R. K. Sahoo, D. Mohapatra, and S. K. Behera, "Forming Simulation of Bump Foils Used in Complaint Gas Foil Bearings", in Recent Advances in Manufacturing Processes and Systems, pp.503–521, Springer, Singapore, January 2022,
10.1007/978-981-16-7787-8_41
Inproceedings
D. Panda, S. K. Behera, A. K. Satapathy, R. K. Sahoo, and S. K. Sarangi, "A comparative study on thermodynamic aspects of a mechanical drive and pneumatic drive GM cryocooler", Vacuum, vol.199, pp.110938, Elsevier 2022,
10.1016/j.vacuum.2022.110938
Article
D. Panda, S. K. Behera, A. K. Satapathy, and S. K. Sarangi, "Investigations on Thermodynamic Processes of a Novel Pneumatic Drive Asymmetric Gifford-McMahon Cycle Cryorefrigerator", Journal of Energy Resources Technology, vol.144, no.5, pp.052104 (13 s), American Society of Mechanical Engineers 2022,
10.1115/1.4053302
Article
J. Kumar, D. S. Khamari, S. K. Behera, and R. K. Sahoo, "A review of thermohydrodynamic aspects of gas foil bearings", Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, SAGE, December 2021,
10.1177/13506501211062536.
Article
J. Kumar, D. S. Khamari, S. K. Behera, and R. K. Sahoo, "Investigation of thermohydrodynamic behaviour of gas foil journal bearing accounting slip-flow phenomenon", Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol.44, Springer, December 2021,
10.1007/s40430-021-03330-9
Article
J. Kumar, D. S. Khamari, S. K. Behera, and R. K. Sahoo, "A methodology for performance prediction: aerodynamic analysis of axially loaded gas foil bearing", Sådhanå, vol.46, no.193, August 2021,
10.1007/s12046-021-01721-1
Article
J. Kumar, D. S. Khamari, S. K. Behera, and R. K. Sahoo, "Influence of slip-flow phenomenon on thermohydrodynamic behaviour of gas foil thrust bearings", Journal of Engineering Tribology, SAGE, March 2021,
10.1177/13506501211002962
Article
M. Kumar, R. K. Sahoo, D. Panda, and S. K. Behera, "CFD Analysis to Envisage the Fluid Flow Inside a Turboexpander Operating at Cryogenic Temperature", in Advances in Air Conditioning and Refrigeration, pp.79-87, Springer Singapore, February 2021,
10.1007/978-981-15-6360-7_8
Inproceedings
D. S. Khamari, J. Kumar, and S. K. Behera, "Numerical investigation of influence sensitivity of a gas foil bearing parameters on the dynamic coefficients", Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol.43, no.167, pp.1-19, Springer, February 2021,
10.1007/s40430-021-02874-0
Article
S. K. Rout, B. K. Choudhury, S. K. Behera, and S. K. Sarangi, "Development of Indigenous Technology for Large Cooling Capacity GM Cryorefrigerator for Application to High Tc Superconducting Magnets—Prospects and Problems", in Advances in Air Conditioning and Refrigeration, pp.187–194, Springer Singapore, October 2020,
10.1007/978-981-15-6360-7_17
Inproceedings
M. A. Shahdhaar, S. S. Yadawad, D. S. Khamari, and S. K. Behera, "Numerical investigation of slip flow phenomenon on performance characteristics of gas foil journal bearing", SN Applied Sciences, vol.2, no.1677, Springer 2020,
10.1007/s42452-020-03494-4
Article
H. K. Sinha, J. Kumar, D. S. Khamari, and S. K. Behera, "Aerodynamic Analysis of Helium Lubricated Gas Foil Journal bearing", in Proceedings of 64th International Congress of ISTAM, no.pid 70, pp.1-5, Proceedings of 64th International Congress of ISTAM, 64th international congress of istam, December 2019
Inproceedings
M. Kumar, S. K. Behera, A. Kumar, and R. K. Sahoo, "Numerical and experimental investigation to visualize the fluid flow and thermal characteristics of a cryogenic turboexpander", Energy, vol.189, pp.116267, Elsevier, December 2019,
10.1016/j.energy.2019.116267
Article
S. Jena, P. S. Kar, D. S. Khamari, and S. K. Behera, "Rotordynamic Analysis of High-speed Complex Shape Rotor used in Cryogenic Turboexpander", in Proceedings of 64th International Congress of ISTAM, vol.pid 24, pp.1-4, 64th international congress of istam, December 2019
Inproceedings
M. Kumar, D. Panda, A. Kumar, R. K. Sahoo, and S. K. Behera, "A methodology for the performance prediction: flow field and thermal analysis of a helium turboexpander", Journal of the Brazilian Society of Mechanical Sciences and Engineering, November 2019,
10.1007/s40430-019-1989-z
Article
M. Kumar, D. Panda, S. K. Behera, and R. K. Sahoo, "Experimental investigation and performance prediction of a cryogenic turboexpander using artificial intelligence techniques", Applied Thermal Engineering, vol.162, no.5, pp.114273, Elsevier, November 2019,
10.1016/j.applthermaleng.2019.114273
Article
D. S. Khamari, P. S. Kar, S. Jena, J. Kumar, and S. K. Behera, "Rotordynamic Analysis of High-speed Rotor used in Cryogenic Turboexpander using Transfer Matrix Method", in Proceeding of Sixth National Symposium on Rotor Dynamics NSRD-2019, July 2019
Inproceedings
J. Kumar, Ch. Rewant, H. K. Sinha, and S. K. Behera, "Aerodynamic and Thermal Analysis of Bump Type Gas Foil Thrust Bearing for Cryogenic Helium Turboexpander", in Proceedings of TRIBOINDIA-2018 An International Conference on Tribology, SSRN, April 2019,
10.2139/ssrn.3347076
Inproceedings
M. Kumar, R. K. Sahoo, and S. K. Behera, "Design and numerical investigation to visualize the fluid flow and thermal characteristics of non-axisymmetric convergent nozzle", Engineering Science and Technology, an International Journal, vol.22, no.1, pp.294-312, Elsevier, February 2019,
10.1016/j.jestch.2018.10.006
Article
M. Kumar, R. K. Sahoo, and S. K. Behera, "Design and numerical investigation to visualize the fluid flow and thermal characteristics of non-axisymmetric convergent nozzle", Engineering Science and Technology, an International Journal, vol.22, pp.294-312, ELSEVIER, February 2019,
10.1016/j.jestch.2018.10.006
Article
R. Dhakad, B. K. Pradhan, J. Kumar, and S. K. Behera, "Prediction of Stiffness and Damping of Gas Foil Journal Bearing for High-Speed Rotor", in Proceedings of TRIBOINDIA-2018 An International Conference on Tribology, pp.11, SSRN, January 2019,
10.2139/ssrn.3313537
Inproceedings
A. S. Kharche, B. K. Pradhan, D. S. Khamari, and S. K. Behera, "Prediction of the Structural Stiffness of Bump-Type Gas Foil Bearings", in Proceedings of TRIBOINDIA-2018 An International Conference on Tribology, SSRN, January 2019,
10.2139/ssrn.3313482
Inproceedings
M. Kumar, D. Panda, R. Biswal, S. K. Behera, and R. K. Sahoo, "Design and Numerical Investigation to Predict the Flow Pattern of Non-axisymmetric Convergent Nozzle: A Component of Turboexpander", Journal of Traffic and Transportation Engineering, vol.7, pp.264-281, DAVID PUBLISHING 2019,
10.17265/2328-2142/2019.06.003
Article
M. Kumar, R. K. Sahoo, and S. K. Behera, "Design and numerical investigation to visualize the fluid flow and thermal characteristics of non-axisymmetric convergent nozzle", Engineering Science and Technology, an International Journal, vol.22, no.1, pp.294-312, Elsevier 2019,
10.1016/j.jestch.2018.10.006
Article
M. Kumar, D. Panda, R. K. Sahoo, and S. K. Behera, "Experimental investigation and performance prediction of a cryogenic turboexpander using artificial intelligence techniques", Applied Thermal Engineering, vol.162, ELSEVIER 2019,
10.1016/j.applthermaleng.2019.114273
Article
M. Kumar, D. Panda, R. K. Sahoo, and S. K. Behera, "Performance prediction, numerical and experimental investigation to characterize the flow field and thermal behavior of a cryogenic turboexpander", Heat and Mass Transfer, vol.56, pp.1015–1036, Springer 2019,
10.1007/s00231-019-02777-w
Article
M. Kumar, D. Panda, A. Kumar, R. K. Sahoo, and S. K. Behera, "Preliminary design, flow field, and thermal performance analysis of a helium turboexpander: a numerical approach", SN Applied Sciences, vol.265, Spinger 2019,
10.1007/s42452-019-1503-3
Article
S. K. Behera, J. Kumar, and R. K. Sahoo, "Design and Development of Passive Magnetic Bearings for High-Speed Turboexpander", in Proceeding of International Conference on Magnetic Materials and Applications, National Institute of Science Education and Research (NISER), Bhubaneswar, December 2018
Inproceedings
M. Kumar, S. K. Behera, and R. K. Sahoo, "Design and numerical analysis of fluid flow characteristics in a non-axisymmetric convergent nozzle", in Proceeding of Fifth International Conference on Computational Methods for Thermal Problems, March 2018
Inproceedings
D. Krishnatreya, M. Kumar, S. K. Behera, and R. K. Sahoo, "Design and CFD analysis to visualize the flow pattern inside air turbine: A component of turboexpander", in Proceeding of Fifth International Conference on Computational Methods for Thermal Problems, Bangalore, India 2018
Inproceedings
R. K. Sahoo and S. K. Behera, "Design and development of bump-type gas foil journal bearings for cryogenic turboexpander", in Proceedings of Asia International Conference on Tribology 2018, pp.484-486, Malaysian Tribology Society 2018
Inproceedings
S. K. Behera and R. K. Sahoo, "Development of gas foil thrust bearings for high-speed cryogenic turboexpander", in Proceedings of Asia International Conference on Tribology 2018, pp.466-468, malaysian tribology society 2018
Inproceedings
M. R. Pattnayak and S. K. Behera, "Design of Dimensionless Parameters of a Parallel Combination of Capillary restrictor and Membrane type restrictor in single-pad hydrostatic bearing setup to achieve high static stiffness", in Proceeding of 9th International Conference on Industrial Tribology, Tribology Society of India, December 2017
Inproceedings
B. K. Pradhan and S. K. Behera, "Feasibility Studies on Gas Foil Journal Bearings in Helium Turboexpander", in Proceeding of 9th International Conference on Industrial Tribology 2017
Inproceedings
S. K. Behera, S. K. Sarangi, R. K. Sahoo, and T. Singh, "A methodology for fabrication of 2nd generation gas foil thrust and journal bearing for turboexpander used In nitrogen liquefier", in International Conference on Cryogenic Engineering and Cryogenics Materials 2016, New Delhi, India, March 2016
Inproceedings
M. Kumar, S. K. Behera, and A. Kumar, "A numerical analysis of predicting flow pattern inside a turboexpander", in Proceeding of 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power 2016
Inproceedings
K. Kar, S. Sharma, S. K. Behera, and P. Kumar, "Development of rubber pressure molding technique using silicone rubber to fabricate fiber-reinforced plastic components based on glass fiber and epoxy resin", Journal of Elastomers & Plastics, vol.39, no.2, pp.117-129, Sage 2007,
10.1177/0095244306067425
Article
K. Kar, S. Sharma, S. K. Behera, and P. Kumar, "Development of rubber pressure moulding technique using polybutadiene rubber to fabricate fibre reinforced plastic components based on glass fibre and epoxy resin", Current Science, vol.90, no.11, pp.1492-1499, Indian Academy of Sciences 2006
Article
K. Kar, S., S. K. Behera, and P. Kumar, "Development of rubber pressure molding technique using butyl rubber to fabricate fiber reinforced plastic components based on glass fiber and epoxy resin", Journal of Applied Polymer Science, vol.101, no.2, pp.1095–1102, Wiley 2005,
10.1002/app.24005
Article