- and nanoalloys: an introduction", Nickel-Titanium Smart Hybrid Materials, ch.1, vol.1, pp.3-8, Elsevier, January 2022,
10.1016/B978-0-323-91173-3.00018-3
Inbook
A. Behera, "Shape-controlled metal nanoparticles for fuel cells applications", Nanotechnology in Fuel Cells, ch.13, vol.1, pp.349-360, Elsevier, https://www.sciencedirect.com/science/article/pii/B978032385727700014X?via%3Dihub, January 2022,
10.1016/B978-0-323-85727-7.00014-X
Inbook
A. Behera, "Smart applications of NiTi shape memory alloy in biomedical industries", Nickel-Titanium Smart Hybrid Materials, ch.16, vol.1, pp.327-354, Elsevier, January 2022,
10.1016/B978-0-323-91173-3.00007-9
Inbook
P. Sahoo, B. K. Swain, and A. Behera, "Thermal spraying of NiTi alloy", Nickel-Titanium Smart Hybrid Materials, ch.13, vol.1, pp.247-269, Elsevier, January 2022,
10.1016/B978-0-323-91173-3.00001-8
Inbook
A. Behera and A. Behera, "Ti-based nanoalloy in automobile industry", Nanotechnology in the Automotive Industry, ch.13, vol.1, pp.255-268, Elsevier, https://www.sciencedirect.com/science/article/pii/B978032390524400013X?via%3Dihub, January 2022,
10.1016/B978-0-323-90524-4.00013-X
Inbook
A. Behera and R. Mohapatra, "15 - Green technology for environmental hazard remediation", Nanostructured Materials for Visible Light Photocatalysis, ch.15, vol.1, pp.413-431, Elsevier 2022,
10.1016/B978-0-12-823018-3.00022-1
Inbook
S. K. Samal, H., K. Saxena, A. Behera, T. A. Nguyen, A. Behera, C. Prakash, S. Dixit, and K. Mohammed, "3D-Printed Satellite Brackets: Materials, Manufacturing and Applications", Crystals, vol.12, no.8, pp.1-22, MDPI 2022,
https://doi.org/10.3390/cryst12081148
Article
D. K. Rajak, P. Wagh, A. Kumar, A. Behera, and C. Pruncu, "Advanced Polymers in Aircraft Structures", Materials, Structures and Manufacturing for Aircraft, ch.3, vol.1, pp.65–88, Springer 2022,
10.1007/978-3-030-91873-6_3
Inbook
S. Srivastava, A. Behera, and R. Biswal, "Assessing the Grip of Solar Energy Systems on Environmental Sustainability- A Review", Micro and Nanosystems, vol.14, no.2, pp.133 - 143, Bentham Science 2022,
10.2174/1876402913666210908122052
Article
A. Behera and S. Chatterjee, "Chapter 16 - Industrial scale up applications of nanomaterials recycling", Nanomaterials Recycling: A volume in Micro and Nano Technologies, ch.16, vol.1, pp.341-361, Elsevier 2022,
10.1016/B978-0-323-90982-2.00015-9
Inbook
P. Sahoo and A. Behera, "Chapter 9 - Plasma technology in antimicrobial nanocoatings", Plasma at the Nanoscale, ch.9, vol.1, pp.207-219, Elsevier, https://www.sciencedirect.com/science/article/pii/B9780323899307000029#! 2022,
10.1016/B978-0-323-89930-7.00002-9
Inbook
R. Mohapatra, V. Kandi, S. Mishra, A. Sarangi, M. K. Pradhan, P. Mohapatra, A. Behera, and K. Dhama, "Emerging novel sub-lineage BA.2.75: The next dominant omicron variant?", International Journal of Surgery, vol.104, pp.106835, Elsevier 2022,
https://doi.org/10.1016/j.ijsu.2022.106835
Article
A. Behera, "Freeform Optics/Nonimaging: An Introduction", Nanotechnology for Light Pollution Reduction, ch.2, vol.1, pp.15, CRC, https://www.taylorfrancis.com/chapters/edit/10.1201/9781003185109-2/freeform-optics-nonimaging-introduction-ajit-behera 2022
Inbook
N. E. Dan, P. B. Hussain, N. B. Shaik, B. Bakthavatchalam, R. K. Mohapatra, and A. Behera, "Improved Surface Morphology and Corrosion Resistance Performance of 2205 Duplex Stainless Steel by Low Temperature Gas Nitriding", Journal of Bio- and Tribo-Corrosion, vol.100, no.8, pp.3-11, Springer 2022,
https://doi.org/10.1007/s40735-022-00698-6
Article
B. K. Swain, S. Mantry, S. S. Mohapatra, S. C. Mishra, and A. Behera, "Investigation of Tribological Behavior of Plasma Sprayed NiTi Coating for Aerospace Application", Journal of Thermal Spray Technology, Springer 2022,
https://doi.org/10.1007/s11666-022-01452-7
Article
S. Thomas, A. Behera, and T. A. Nguyen, "Nickel-Titanium Smart Hybrid Materials: From Micro- to Nano-structured Alloys for Emerging Applications", Micro and Nano Technologies, ch.19 s, pp.460, Elsevier 2022
EditedBook
B. K. Swain, S. S. Mohapatra, and A. Behera, "Plasma Spray Coating", Thermal Spray Coatings, ch.13, vol.1, pp.14, Elsevier 2022
Inbook
R. Kumari, J. D. Majumdar, and A. Behera, "Recent Advances in Manufacturing Processes", Lecture Notes in Mechanical Engineering, vol.1, no.1, Springer 2022,
10.1007/978-981-16-3686-8
EditedBook
A. Behera, T. A. Nguyen, and R. Gupta, "Smart 3D Nanoprinting: Fundamentals, Materials, and Applications", NA, CRC 2022
EditedBook
A. Behera and M. K. Mahalik, "Smart Nanomaterials Usage for Artificial Skydomes", Nanotechnology for Light Pollution Reduction, ch.9, vol.1, pp.17, CRC, https://www.taylorfrancis.com/chapters/edit/10.1201/9781003185109-9/smart-nanomaterials-usage-artificial-skydomes-ajit-behera-mantu-kumar-mahalik 2022
Inbook
A. Behera, S. K. Das, and R. Biswal, "Wireless Nanosensors Network for Light Pollution Control", Nanotechnology for Light Pollution Reduction, ch.11, vol.1, pp.16, CRC Press, https://www.taylorfrancis.com/chapters/edit/10.1201/9781003185109-11/wireless-nanosensors-network-light-pollution-control-ajit-behera-santos-kumar-das-ramakrishna-biswal?context=ubx&refId=fd7b2769-2c4e-48ea-a923-7381c742f744 2022
Inbook
A. Behera, S. K. Das, and R. Biswal, "Wireless Nanosensors Network for Light Pollution Control", Nanotechnology for Light Pollution Reduction, ch.11, vol.1, pp.16, CRC, https://www.taylorfrancis.com/chapters/edit/10.1201/9781003185109-11/wireless-nanosensors-network-light-pollution-control-ajit-behera-santos-kumar-das-ramakrishna-biswal 2022
Inbook
A. Behera, S. Aich, and T. Theivasanthi, "Chapter 8 - Magnetron sputtering for development of nanostructured materials", Design, Fabrication, and Characterization of Multifunctional Nanomaterials, ch.8, vol.1, pp.177-199, Elsevier, https://www.sciencedirect.com/science/article/pii/B9780128205587000029?via%3Dihub#!, December 2021
Inbook
D. K. Rajak, D., A. Behera, and P. Menezes, "Role of Composite Materials in Automotive Sector: Potential Applications", Advances in Engine Tribology, ch.10, vol.1, pp.193–217, Springer, https://link.springer.com/chapter/10.1007/978-981-16-8337-4_10#citeas, December 2021,
10.1007/978-981-16-8337-4_10
Inbook
M. Priyadarshini, A. Behera, C. K. Biswas, and D. K. Rajak, "Experimental Analysis and Mechanical Characterization of AISI P20 Tool Steel Through Heat-Treatment Process", Journal of Bio- and Tribo-Corrosion, vol.8, no.3, pp.1-10, Springer, November 2021,
10.1007/s40735-021-00607-3
Article
B., A. Behera, and S. Aich, "A Critical Review on Nickel–Titanium Thin-Film Shape Memory Alloy Fabricated by Magnetron Sputtering and Influence of Process Parameters", Transactions of the Indian Institute of Metals, vol.74, pp.2521–2540, Springer, October 2021,
10.1007/s12666-021-02418-z
Article
J. Parida, S. C. Mishra, and A. Behera, "Heat Treatment Effect on the Corrosion Behaviour of Plasma Processed LM6 Alloy", Processing and Characterization of Materials, ch.3, vol.1, no.1, pp.25-36, Springer, September 2021,
10.1007/978-981-16-3937-1_3
Inbook
L. Barik, S. K. Samal, A. Behera, D. K. Rajak, and C. Pruncu, "Replacement of steel by NITINOL as coupling agent in automobile shaft", ISSS Journal of Micro and Smart Systems, Springer, July 2021,
10.1007/s41683-021-00075-4
Article
B. Swain and A. Behera, "Effect of powder feed rate on adhesion strength and microhardness of APS NiTi coating: a microstructural investigation", Surface Topography: Metrology and Properties, vol.9, no.2, pp.025039, IOP, June 2021,
10.1088/2051-672X/ac0a38
Article
J. Angelinthangakani, C. D. Sheela, R. Dorothy, N. Renugadevi, J. Jeyasundari, S. Rajendran, and A. Behera, "Applications of copper alloy nanoparticles in automotive industry", Nanotechnology in the Automotive Industry, ch.14, vol.1, pp.269-285, Elsevier, https://www.sciencedirect.com/science/article/pii/B9780323905244000141?via%3Dihub#!, May 2021,
10.1016/B978-0-323-90524-4.00014-1
Inbook
S. D. Kumar, S. Dewangan, S., S., and A. Behera, "3D and 4D Printing in Industry 4.0: Trends, Challenges, and Opportunities", Next Generation Materials and Processing Technologies, ch.20, vol.1, no.1, pp.1-20, Springer, na 2021,
10.1007/978-981-16-0182-8_43
Inbook
A. Behera, D. K. Rajak, and P. B. Hussain, "3D printing and nanosensors", Nanosensors for Smart Manufacturing, ch.8, vol.1, no.1, pp.183-198, Elsevier, micro and nano technologies 2021,
10.1016/B978-0-12-823358-0.00010-1
Inbook
S. K. Sahu, D. K. Mishra, A. Behera, and R. P. Dalai, "An overview on the effect of heat-treatment and cooling rates on Ni-based superalloys", in Advances in Mechanical Engineering and Nanotechnology, vol.1, pp.3309-3312, Elsevier, https://www.sciencedirect.com/science/article/pii/S2214785321050057 2021,
10.1016/j.matpr.2021.07.146
Inproceedings
B. Swain·, P. Mallick, S. S. Mohapatra, A. Behera, D. K. Rajak, and P. Menezes, "Atmospheric Plasma Spray Coating of NiTi on Mild Steel Substrate: An Microstructural Investigation", Journal of Bio- and Tribo-Corrosion, vol.104, no.7, pp.2-5, Springer 2021,
10.1007/s40735-021-00541-4
Article
N. B. Shaik, K. M. Mantrala, B. Bakthavatchalam, Q. F. Gillani, M. F. Rehman, A. Behera, D. K. Rajak, and C. Pruncu, "Corrosion Behavior of LENS Deposited CoCrMo Alloy Using Bayesian Regularization-Based Artifcial Neural Network (BRANN)", Journal of Bio- and Tribo-Corrosion, vol.116, no.7, pp.2-13, Springer 2021,
10.1007/s40735-021-00550-3
Article
B. K. Swain, A. R. Pati, P. Mallick, S. S. Mohapatra, and A. Behera, "Development of Highly Durable Superhydrophobic Coatings by One-Step Plasma Spray Methodology", Journal of Thermal Spray Technology, vol.30, pp.405–423, Springer 2021,
https://doi.org/10.1007/s11666-020-01132-4
Article
D. K. Rajak, A. Kumar, A. Behera, and P. Menezes, "Diamond-Like Carbon (DLC) Coatings: Classification, Properties, and Applications", Applied Sciences, vol.11, no.10, pp.1-20, MDPI 2021,
10.3390/app11104445
Article
B. K. Swain, A. R. Pati, S. S. Mohapatra, and A. Behera, "Enhancement of Flow Boiling at Very High Initial Surface Temperature by Using Various Additives", Journal of Thermal Science and Engineering Applications, vol.21, pp.041020-1-9, ASME 2021,
https://doi.org/10.1115/1.4048837
Article
R. K. Mohapatra, P. K. Das, D. Kabiraz, D. Das, A. Behera, and M. E. Zahan, "Generation, Transportation and Utilization of Indian Coal Ash", Clean Coal Technologies, ch.11, vol.1, no.1, pp.267-288, Springer, na 2021,
10.1007/978-3-030-68502-7_11
Inbook
P. Mohan, D., P., A. Behera, V. Amigó, and A. B. Elshalakany, "Influence of ß-phase stability in elemental blended Ti-Mo and Ti-Mo-Zr alloys", Micron, vol.142, pp.102992, Elsevier 2021,
https://doi.org/10.1016/j.micron.2020.102992
Article
B. Swain, A. R. Pati, S. S. Mohapatra, and A. Behera, "Interchanging characteristic of plasma spray coating from superhydrophobic to hydrophilic under the applied electric field", Surface Engineering, Tayler & Francis 2021,
10.1080/02670844.2021.1959286
Article
A. Behera, Ram. S. Maurya, A. K. Nayak, and S. Nath, "Invited Editorial Note (Int. J. Materials and Product Technology, Vol. 62, Nos. 1/2/3, 2021 )", Int. J. Materials and Product Technology, vol.62, no.1/2/3, pp.1-3 2021
Misc
B. K. Swain, P. Mallick, R. Gupta, G. Yasin, S. S. Mohapatra, N., and A. Behera, "Mechanical and Tribological Properties Evaluation of Plasma-Sprayed Shape Memory Alloy Coating", Journal of Alloys and Compounds, vol.863, pp.158599, Elsevier 2021,
https://doi.org/10.1016/j.jallcom.2021.158599
Article
A. Behera, P. Mallick, and S. S. Mohapatra, "Nanocoatings for anti-corrosion: Materials, Fabrications and Applications", Fiber-Reinforced Nanocomposites: Fundamentals and Applications, ch.13, pp.227-243, Elsevier 2021,
https://doi.org/10.1016/B978-0-12-819359-4.00013-1
Inbook
B. K. Swain, M. Priyadarshini, S. S. Mohapatra, R. Gupta, and A. Behera, "Parametric optimization of atmospheric plasma spray coating using fuzzy TOPSIS hybrid technique", Journal of Alloys and Compounds, vol.867, pp.159074, Elsevier 2021,
https://doi.org/10.1016/j.jallcom.2021.159074
Article
A. Behera, J. Pan, and A. Behera, "Temperature nanosensors for smart manufacturing", Nanosensors for Smart Manufacturing, ch.11, vol.1, no.1, pp.249-272, Elsevier, micro and nano technologies 2021,
10.1016/B978-0-12-823358-0.00013-7
Inbook
R. Kumari, A. Behera, P. Bharti, and D. K. Sethi, "TRIBOLOGICAL PERFORMANCE OF HEAT TREATED 0.6% C STEEL", vol.1, no.1, pp.1-10 2021
Proceedings
A. Behera, D. K. Rajak, R. Kolahchi, M. L. Scutaru, and C. Pruncu, "Current global scenario of Sputter deposited NiTi smart systems", Journal of Materials Research and Technology, vol.9, no.6, pp.14582-14598, Elsevier, December 2020,
10.1016/j.jmrt.2020.10.032
Article
D. Pardhi, D. S. Karaman, J. Timonen, Wei. Wu, Qi. Zhang, S. Satija, M. Mehta, N. Charbe, P. Mccarron, M. Tambuwala, H. Bakshi, P. Negi, A. Aljabali, K. Dua, D. Chellappan, A. Behera, K. Pathak, R. Watharkar, J. Rautio, and J. Rosenholm, "Anti-bacterial activity of inorganic nanomaterials and their antimicrobial peptide conjugates against resistant and non-resistant pathogens", International Journal of Pharmaceutics, vol.586, no.119531, pp.1, Elsevier, August 2020,
10.1016/j.ijpharm.2020.119531
Article
K. Barik, S. Chitransh, A. R. Pati, B. Swain, A. Behera, and S. S. Mohapatra, "The enhancement of laminar jet cooling effectiveness at very high surface temperature by using Al2O3 nanofluid as a coolant", Heat Transfer, vol.49, no.3, pp.1554-1567, Wiley, May 2020,
10.1002/htj.21676
Article
S. K. Patel, B. Swain, R. Roshan, N. K. Sahu, and A. Behera, "A brief review of shape memory effects and fabrication processes of NiTi shape memory alloys", in Materials Today: Proceeding 2nd International Conference on Processing and Characterization of Materials, Elsevier 2020,
10.1016/j.matpr.2020.03.539
Inproceedings
S. K. Patel, B. Behera, B. Swain, R. Roshan, D. Sahoo, and A. Behera, "A review on NiTi alloys for biomedical applications and their biocompatibility", in Materials Today: Proceeding 2nd International Conference on Processing and Characterization of Materials, Elsevier 2020,
10.1016/j.matpr.2020.03.538
Inproceedings
S. K. Patel, B. K. Swain, and A. Behera, "Advanced Processing of Superalloys for Aerospace Industries", Functional and Smart Materials, ch.6, pp.14, CRC Press 2020
Inbook
A. Behera and P. Mallick, "Application of nanofibers in aerospace industry", Fiber-Reinforced Nanocomposites: Fundamentals and Applications, ch.20, pp.449-457, Elsevier, a volume in micro and nano technologies 2020,
10.1016/B978-0-12-819904-6.00020-7
Inbook
M. and A. Behera, "Bricks fabricated for high temperature furnace lining", vol.1, Lambert Publishing 2020
Book
M. Sharma and A. Behera, "Cryotreatment of Nickel-Titanium shape memory alloy", vol.1, Lambert Publishing 2020
Book
A. Behera, B. Behera, D., A. Pattnaik, K., P. Mallick, S. Bhuyan, S. C. Mishra, and A. Behera, "Effect of Cold Work on Microstructure and Corrosion Properties of 304L Stainless Steel", Advances in Mechanical Processing and Design, ch.10, vol.1, no.1, pp.433-439, Springer, na 2020,
10.1007/978-981-15-7779-6_37
Inbook
J. Parida, S., S. C. Mishra, and A. Behera, "Effect of heat treatment on wear behaviour of Al-7?wt%Si-X wt% Mg alloys", in 2nd International Conference on Processing and Characterization of Materials, Elsevier 2020,
10.1016/j.matpr.2020.02.828
Inproceedings
M. Priyadarshini, A. Behera, and C. K. Biswas, "Effect of sub-zero temperatures on wear resistance of AISI P20 tool steel", Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol.42, pp.212, Springer 2020,
https://doi.org/10.1007/s40430-020-02298-2
Article
S. Das, V. Karthik, S. K. Pabi, A. Behera, S. K. Patel, B. Swain, R. Roshan, and A. Behera, "Enhancement of thermal conductivity of Cu-Cr dispersed nanofluids according to multiscale modeling", in Materials Today: Proceeding 2nd International Conference on Processing and Characterization of Materials, Elsevier 2020,
10.1016/j.matpr.2020.03.330
Inproceedings
B. K. Swain, P. Mallick, S. Patel, R. Roshan, . S. Mahapatra, S. Bhuyan, and A. Behera, "Failure analysis and materials development of gas turbine blade", in 2nd International Conference on Processing and Characterization of Materials, Elsevier 2020,
10.1016/j.matpr.2020.02.859
Inproceedings
A. Behera, B. Swain, and D. K. Sahoo, "Fiber-reinforced ceramic matrix nanocomposites", Fiber-Reinforced Nanocomposites: Fundamentals and Applications, ch.16, pp.359-368, Elsevier 2020,
10.1016/B978-0-12-819904-6.00016-5
Inbook
A. Behera, S. Patel, and M. Priyadarshini, "Fiber-reinforced metal matrix nanocomposites", Fiber-Reinforced Nanocomposites: Fundamentals and Applications, ch.7, pp.147-156, Elsevier, micro and nano technologies 2020,
10.1016/B978-0-12-819904-6.00007-4
Inbook
A. Kumar, A. K. Behura, D. K. Rajak, A. Behera, P. Kumar, and R. Kumar, "Fundamental Concepts of Bamboo: Classifications, Properties and Applications", Bamboo Fiber Composites, ch.4, pp.39-62, Springer 2020,
https://doi.org/10.1007/978-981-15-8489-3_3
Inbook
M. Priyadarshini, C. K. Biswas, and A. Behera, "Grey-Taguchi optimization of Wire-EDM parameters for P20 tool steel", in ICMRE'19: Proceedings of the 5th International Conference on Mechatronics and Robotics Engineering, vol.598, pp.5–8, ACM digital Library 2020,
https://doi.org/10.1145/3314493.3314506
Inproceedings
E. Gopinath, A. S. Kanishka, K. S. Tharun, S. P, and A. Behera, "Homogenized mixture (Ni-Al-hBN) plasma sprayed on mild steel by varying spray velocity", in 2nd International Conference on Processing and Characterization of Materials, Elsevier 2020,
10.1016/j.matpr.2020.03.708
Inproceedings
S., A. Behera, D. K. Rajak, P. Menezes, and C. Pruncu, "Manufacturing and Mechanical Characterization of Fly-Ash-Reinforced Materials for Furnace Lining Applications", Journal of Materials Engineering and Performance, vol.29, pp.6307–6321, Springer 2020,
https://doi.org/10.1007/s11665-020-05121-0
Article
B. K. Swain, P. Mallick, S. K. Bhuyan, S. S. Mohapatra, S. C. Mishra, and A. Behera, "Mechanical Properties of NiTi Plasma Spray Coating", Journal of Thermal Spray Technology, vol.29, pp.741–755, Springer 2020,
https://doi.org/10.1007/s11666-020-01017-6
Article
S. Chatterjee, A. K. Pandey, S. S. Mahapatra, K. S. Arora, and A. Behera, "Microstructural variation at interface during Fiber laser joining of NiTi/Ti6Al4V and effect of mechanical strength", Journal of Materials Processing Technology, vol.282, pp.116661, Elsevier publisher 2020,
https://doi.org/10.1016/j.jmatprotec.2020.116661
Article
M. Priyadarshini, A. Behera, B. Swain, and S. K. Patel, "Multi-objective optimization of EDM process for titanium alloy", in Materials Today: Proceeding 2nd International Conference on Processing and Characterization of Materials, Elsevier 2020,
10.1016/j.matpr.2020.03.492
Inproceedings
M. Priyadarshini, A. Behera, C. K. Biswas, B. Swain, and S. K. Patel, "Multi-objective optimization of WEDM process by hybrid methodology", in Materials Today: Proceeding 2nd International Conference on Processing and Characterization of Materials, Elsevier 2020,
10.1016/j.matpr.2020.03.321
Inproceedings
D. P. Sahoo, M., D. K. Sahoo, S. Sarkar, and A. Behera, "Nanoscale analysis on spark plasma sintered fly-ash bricks and their comparative study with SiN-Zr refractory bricks", Micro and Nanosystems, vol.12, no.2, pp.122 - 128, Bentham Science 2020,
10.2174/1876402912666200313124418
Article
D. K. Sahoo, S., S. Sarkar, and A. Behera, "Nanoscale Analysis on Spark Plasma Sintered Fly-Ash Bricks and their Comparative Study with SiN-Zr Refractory Bricks", Micro and Nanosystem, vol.12, no.2, pp.122-128, Bentham Science 2020,
10.2174/1876402912666200313124418
Article
A. Behera, P. Parida, and A. Kumar, "NiTi thin film shape memory alloy and their industrial application", Advanced Manufacturing and Processing Technology, ch.9, pp.22, CRC Press 2020,
https://doi.org/10.1201/9780429298042
Inbook
D. K. Sahini, J. Ghose, S. K. Jha, A. Behera, and A. Mandal, "Optimization and Simulation of Additive Manufacturing Processes: Challenges and Opportunities", Additive Manufacturing Applications for Metals and Composites, ch.10, pp.23, IGI Global 2020,
10.4018/978-1-7998-4054-1.ch010
Inbook
D. K. Sahini, J. Ghose, S. K. Jha, A. Behera, and A. Mandal, "Optimization and Simulation of Additive Manufacturing Processes: Challenges and Opportunities – A Review", Additive Manufacturing Applications for Metals and Composites, ch.10, pp.23, IGI Publisher 2020,
10.4018/978-1-7998-4054-1.ch010
Inbook
S. Chatterjee, S. S. Mahapatra, K. S. Arora, and A. Behera, "Physical and Mechanical Characterization of Dissimilar Laser Welded Joints of AISI 316/Cu/SMA using Fiber Laser Technology", Journal of Laser Applications, vol.32, pp.032018.1-18, AIP Publishing 2020,
https://doi.org/10.2351/7.0000003
Article
S. Chatterjee, S. S. Mahapatra, K. S. Arora, and A. Behera, "Physical and Mechanical Characterization of Dissimilar Laser Welded Joints of AISI 316/Cu/SMA using Fiber Laser Technology", Journal of Laser Applications, vol.32, pp.032018, Laser Institute of America 2020,
https://doi.org/10.2351/7.0000003
Article
P. Mallick, B. Behera, S. K. Patel, B. Swain, R. Roshan, and A. Behera, "Plasma spray parameters to optimize the properties of abrasion coating used in axial flow compressors of aero-engines to maintain blade tip clearance", in 2nd International Conference on Processing and Characterization of Materials, Elsevier 2020,
10.1016/j.matpr.2020.03.835
Inproceedings
A. Behera, "Processes and Application in Additive manufacturing: Practices in aerospace, automobile, medical and electronic industries", Additive Manufacturing Applications for Metals and Composites, ch.2, pp.23, IGI Global 2020,
10.4018/978-1-7998-4054-1.ch002
Inbook
A. Behera, "Processes and Application in Additive Manufacturing: Practices in Aerospace, Automobile, Medical, and Electronic Industries", Additive Manufacturing Applications for Metals and Composites, ch.2, pp.25-47, IGI Publisher 2020,
10.4018/978-1-7998-4054-1.ch002
Inbook
B. Behera, P. Mallick, S. K. Patel, A. Behera, D. Sahoo, and A. Behera, "Splat analysis of plasma sprayed (Al?+?Ni?+?h(BN)) homogenized mixture for improvement of abradable resistance on aero-engine inner casing surface", in Materials Today: Proceeding 2nd International Conference on Processing and Characterization of Materials, Elsevier 2020,
10.1016/j.matpr.2020.03.836
Inproceedings
B. K. Behera, P. Mallick, B. K. Swain, S. K. Patel, R. Roshan, and A. Behera, "Surface modified mild steel and copper using homogenized fly-ash?+?quartz?+?ilmenite by plasma technology", Materials Today: Proceedings, vol.33, pp.5703-5708, Elsevier 2020,
https://doi.org/10.1016/j.matpr.2020.04.526
Article
K. Barik, B. K. Swain, A. Behera, S. Chitransh, and S. S. Mohapatra, "The Experimental and Numerical Investigation on the Enhancement of Stagnation and Parallel Zones of Laminar Jet", Thermal Science and Engineering Progress, vol.19, pp.1-13, Elsevier 2020,
https://doi.org/10.1016/j.tsep.2020.100649
Article
Raj. Manik and A. Behera, "Thermal encoding using shape memory alloy", in 2nd International Conference on Processing and Characterization of Materials, Elsevier 2020,
10.1016/j.matpr.2020.04.529
Inproceedings
B. K. Swain, S. K. Bhuyan, R. Behera, S. S. Mohapatra, and A. Behera, "Wear: A Serious Problem in Industry", Tribology in Materials and Manufacturing, ch.4, pp.25, InTech Press 2020,
10.5772/intechopen.94211
Inbook
M. Priyadarshini, C. K. Biswas, and A. Behera, "Machining of sub-cooled low carbon tool steel by wire-EDM", Materials and Manufacturing Processes, vol.34, no.12, pp.1316-1325, Taylor & Francis, September 2019,
10.1080/10426914.2019.1662035
Article
A. Behera, S. S. Mohapatra, and D. K. Verma, "Nanomaterial: fundamental principle and application", Nanotechnology and Nanomaterial applications in food, health and biomedical science, ch.4, part -1, pp.., Apple Academic Press & CRC press, September 2019
Inbook
. Lily, B. Swain, B. Munshi, S. S. Mohapatra, and A. Behera, "The SDS and steel surface interaction behaviour in case of high mass flux spray cooling from very high temperature", Corrosion Science, vol.157, pp.508-517, Elsevier, August 2019,
10.1016/j.corsci.2019.06.007
Article
. Lily, A. R. Pati, A. Panda, B. Munshi, S. S. Mohapatra, A. Behera, and B. Saha, "High mass flux spray quenching on an inclined surface: A novel methodology for the attainment of enhanced uniform cooling with unaltered surface morphology in transition boiling regime", International Journal of Heat and Mass Transfer, vol.131, pp.11-30, Elsevier, March 2019,
10.1016/j.ijheatmasstransfer.2018.10.116
Article
. Lily, A. R. Pati, A. Panda, B. Munshi, S. S. Mohapatra, A. Behera, and B. Saha, "High mass flux spray quenching on an inclined surface: A novel methodology for the attainment of enhanced uniform cooling with unaltered surface morphology in transition boiling regime", International Journal of Heat and Mass Transfer, vol.131, pp.11-30, Elsevier, March 2019,
10.1016/j.ijheatmasstransfer.2018.10.116
Article
B. K. Swain, S. Bajpai, and A. Behera, "Microstructural evolution of NITINOL and their species formed by atmospheric plasma spraying", Surface Topography: Metrology and Properties, vol.7, no.1, pp.1-10, IOP, January 2019,
10.1088/2051-672X/aaf30e
Article
M. Priyadarshini, C. K. Biswas, and A. Behera, "Effect of sub-zero temperatures on wear resistance of AISI P20 tool steel", Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol.journal of the brazilian society of mechanical sci, no.42, pp.1-13, Springer 2019,
https://doi.org/10.1007/s40430-020-02298-2
Article
S. K. Patel, B. K. Swain, A. Behera, and S. S. Mohapatra, "Metallic Glasses: A Revolution in Material Science, Book title: Metallic Glasses", Metallic Glasses, ch.1, pp.1, InTech 2019,
10.5772/intechopen.90165
Inbook
A. R. Pati, N., L. Das, S. Teja, S. Nayak, A. Kumar, A. Sahoo, B. Munshi, A. Behera, H. Sutar, and S. S. Mohapatra, "The discrepancy in the prediction of surface temperatures by inverse heat conduction models for different quenching processes from very high initial surface temperature", Inverse Problems in Science and Engineering, vol.27, no.6, pp.808-835, Taylor & Francis 2019,
10.1080/17415977.2018.1501369.
Article
M. Satapathy, P. Varshney, S. S. Mohapatra, A. Behera, and A. Kumar, "Fabrication of durable porous and non-porous superhydrophobic polymer composite coatings with excellent self-cleaning property", Surface and Coatings Technology, vol.341, pp.31-39, Elsevier, May 2018,
10.1016/j.surfcoat.2017.07.025
Article
A. Behera and S. S. Mohapatra, "Challenges in recovery of valuable and hazardous elements from bulk fly ash and options for increasing fly ash utilization", Coal fly ash beneficiation: treatment of acid mine drainage with coal fly ash, ch.7, pp.119-139, IntechOpen, London, United Kingdom 2018,
10.5772/intechopen.69469
Inbook
B. K. Swain, A. Pattanaik, S. K. Bhuyan, K. Barik, S. Sethi, S. K. Samal, S. C. Mishra, and A. Behera, "Solid particle erosion wear on plasma sprayed mild steel and copper surface", Materials Today: Proceedings, vol.5, pp.20403-20412, Elsevier 2018
Article
M. Priyadarshini, C. K. Biswas, and A. Behera, "Wire Electro Discharge Machining of P20 Tool Steel", in Materials Today: Proceeding, vol.5, pp.25519-25523, Elsevier publisher 2018,
https://doi.org/10.1016/j.matpr.2018.10.358
Inproceedings
A. Behera, . S. Aich, and .. S. Ghosh, "Simulation of magnetron sputtered Ni/Ti thin film and the effect of annealing", Emerging Materials Research, vol.6, no.2, pp.254-259, Institute of Civil Engineering, November 2017,
10.1680/jemmr.16.00093
Article
. M. Satapathy, P. Varshney, .. D. Nanda, S. S. Mohapatra, A. Behera, and A. Kumar, "Fabrication of durable porous and non-porous superhydrophobic LLDPE/SiO2 nanoparticles coatings with excellent self-cleaning property", Surface and Coatings Technology, vol.341, pp.31-39, Elsiver, May 2017,
10.1016/j.surfcoat.2017.07.025
Article
N. Bhatt, A. R. Pati, A. Kumar, A. Behera, B. Munshi, and S. S. Mohapatra, "High mass flux spray cooling with additives of low specific heat and surface tension: A novel process to enhance the heat removal rate", Applied Thermal Engineering, vol.120, pp.537-548, Elsevier, April 2017,
10.1016/j.applthermaleng.2017.03.137
Article
A. Pattanaik, S. K. Bhuyan, S. C. Mishra, and A. Behera, "Dry sliding wear behaviour of micro oven treated fly ash reinforced epoxy composite using extended taguchi approach optimization", Materials Science and Engineering, vol.178, IOP Science 2017,
10.1088/1757-899X/178/1/012004
Article
B. Swain and A. Behera, "Plasma processing of iron ore fines: iron ore fines having high silica content", LAP Lambert Academic Publishing ( 2017
Book
N. H. Bhatt, D. Chouhan, A. R. Pati, P. Varshney, L. Das, A. Kumar, B. Munshi, A. Behera, and S. S. Mohapatra, "Role of water temperature in case of high mass flux spray cooling of a Hot AISI 304 Steel Plate at different initial surface temperatures", Experimental Heat Transfer, pp.369-392, Taylor & Francis, December 2016,
10.1080/08916152.2016.1269138
Article
A. Behera and S. S. Mohapatra, "Role of water temperature in case of high mass flux spray cooling of a hot AISI 304 steel plate at different initial surface temperatures", Experimental Heat Transfer, Taylor & Francis, December 2016,
10.1080/08916152.2016.1269138
Article
A. Behera, R. Suman, S. Aich, and S. S. Mohapatra, "Sputter-deposited Ni/Ti double-bilayer thin film and the effect of intermetallics during annealing", Surface and Interface Analysis, vol.62, Wiley, December 2016,
10.1002/sia.6201
Article
A. Behera, R. Suman, S. Aich, and S. S. Mohapatra, "Sputter-deposited Ni/Ti double-bilayer thin film and the effect of intermetallics during annealing", Surface and Interface Analysis, John Wiley & Sons, December 2016,
10.1002/sia.6201
Article
P. Parida, S. C. Mishra, S. Sahoo, A. Behera, and B. P. Nayak, "Development and characterization of ethylcellulose based microsphere for sustained release of nifedipine", Journal of Pharmaceutical Analysis, vol.6, no.5, pp.341-344, Elsevier, October 2016,
10.1016/j.jpha.2014.02.001
Article
P. K. Singh, P. K. Katiyar, A. L. Kumar, D. K. Mishra, and A. Behera, "Agglomeration behaviour of solid waste materials of steel plants", Emerging Materials Research, vol.5, no.1, pp.171-176, ICE Publishing 2016,
10.1680/jemmr.15.00014
Article
A. Pattanaik, S. K. Bhuyan, S. K. Samal, A. Behera, and S. C. Mishra, "Dielectric properties of epoxy resin fly ash composite", Materials Science and Engineering, vol.115, IOP Publishing 2016,
10.1088/1757-899X/115/1/012003
Article
A. Behera and S. Aich, "Characterisation and properties of magnetron sputtered nanoscale bi-layered Ni/Ti thin films and effect of annealing", Surface and Interface Analysis, vol.47, no.8, pp.805-814, Wiley, July 2015,
10.1002/sia.5777
Article
A. Behera, A. Behera, S. C. Mishra, S. Pani, and S. Parida, "Air jet erosion test on plasma sprayed surface by varying erodent impingement pressure and impingement angle", Materials Science and Engineering, vol.75, no.1, IOP Publishing, December 2015,
10.1088/1757-899X/75/1/012004
Article
A. Sahua and A. Behera, "Semi-solid processing and tribological characteristics of Al-Cu alloy", Materials Today, vol.2, no.4-5, pp.1175–1182, Elsevier, December 2015,
10.1016/j.matpr.2015.07.029
Article
A. Behera, S. Aich, A. Behera, and A. Sahu, "Processing and characterization of magnetron sputtered Ni/Ti thin film and their annealing behaviour to induce shape memory effect", Materials Today:Proceeding, vol.2, no.4-5, pp.1183-1192, Elsevier 2015,
10.1016/j.matpr.2015.07.030
Article
A. Behera and S. C. Mishra, "Characteristic study of fly-ash+quartz+illmenite composite coating on copper substrate", Emerging Materials Research, vol.2, no.1, pp.39-44, ICE Publishing 2013,
10.1680/emr.12.00025
Article
A. Behera, S. C. Mishra, A. Behera, and J., "Porosity analysis of plasma sprayed mild Steel by application of soft computing", Journal of Materials, vol.2013, no.2013, pp.6, Hindawi Publishing 2013,
10.1155/2013/150671
Article
A. Behera and S. C. Mishra, "A novel material used in automotive industry: compacted graphite iron", Emerging Materials Research, vol.1, no.5, pp.271-274, ICE Publishing, October 2012,
10.1680/emr.12.00002
Article
A. Behera and S. C. Mishra, "Plasma surface Engineering", Lambert, July 2012
Book
A. Behera and S. C. Mishra, "Prediction and analysis of deposition efficiency of plasma spray coating using artificial intelligence method", Open Journal of Composite Materials, vol.2, no.2, pp.54-60, Scientific Research 2012,
10.4236/ojcm.2012.22008
Article