debasis

Academic Identity

Orcid Id

Scopus Id

16229335400

Researcher Id

Google Scholar Id

CFpNiMwAAAAJ

Debasis Chaira

Professor & HOD (Metallurgical and Materials Engineering)

Metallurgical and Materials Engineering

(+91) 661 246 2561 , 3561

debasis[at]nitrkl.ac.in

Biosketch

33

Publications

6

0

Consultancy Projects

7

Doctoral Students

2

Continuing Education

10

PG Dissertation

Personal Information

Prof. Debasis Chaira

Professor

Metallurgical and Materials Engineering

Joined in Oct 2007

Room Number: CS-203

Department of Metallurgical and Materials Engineering, National Institute of Technology Rourkela, Sundargarh, Odisha, India - 769008

Education Qualification

Ph.D. (IIT Kanpur)

Experience

Laboratory Development

Powder Metallurgy Laboratory, NIT Rourkela, Uniaxial powder compaction press, Turbula shaker mixer, apparent , tap density tester, powder flowability tester, high energy dual drive planetary mill

Expertise Information

Research Group

Composites Materials

Areas of Interest

Nanomaterials, Physical Metallurgy, Composites

Projects

Characterization of Additively Manufactured Maraging Steel 18Ni(300)Built Part: Fabrication and Dynamic Response Analysis of Topologically Optimized Auxetic Prototype Beam Aiming to Alleviate Sesmic Protection of Archeological Heritage Constructions of Odisha.

Science & Technology Department,Govt Of Odisha

Co-Investigator

36 months

Running

Sponsored

Fabrication of nano-oxide dispersed tungsten alloys by mechanical alloying for armaments application

DRDO

Co-Investigator

48 months

Completed

Sponsored

Feasibility of utilizing magnesite deposite of Lakuridada at Lakuri, Nepal.

United Cements Private Limited

Principal Investigator

12 months

Completed

Sponsored

FABRICATION OF TI-TIC METAL MATERIX COMPOSITE FROM WASTE TICHIPS

CSIR

Principal Investigator

36 months

Completed

Sponsored

Synthesis of Cu-Graphite metal matrix composite by powder metallurgy route for electrical contact application

SERB

Principal Investigator

36 months

Completed

Sponsored

Synthesis of nanostructured stainless steel powder by high energy milling and subsequent spark plasma sintering for novel applocation.

CSIR

Principal Investigator

36 months

Completed

Sponsored

Continuing Education

SHORT TERM COURSE ON POWDER METALLURGY: FUNDAMENTALS, APPLICATIONS AND ADVANCEMENT

Metallurgical and Materials Engineering

Coordinator

01 Jul 2019 - 05 Jul 2019

Brochure

Short-term Course

National Conference on Processing and Characterization of Materials (NCPCM–2016)

Metallurgical and Materials Engineering

Coordinator

09 Dec 2016 - 10 Dec 2016

Brochure

Conference

Publications

21

Google Scholar h-index

33

Google Scholar i10-index

9

Scopus h-index

Total Publications: 33

V. Suman and D. Chaira, "Improvement of Oxidation Resistance in Tungsten Heavy Alloys through Si, Y2O3, Ni, and Co Addition", Journal of Materials Engineering and Performance, Springer, June 2023, 10.1007/s11665-023-08366-7 Article

A. R. Khan, A. Patra, D. Chaira, D. A. Babu, and V. Srinivas, "Nano-indentation, residual stress, and oxidation study of spark plasma-sintered tungsten alloys", Journal of Materials Engineering and Performance, Springer, June 2023, 10.1007/s11665-023-08358-7 Article

B. S. Meher, R. Saha, B. Sahoo, and D. Chaira, "Effect of Wet Milling and Reinforcement Content on Iron-Multi-walled Carbon Nanotube Metal Matrix Composite Fabricated by Conventional Powder Metallurgy", Journal of Materials Engineering and Performance, vol.32, Springer, September 2022, 10.1007/s11665-022-07352-9 Article

G. M. Rao, A. M, B. Das, A. R. Khan, A. Patra, and D. Chaira, "Development and Characterization of Nano-Al2O3, Cr2O3, and TiO2 Dispersed Mo Alloys Fabricated by Powder Metallurgy", Journal of Materials Engineering and Performance, Springer Nature, August 2022, 10.1007/s11665-022-07215-3 Article

S. S. Mishra and D. Chaira, "Mechanical Properties and Unlubricated Sliding Wear Behavior Study of Silicon Nitride-Based Cermets", Tribology Transactions, Taylor and Francis, August 2022, 10.1080/10402004.2022.2109545 Article

Show All Publications(+)

B. S. Meher, R. Saha, and D. Chaira, "Fabrication of MWCNTs reinforced iron metal matrix composite by powder metallurgy: Effects of wet and dry milling", Journal of Alloys and Compounds, vol.872, Elsevier, August 2021, 10.1016/j.jallcom.2021.159688 Article

S. S. Mishra, S. K. Karak, and D. Chaira, "Effects of Si and Oxide Additives on Phase Evolution, Microstructure and Mechanical Properties of Si3N4–Mo Cermet Fabricated by Conventional Powder Metallurgy", Metals and Materials International, vol.27, pp.4601-4617, Springer, March 2020, 10.1007/s12540-020-00650-8 Article

P. J. Teja, S. R. Shial, D. Chaira, and M. Masanta, "Development and characterization of Ti-TiC composites by powder metallurgy route using recycled machined Ti chips", Materials Today: Proceedings, vol.26, no.part 2, pp.3292-3296, Elsevier 2020, 10.1016/j.matpr.2020.02.467 Article

S. S. Mishra, D. Chaira, and S. K. Karak, "Effect of Y2O3 and Al2O3 sintering additives during fabrication of Si3N4–Mo–Si cermet by conventional pressure-less sintering", Ceramics International, vol.45, no.16, pp.20555-20565, Elsevier, November 2019, 10.1016/j.ceramint.2019.07.035 Article

S. R. Shial, M. Masanta, and D. Chaira, "Recycling of waste Ti machining chips by planetary milling: generation of Ti powder and development of in situ TiC reinforced Ti-TiC composite powder mixture", Powder Technology, vol.329, pp.232–240, Elsevier, April 2018, 10.1016/j.powtec.2018.01.080 Article

S. R and D. Chaira, "Effect of sintering temperature and atmosphere on nonlubricated sliding wear of nano-yttria-dispersed and yttria-free duplex and ferritic stainless steel fabricated by powder metallurgy", Tribology Transactions, vol.60, no.2, pp.324-336, Taylor and Francis 2017, 10.1080/10402004.2016.1168897 Article

P. Sahani and D. Chaira, "Nonlubricated sliding wear behavior study of SiC–B4C–Si cermet against a diamond indenter", Journal of Tribology, vol.139, no.5, pp.13, ASME 2017, 10.1115/1.4035344 Article

R. Shashanka, D. Chaira, and D. Chakravarty, "Fabrication of Nano-Yttria dispersed duplex and Ferritic stainless steels by planetary milling followed by spark plasma sintering and non-lubricated sliding wear behaviour study", Journal of Materials Science and Engineering B, vol.6, no.5-6, pp.111-125, David Publishing, November 2016, 10.17265/2161-6221/2016.5-6.001 Article

P. Sahani, S. K. Karak, B. Mishra, D. Chakravarty, and D. Chaira, "A comparative study on SiC-B4C-Si cermet prepared by pressureless Sintering and spark plasma sintering methods", Metallurgical and Materials Transactions A, vol.47, no.6, pp.3065-3076, Springer, June 2016, 10.1007/s11661-016-3401-2 Article

P. Sahani, S. K. Karak, B. Mishra, D. Chakravarty, and D. Chaira, "Effect of Al addition on SiC-B4C cermet prepared by pressureless sintering and spark plasma sintering methods", International Journal of Refractory Metals and Hard Materials, vol.57, pp.31-41, Elsevier, June 2016, 10.1016/j.ijrmhm.2016.02.005 Article

P. Sahani, S. K. Karak, B. Mishra, D. Chakravarty, and D. Chaira, "Effect of Al addition on SiC–B4C cermet prepared by pressureless sintering and spark plasma sintering methods", International Journal of Refractory Metals and Hard Materials, vol.57, pp.31-41, Elsevier, June 2016, 10.1016/j.ijrmhm.2016.02.005 Article

A. K. Nayak, S. R, and D. Chaira, "Effect of nanosize Yittria and Tungsten addition to duplex stainless steel during high energy planetary milling", in 5th National Conference on Processing and Characterization of Materials, vol.115, no.1, pp.1-9, IOP Publishing, materials science and engineering, NIT, Rourkela, March 2016, 10.1088/1757-899X/115/1/012008 Inproceedings

S. R, D. Chaira, and B., "Fabrication of yttria dispersed duplex stainless steel electrode to determine dopamine, ascorbic and uric acid electrochemically by using cyclic voltammetry", International Journal of Scientific & Engineering Research, vol.7, no.3, pp.1275-1284, IJSER, March 2016 Article

S. R and D. Chaira, "Effects of nano-Y2O3 and sintering parameters on the fabrication of PM duplex and ferritic stainless steels", Acta Metallurgica Sinica (English Letters), vol.29, no.1, pp.58-71, Elsevier, January 2016, 10.1007/s40195-015-0362-1 Article

S. R and D. Chaira, "Optimization of milling parameters for the synthesis of nano-structured duplex and ferritic stainless steel powders by high energy planetary milling", Powder Technology, vol.278, pp.35-45, Elsevier, July 2015, 10.1016/j.powtec.2015.03.007 Article

S. R and D. Chaira, "Development of nano-structured duplex and ferritic stainless steels by pulverisette planetary milling followed by pressureless sintering", Materials Characterization, vol.99, pp.220-229, Elsevier, January 2015, 10.1016/j.matchar.2014.11.030 Article

S. R, D. Chaira, and B., "Electrocatalytic response of duplex and yittria dispersed duplex stainless steel modified carbon paste electrode in detecting folic acid using cyclic voltammetry", International Journal of Electrochemical Science, vol.10, no.7, pp.5586-5598, Electrochemical Science Group, December 2015 Article

S. Gupta, S. R, and D. Chaira, "Synthesis of nano-structured duplex and ferritic stainless steel powders by planetary milling: An experimental and simulation study", in NCPCM 2014, vol.75, no.1, Institute of Physics Publishing 2015, 10.1088/1757-899X/75/1/012033 Inproceedings

T. Mandal, B. K. Mishra, A. Garg, and D. Chaira, "Optimization of milling parameters for the mechanosynthesis of nanocrystalline hydroxyapatite", Powder Technology, vol.253, pp.650-656, Elsevier, February 2014, 10.1016/j.powtec.2013.12.026 Article

G. Parida, D. Chaira, and A. Basu, "Ni-ZrO2 composite coating by electro-co-deposition", Transactions of the Indian Institute of Metals, vol.66, no.1, pp.5-11, Springer, November 2013, 10.1007/s12666-012-0161-6 Article

K. Dash, B. C. Ray, and D. Chaira, "Synthesis and characterization of copper-alumina metal matrix composite by conventional and spark plasma sintering", Journal of Alloys and Compounds, vol.516, pp.78-84, Elsevier, March 2012, 10.1016/j.jallcom.2011.11.136 Article

D. Chaira, S. Sangal, and B., "Efficient synthesis and characterization of nanostructured TiC powder by reaction milling", Transactions of the Indian Institute of Metals, vol.64, no.6, pp.549-554, Springer, December 2011, 10.1007/s12666-011-0080-y Article

G. Parida, D. Chaira, M. Chopkar, and A. Basu, "Synthesis and characterization of Ni-TiO2 composite coatings by electro-co-deposition", Surface and Coatings Technology, vol.205, no.21-22, pp.4871-4879, Elsevier, August 2011, 10.1016/j.surfcoat.2011.04.102 Article

S. Samal, B. Satpati, and D. Chaira, "Production and dispersion stability of ultrafine Al-Cu alloy powder in base fluid", Journal of Alloys and Compounds, vol.504, pp.s389-s394, Elsevier, August 2010, 10.1016/j.jallcom.2010.03.223 Article

D. Chaira, B. Mishra, and S. Sangal, "Efficient synthesis and characterization of iron carbide powder by reaction milling", Powder Technology, vol.191, no.1-2, pp.149-154, Elsevier 2009, 10.1016/j.powtec.2008.09.020 Article

D. Chaira, B. Mishra, and S. Sangal, "Magnetic properties of cementite powder produced by reaction milling", Journal of Alloys and Compounds, vol.474, no.1-2, pp.396-400, Elsevier 2009, 10.1016/j.jallcom.2008.06.099 Article

D. Chaira, B. Mishra, and S. Sangal, "Synthesis and characterization of silicon carbide by reaction milling in a dual-drive planetary mill", Materials Science and Engineering: A, vol.460-461, pp.111-120, Elsevier 2007, 10.1016/j.msea.2007.01.080 Article

Hide Publications (-)

Courses Taught

MM2107 : Basic Physical Metallurgy {Theory}
MM257 : Non Metallic Materials {Theory}
MM3503 : Material Characterization Techniques {Theory}
MM357 : Corrosion and Degradation of Materials and Their Prevention {Theory}
MM358 : Experimental Techniques in Materials Engineering {Theory}
MM358 : Expermental Techniques in Materials Engineering {Theory}
MM449 : Nanostructured Materials {Theory}
MM4512 : Materials Characterization Techniques {Theory}
MM606 : X - Ray and Electron Microscopy {Theory}
MM6112 : Phase Transformation {Theory}
MM615 : Structure and Properties of Materials {Theory}
MM642 : Materials Engineering {Theory}
MM652 : Experimental Techniques in Materials Engineering {Theory}
MM6521 : Powder Technology {Theory}
MM665 : Powder Technology {Theory}
MM271 : Mineral Dressing Laboratory {Practical}
MM273 : Polymer Laboratory {Practical}
MM3521 : Characterization of Materials Laboratory {Practical}
MM3523 : Characterization of Materials Laboratory {Practical}
MM6171 : Phase Transformation Laboratory {Practical}
MM672 : Experimental Techniques in Materials Engineering Laboratory {Practical}
MM674 : Material Science Laboratory {Practical}

Research Scholars

Ph.D. Students [5]

Fabrication of Nano-Structured Duplex And Ferritic Stainless Steel by Planetary Milling Followed By Consolidation

Shashanka R

Enrolled: Nov 2011

Graduated : Aug 2016

Supervisor

Fabrication of SiC-B₄C-Si and SiC-B₄C-Al Cermets by Powder Metallurgy Route

Pankajini Sahani

Enrolled: Jul 2010

Graduated : May 2017

Supervisor

Role of Y₂O₃ and Al₂O₃ Additive during Fabrication of Si₃N₄-Mo, Si₃N₄-Mo-Si and Si₃N₄-Mo-Al Cermets by Powder Metallurgy

Sushree Sefali Mishra

Enrolled: Jan 2017

Graduated : Apr 2022

Supervisor

Effect of different mixing methods on Fe-MWCNTs MMC fabricated by conventional powder metallurgy

Bhabani Shankar Meher

Enrolled: Jan 2017

Thesis Submitted : Jun 2023

Supervisor

Effect of Silicon and Y2O3 on Densification, Mechanical Properties and Isothermal Oxidation Behaviour of W-10Ni-3Co alloys Fabricated by Powder Metallurgy

Vadla Suman

Enrolled: Jul 2018

Thesis Submitted : Jul 2023

Supervisor

Executive Ph.D. Students [2]

Seismic safety of building

Padmabati Sahoo

Continuing

Co-Supervisor

Powder Metallurgy

Jayram Barik

Continuing

Supervisor

Dissertations

PG Dissertation

Arabinda Meher (213MM1472), "Synthesis and Characterization of Cu-graphite-SiC Hybrid Metal Matrix Composite Prepared by Powder Metallurgy Route" - M.Tech. Supervisor 2014-15 Spring
Avinas Kumar Nayak (214MM1341), "Effect of compact height and compaction pressure on densification of tungsten dispersed and yttria dispersed duplex stainless steel fabricated by high energy planetary milling followed by conventional sintering" - M.Tech. Supervisor 2015-16 Spring
Biswajita Mishra (215MM2245), "Deformation behaviour study of Cu-graphite, Cu-graphite-SiC metal matrix composite prepared by powder metallurgy" - M.Tech. Supervisor 2016-17 Spring
Goudu Ravi Kiran (216MM1432), "Fabrication of Iron-Copper-graphite alloy by powder metallurgy for automobile applications" - M.Tech. Supervisor 2017-18 Spring
Pradeep Kumar Prajapati (216MM2452), "FABRICATION OF COPPER - BORON CARBIDE COMPOSITES BY POWDER METALLURGY" - M.Tech. Supervisor 2017-18 Spring
Shiv Kumar (217MM1453), "Fabrication and Characterization of Si3N4-Mo-Al Cermet with Different wt. % of Sintering Additives" - M.Tech. Supervisor 2018-19 Spring
N Wilson Singh (218MM1474), "Fabrication and characterization of TiC- Stainless steel cermet by melt infiltration" - M.Tech. Supervisor 2019-20 Spring
Naveen S Das (219MM1576), "Recycling of Al 8011 Alloy chips using powder metallurgy route" - M.Tech. Supervisor 2020-21 Spring
Gokarakonda Veera Venkata Trimurthulu (220MM1485), "STUDY OF USING 8011 ALUMINIUM ALLOY WASTE CHIPS IN POWDER METALLURGY" - M.Tech. Supervisor 2021-22 Spring
Maitreya Panachand Fulmali (221MM1597), "Fabrication of Tungsten Heavy Alloys reinforced with Iron Aluminide and Cr2AlC (MAX Phase) by Powder Metallurgy" - M.Tech. Supervisor 2022-23 Spring

UG Dissertation

Akash Agarwal (111MM0386), "SYNTHESIS OF IRON OXIDE PIGMENT BY PLANETARY MILLING" - B.Tech. Supervisor 2014-15 Spring
Mani Bhushan (111MM0358), "SYNTHESIS OF IRON OXIDE PIGMENT BY PLANETARY MILLING" - B.Tech. Supervisor 2014-15 Spring
Akash Ranjan Pradhan (112MM0441), "Utilization of Steel Scrap through Powder Metallurgy Route" - B.Tech. Supervisor 2015-16 Spring
Shivam Sisodiya (112MM0475), "Utilization of Steel Scrap through Powder Metallurgy Route" - B.Tech. Supervisor 2015-16 Spring
Sriharsha Mangu (110MM0523), "Utilization of Steel Scrap through Powder Metallurgy Route" - B.Tech. Supervisor 2015-16 Spring
Nihar Ranjan Panigrahi (113MM0457), "Synthesis and Characterization of Titanium Carbide and Iron Carbide from elemental powders." - B.Tech. Supervisor 2016-17 Spring
Sohan Kumar Sahoo (113MM0462), "Synthesis and Characterization of Titanium Carbide and Iron Carbide from elemental powders." - B.Tech. Supervisor 2016-17 Spring
Kamma Sai Venkat (113MM0433), "Combustion Synthesis of Titanium Carbide from Titanium and Graphite Powder" - B.Tech. Supervisor 2017 Summer
K Chandan Rao (114MM0266), "Fabrication and characterization of Ti-TiC Metal Matrix Composite by Mechanical Alloying" - B.Tech. Supervisor 2017-18 Spring
Mukesh Kumbhakar (114MM0258), "Fabrication and characterization of Ti-TiC Metal Matrix Composite by Mechanical Alloying" - B.Tech. Supervisor 2017-18 Spring
Abhishek Patra (115MM0667), "Fabrication of 0.5 vol. % MWCNTs reinforced Fe Metal Matrix Composite by Powder Metallurgy: Study of Effect of Milling Medium and Sintering Temperature on Physical, Microstructural and Mechanical Properties of Synthesized Composites" - B.Tech. Supervisor 2018-19 Spring
Nitesh Kumar Gouda (115MM0491), "Fabrication of 0.5 vol. % MWCNTs reinforced Fe Metal Matrix Composite by Powder Metallurgy: Study of Effect of Milling Medium and Sintering Temperature on Physical, Microstructural and Mechanical Properties of Synthesized Composites" - B.Tech. Supervisor 2018-19 Spring
Pratyush Ranjan Samantaray (115MM0512), "Fabrication of 0.5 vol. % MWCNTs reinforced Fe Metal Matrix Composite by Powder Metallurgy: Study of Effect of Milling Medium and Sintering Temperature on Physical, Microstructural and Mechanical Properties of Synthesized Composites" - B.Tech. Supervisor 2018-19 Spring
Abhishek Behera (116MM0515), "Fabrication of MWCNTs reinforced Fe Metal Matrix Composite by Powder Metallurgy" - B.Tech. Supervisor 2019-20 Spring
Banoth Bhavani (116MM0520), "Fabrication of MWCNTs reinforced Fe Metal Matrix Composite by Powder Metallurgy" - B.Tech. Supervisor 2019-20 Spring
Gondu Naveen (116MM0535), "Development of Oxide Dispersion Strengthened Alloys by Powder Metallurgy: Study of the Effect of Milling Time and Medium on the Mechanical and Microstructural Properties of the Fabricated Alloys" - B.Tech. Supervisor 2019-20 Spring
Prabhudananda Das (116MM0522), "Fabrication of MWCNTs reinforced Fe Metal Matrix Composite by Powder Metallurgy" - B.Tech. Supervisor 2019-20 Spring
Sachin Indlia (116MM0525), "Development of Oxide Dispersion Strengthened Alloys by Powder Metallurgy: Study of the Effect of Milling Time and Medium on the Mechanical and Microstructural Properties of the Fabricated Alloys" - B.Tech. Supervisor 2019-20 Spring
Ankit Sahoo (117MM0636), "Fabrication of Fe MWCNT metal matrix composite via Powder Metallurgy Route" - B.Tech. Supervisor 2020-21 Spring
Chinmay Kabi (117MM0596), "Fabrication of Fe MWCNT metal matrix composite via Powder Metallurgy Route" - B.Tech. Supervisor 2020-21 Spring
Harsh Khirwal (117MM0613), "Fabrication of Fe MWCNT metal matrix composite via Powder Metallurgy Route" - B.Tech. Supervisor 2020-21 Spring
Ashutosh Pandey (118MM0539), "Fabrication of MWCNTs Reinforced Cu-1 wt. % Ti Alloy Composite by Powder Metallurgy" - B.Tech. Supervisor 2021-22 Spring
Pratyush Sadangi (118MM0635), "Fabrication of MWCNTs Reinforced Cu-1 wt. % Ti Alloy Composite by Powder Metallurgy" - B.Tech. Supervisor 2021-22 Spring
Sourav Kumar Sah (118MM0544), "Fabrication of MWCNTs reinforced Cu-1wt. % Ti alloy composite by Powder Metallurgy" - B.Tech. Supervisor 2021-22 Spring
Ashwani Kumar Singh (117MM0724), "Fabrication of MWCNTs reinforced Cu-1 wt. % Ti alloy Composite by Powder Metallurgy" - B.Tech. Supervisor 2022 Summer
Bibhuti Bhusan Kar (119MM0393), "Recycling of 24345 Aluminum Alloy Chips by Powder Metallurgy" - B.Tech. Supervisor 2022-23 Spring
Rohit Mohanty (119MM0757), "Recycling of 24345 Aluminum Alloy Chips by Powder Metallurgy" - B.Tech. Supervisor 2022-23 Spring
Satyabrata Sahoo (119MM0762), "Recycling of 24345 Aluminum Alloy Chips by Powder Metallurgy" - B.Tech. Supervisor 2022-23 Spring
Subhadip Shit (119MM0764), "Recycling of 24345 Aluminum Alloy Chips by Powder Metallurgy" - B.Tech. Supervisor 2022-23 Spring
Shalabh Gupta (710MM1169), "Synthesis of nano-structured Duplex and Ferritic stainless steel powders by planetary milling: An experimental and simulation study" - B.Tech. M.Tech Dual Degree Supervisor 2014-15 Spring
Prasanna Verma (712MM1162), "Utilization of Waste Steel Chips in Powder Metallurgy" - B.Tech. M.Tech Dual Degree Supervisor 2016-17 Spring
Bushra Negar Alam (713MM1108), "Recycling of waste Titanium chips: Synthesis of Titanium Powder and Ti-TiCnanocomposites by planetary milling followed by Spark Plasma Sintering" - B.Tech. M.Tech Dual Degree Supervisor 2017-18 Spring
Bismay Kumar Sahoo (714MM1032), "Fabrication of 2 vol. % MWCNTs reinforced Fe Metal Matrix Composite by Powder Metallurgy: Study of Effect of Milling on Physical, Microstructural and Mechanical Properties of Synthesized Composites." - B.Tech. M.Tech Dual Degree Supervisor 2018-19 Spring
Sridhar Parida (715MM1155), "Fabrication and Characterization of TiC-Steel Cermet by Powder Technology route" - B.Tech. M.Tech Dual Degree Supervisor 2019-20 Spring
Sridhar Parida (715MM1155), "Fabrication and Characterization of TiC-Steel Cermet by Powder Technology route" - B.Tech. M.Tech Dual Degree Supervisor 2020 Summer
Pratyush Ranjan (717MM1020), "Effect of ZrB2 addition on densification, microstructure, distortion, and mechanical properties of 90W-6Ni-2Fe-2Co and NiB substituted heavy alloys" - B.Tech. M.Tech Dual Degree Supervisor 2021-22 Spring
Dibyakanta Behera (718MM1030), "Development of MWCNTs reinforced Cu-1 wt. % Ti metal matrix composite by tailoring formation of TiC at the interface between Cu and CNT." - B.Tech. M.Tech Dual Degree Supervisor 2022-23 Spring

Awards and Honours

Supervisor of Grand PMAI student award awarded by Powder metallurgy association of India (PMAI), 2015
2nd prize in a business competition (IDEAZ 2006) awarded by The PAN IIT business idea challenge, 2006
University Gold Medal for standing 1st in M.E., Jadavpur University, 2001
Qualified GATE 2000, 2000
National award in class VIII, awarded by WBBSE, 1990

Memberships / Fellowships

Indian Institute of Metals, The Institution of Engineers (India), 2012

Academic Identity

Orcid Id

Scopus Id

Researcher Id

Google Scholar Id

Debasis Chaira

33

Publications

6

Sponsored Projects

0

Consultancy Projects

7

Doctoral Students

2

Continuing Education

10

PG Dissertation

Personal Information

Prof. Debasis Chaira

Education Qualification

Experience

Laboratory Development

Expertise Information

Research Group

Areas of Interest

Projects

Continuing Education

Publications

21

Google Scholar h-index

33

Google Scholar i10-index

9

Scopus h-index

Total Publications: 33

Courses Taught

Research Scholars

Ph.D. Students [5]

Executive Ph.D. Students [2]

Dissertations

PG Dissertation

UG Dissertation

Awards and Honours

Awards and Honours

Memberships / Fellowships