K. S. Chandra and D. Sarkar, "Oxidation resistance, residual strength, and microstructural evolution in Al2O3-MgO–C refractory composites with YAG nanopowder", Journal of the European Ceramic Society, Elsevier 2021,
10.1016/j.jeurceramsoc.2021.01.021
Article
P. Verma, D. Sarkar, P. Rajput, M. N. Singh, R. Sharma, and S. Giri, "Structural insights on Li+ doped P 6 [combining macron] crystals of upconverting NaYF 4: Yb 3+/M 3+(M 3+= Er 3+ or Tm 3+) through extensive synchrotron radiation-based X-ray probing", CrystEngComm, vol.23, no.48, pp.8631-8640, RSC 2021,
10.1039/D1CE01253C
Article
M. Raju, S. Sen, D. Sarkar, and C. Jacob, "Synthesis of 3C-silicon carbide 1D structures by carbothermal reduction process", Journal of Alloys and Compounds, vol.857, no.158243, pp.11, Elsevier 2021,
10.1016/j.jallcom.2020.158243
Article
S. A. Basha, A. K. Agrawal, and D. Sarkar, "Tailor-made design, fabrication and validation of SrO doped nanostructured ZTA ceramic Femoral head–Acetabular socket liner assembly", Journal of the Mechanical Behavior of Biomedical Materials, vol.114, no.104178, pp.10, Elsevier 2021,
10.1016/j.jmbbm.2020.104178
Article
S. A. Basha, K. S. Chandra, and D. Sarkar, "Salient features of SrO doping in Al2O3 – 5 wt.% ZrO2 reaction sintered composite ceramics", Journal of Alloys and Compounds, vol.829, pp.154559, Elsevier, July 2020,
10.1016/j.jallcom.2020.154559
Article
S. A. Basha and D. Sarkar, "Grain growth suppression of ZTA by multi-step sintering", Materials today: Proceedings, vol.26, no.2, pp.1226-1230, Elsevier, March 2020,
https://doi.org/10.1016/j.matpr.2020.02.246
Article
S. A. Basha and D. Sarkar, "Competitive life time assessment of SrO-ZTA/SrO-ZTA and CoCrMo/UHMWPE hip prosthesis bearings, J of Mechanics in Medicine and Biology", J of Mechanics in Medicine and Biology, vol.20, no.3, pp.2050009, World Scientific, January 2020,
https://doi.org/10.1142/S0219519420500098
Article
S. A. Basha and D. Sarkar, "Critical load and wear regime of hydrothermal-aged SrO-doped ZTA composite", International Journal of Modern Physics B, vol.35, no.1, pp.2150016, World Scientific 2020,
10.1142/S0217979221500168
Article
S. Biswas and D. Sarkar, "Introduction to Refractories for Iron and Steel Making", Springer 2020
Book
K. S. Chandra and D. Sarkar, "Structural properties of Al2O3-MgO-C refractory composites improved with YAG nanoparticle hybridized expandable graphite", Elsevier, vol.803, pp.140502, Materials Science and Engineering: A 2020,
10.1016/j.msea.2020.140502
Article
D. Sarkar, "Ceramic Processing: Industrial Practices", CRC Press, New York USA, July 2019
Book
A. B. Shaik and D. Sarkar, "Dynamic Analysis and Life Estimation of the Artificial Hip Joint Prosthesis", Advanced Engineering Optimization Through Intelligent Techniques, ch.265, vol.949, pp.265-274, Springer, advances in intelligent systems and computing, July 2019,
10.1007/978-981-13-8196-6_25
Inbook
P. Saha and D. Sarkar, "Whiteware and glazes", Ceramic Processing Industrial Practices, ch.7, pp.31, CRC Press, June 2019,
10.1201/9781315145808-7
Inbook
S. A. Basha and D. Sarkar, "Finite Element Analysis and Theoretical Wear Behaviour for Total Hip Replacement", Emerging Trends in Mechanical Engineering, ch.93, pp.93-103, Springer, lecture notes in mechanical engineering 2019,
10.1007/978-981-32-9931-3
Inbook
P. Saha and D. Sarkar, "Miniaturization of complex ceramics", Ceramic Processing Industrial Practices, ch.9, pp.284-319, CRC Press 2019,
10.1201/9781315145808-9
Inbook
P. Verma, D. Sarkar, P. Rajput, M. N. Singh, R. Sharma, and S. Giri, "Synchrotron-based X-Ray analysis: Relating Compressive Lattice Strain with the Photoluminescence Intensity of Li+ Doped ß-NaYF4:Yb3+/Ln3+ (Ln3+=Ho3+/Er3+/Tm3+) Upconversion Crystals", Crystal Growth & Design, vol.20, pp.468, ACS 2019,
https://doi.org/10.1021/acs.cgd.9b01426
Article
S. K. Swain and D. Sarkar, "Fabrication, bioactivity, in vitro cytotoxicity and cell viability of cryo-treated nanohydroxyapatite–gelatin–polyvinyl alcohol macroporous scaffold", Journal of Asian Ceramic Societies, vol.2, no.3, Taylor and Francis Online, April 2018,
10.1016/j.jascer.2014.05.003
Article
S. Adhikari, Ak. Mishra, and D. Sarkar, "Ceramic based nanomaterials for multifunctional application", Smart Ceramics: Preparation, properties and applications, ch.3, pp.73-120, Taylor and francis 2018
Inbook
S. Adhikari, N., A., D. Sarkar, and G. Madras, "Functionally active nanomaterials for environmental remediation", 'Nanotechnology in Environmental Science, ch.9, vol.1,2, pp.293-314, Wiley-VCH 2018
Inbook
D. Sarkar, B. S. Reddy, and B. Basu, "Implementing statistical modelling approach towards development of ultrafine grained bioceramics: Case of ZrO2-toughened Al2O3", Journal of American Ceramic Society, vol.101, no.3, pp.1333-1343, Wiley online library 2018,
10.1111/jace.15255
Article
S. Adhikari, N., S. S. Priyadarsini, D. Sarkar, and G. Madras, "Investigation of nano Ag-decorated SiC particles for photoelectrocatalytic dye degradation and bacterial inactivation", Journal of Photochemistry and Photobiology A: Chemistry, vol.357, pp.118-131, Elsevier 2018,
10.1016/j.jphotochem.2018.02.017
Article
K. S. Chandra, M. Monalisa, C. A. Chowdary, G. Ghosh, and D. Sarkar, "Microstructure and Mechanical Behaviour of SrO doped Al2O3 Ceramics", Materials Science and Engineering A, vol.739, pp.186-192, Elsevier 2018,
10.1016/j.msea.2018.10.038
Article
D. Sarkar, "Nanostructured Ceramics: Characterization and Analysis", Taylor and Francis 2018,
10.1201/9781315110790
Book
N. Bhaskar, D. Sarkar, and B. Basu, "Probing Cytocompatibility, Hemocompatibility, and Quantitative Inflammatory Response in Mus musculus toward Oxide Bioceramic Wear Particulates and a Comparison with CoCr", ACS Biomaterials Science and Engineering, vol.4, no.9, pp.3194-3210, ACS Publications 2018,
10.1021/acsbiomaterials.8b00583
Article
S. Adhikari, K. S. Chandra, D. Sarkar, D., and G. Madras, "Understanding the morphological effects of WO3 photocatalysts for the degradation of organic pollutants", Advanced Powder Technology, vol.29, no.7, pp.1591-1600, Elsevier 2018,
10.1016/j.apt.2018.03.024
Article
K. Ravi, D. Sarkar, and B. Basu, "ZrO2 toughened Al2O3 composites with better fracture and wear resistance properties", Journal of Biomaterials Applications, vol.32, no.9, SAGE Publications 2018,
10.1177/0885328217750820
Article
T. Satish and D. Sarkar, "Computer-aided design, finite element analysis and material-model optimisation of knee prosthesis", Journal of the Australian Ceramic Society, vol.54, pp.429-438, Springer 2017,
10.1007/s41779-017-0169-9
Article
S. Adhikari, D. Sarkar, and G. Madras, "Hierarchical design of CuS architectures for visible light photocatalysis of 4-chlorophenol", ACS Omega, vol.2, no.7, pp.4009-4021, ACS Publications 2017,
10.1021/acsomega.7b00669
Article
S. Adhikari, S. Mandal, D. Sarkar, D., and G. Madras, "Kinetics and Mechanism of Dye Adosrption on WO3 nanoparticles", Applied Surface Science, vol.420, pp.472-482, Elsevier 2017,
10.1016/j.apsusc.2017.05.191
Article
D. Sarkar, B. S. Reddy, S. Mandal, and B. Basu, "PATIENT SPECIFIC NEAR-NET SHAPED UNIAXIALLY PRESSED CERAMIC FEMORAL HEAD AND ACETABULAR SOCKET, AND FABRICATION METHOD THEREOF", World Intellectual Property Organization, vol.a1, no.wo2017134614a1, pp.61 2017
Misc
K. S. Chandra, M. Monalisa, G. Ulahannan, D. Sarkar, and H., "Preparation of YAG Nanopowder by Different Routes and Evaluation of their Characteristics including Transparency after Sintering", Journal of the Australian Ceramic Society volume, vol.53, pp.751-760, Springer 2017,
10.1007/s41779-017-0088-9
Article
S. Adhikari, R. Swain, D. Sarkar, and G. Madras, "Wedge-like WO3 architectures for efficient electrochromism and photoelectrocatalytic activity towards water pollutants", Molecular Catalysis, vol.432, pp.76-87, Elsevier 2017,
10.1016/j.mcat.2017.02.009
Article
D. Sarkar, S. Mandal, B. S. Reddy, N. Bhaskar, D. Sundaresh, and B. Basu, "ZrO2-toughened Al2O3-based near-net shaped femoral head: Unique fabrication approach, 3D microstructure, burst strength", Materials Science and Engineering: C, vol.77, pp.1216-1227, Elsevier 2017,
10.1016/j.msec.2017.03.123
Article
D. Sarkar, B. S. Reddy, S. Mandal, M. Ravisankar, and B. Basu, "Uniaxial compaction based manufacturing strategy and 3D microstructural evaluation of near-net shaped ZrO2-toughened Al2O3 acetabular socket", Advanced Engineering Materials, vol.18, no.9, pp.1634-1644, Wiley online library 2016,
10.1002/adem.201600147
Article
S. Adhikari, R. Gupta, A. Surin, T. S. Kumar, D. Sarkar, S. Chakraborty, and G. Madras, "Visible light assisted improved photocatalytic activity of combustion synthesized spongy-ZnO towards dye degradation and bacterial inactivation", RSC Advances, vol.6, pp.80086-80098, Royal Society of Chemistry 2016,
10.1039/C6RA10472J
Article
S. Adhikari and D. Sarkar, "Metal Oxide Semiconductors for Dye Degradation", Materials Research Bulletin, vol.72, pp.220-228, Elsevier, December 2015,
10.1016/j.materresbull.2015.08.009
Article
S. Adhikari and D. Sarkar, "Preparation of Mixed Semiconductors for Methyl Orange Degradation", Journal of Nanomaterials, vol.2015, Hindawi, October 2015,
10.1155/2015/269019
Article
. S. Adhikari and D. Sarkar, "Fabrication of porous hydroxyapatite scaffold via polyethylene glycol-polyvinyl alcohol hydrogel state", Materials Research Bulletin, vol.64, pp.257-261, Elsevier, April 2015,
10.1016/j.materresbull.2014.12.072
Article
S. Adhikari and D. Sarkar, "Confined Growth of WO3 for High-Performance Electrochromic Device", Key Engineering Materials, vol.659, pp.583-587, Trans Tech Publications 2015,
10.4028/www.scientific.net/KEM.659.583
Article
S. Adhikari, D. Sarkar, and G. Madras, "Highly efficient WO3–ZnO mixed oxides for photocatalysis", RSC Advances, vol.5, pp.11895-11904, Royal Society of Chemistry 2015,
10.1039/C4RA13210F
Article
S. Adhikari, A. Banerjee, K., D. Sarkar, and G. Madras, "Photocatalytic inactivation of E. Coli by ZnO–Ag nanoparticles under solar radiation", RSC Advances, vol.5, pp.51067-51077, Royal Society of Chemistry 2015,
10.1039/C5RA06406F
Article
S. Adhikari and D. Sarkar, "Synthesis and Electrochemical Properties of Nanocuboid and Nanofiber WO3", Journal of The Electrochemical Society, vol.162, no.1, IOP Science, November 2014,
10.1149/2.0881501jes/meta
Article
S. Adhikari, D. Sarkar, and G. Madras, "Synthesis and Photocatalytic performance of Quasi-fibrous ZnO", RSC Advances, vol.4, pp.55807-55814, Royal Society of Chemistry, October 2014,
10.1039/C4RA09376C
Article
S. Adhikari and D. Sarkar, "High Efficient Electrochromic WO3 Nanofibers", Electrochimica Acta, vol.138, pp.115-123, Elsevier, August 2014,
10.1016/j.electacta.2014.06.062
Article
S. Adhikari and D. Sarkar, "Hydrotermal synthesis and Electrochromism of WO3nanocuboids", RSC Advances, vol.4, pp.20145-20153, Royal Society of Chemistry, April 2014,
10.1039/C4RA00023D
Article
S. Adhikari and D. Sarkar, "Synthesis and Characterization of WO3 Spherical Nanoparticles and Nanorods", Materials Research Bulletin, vol.49, pp.325-330, Elsevier, January 2014,
10.1016/j.materresbull.2013.08.028
Article
Sk. Swain and D. Sarkar, "Preparation of nanohydroxyapatite – gelatin porous scaffold and mechanical properties at cryogenic environment", Materials Letters, vol.92, no.1, pp.252-254, Elsevier, February 2013,
10.1016/j.matlet.2012.11.016
Article
B. Basu, S. K. Swain, and D. Sarkar, "Cryogenically cured Hydroxyapatite-gelatin nanobiocomposite for BSA Protein adsorption/release", RSC Advances, vol.3, pp.14622-14633, Royal Society of Chemistry 2013,
10.1039/C3RA42369G
Article
S. K. Swain and D. Sarkar, "Study of BSA protein adsorption/release behavior of hydroxyapatite nanoparticles", Applied Surface Science, vol.286, pp.99-103, Elsevier 2013,
10.1016/j.apsusc.2013.09.027
Article
D. Sarkar, S. K. Swain, S. Adhikari, B. S. Reddy, and H. S. Maiti, "Synthesis, mechanical properties and bioactivity of nanostructured zirconia", Materials Science and Engineering: C, vol.33, no.6, pp.3413-3417, Elsevier 2013,
10.1016/j.msec.2013.04.036
Article
S. K. Swain, S. V. Dorozhkin, and D. Sarkar, "Synthesis and Dispersion of Hydroxyapatite Nanopowders", Materials Science and Engineering: C, vol.32, pp.1237-1240, Elsevier 2012,
10.1016/j.msec.2012.03.014
Article
Sk. Swain and D. Sarkar, "A Comparative Study: Hydroxyapatite Spherical Nano Powders and Elongated Nano Rods", Ceramics International, vol.37, no.7, pp.2927-2930, Elsevier, September 2011,
10.1016/j.ceramint.2011.03.077
Article
Sk. Swain, S. Bhattacharyya, and D. Sarkar, "Preparation of Porous Scaffold from Hydroxyapatite Powders", Materials Science and Engineering: C, vol.31, no.6, pp.1240-1244, Elsevier, August 2011,
10.1016/j.msec.2010.11.014
Article
D. Sarkar, "Synthesis and Properties of BaTiO3Nanopowders", Journal of the American Ceramic Society, vol.94, no.1, pp.106-110, Wiley online library, January 2011,
10.1111/j.1551-2916.2010.04049.x
Article
R. Tadi, Yi. Kim, D. Sarkar, Cg. Kim, and Ks. Ryu, "Magnetic and electrical properties of bulk BaTiO3-MgFe2O4 composite", Journal of Magnetism and Magnetic Materials, vol.33, no.5, pp.564-568, Elsevier 2011,
10.1016/j.jmmm.2010.10.012
Article
Chu. M. Cheol, D. Sarkar, and Cho. S. Jai, "Method of Synthesizing Zirconia Nano Powders", Korean Patent, vol.10-1012106 2011
Misc
Chu. M. Cheol, D. Sarkar, and S. J. Cho, "Preparation method for titanium carbide powder and titanium carbide powder prepared thereby", Korean Patent, vol.10-1082040 2011
Misc
D. Sarkar, Min. C. Chu, S. J. Cho, and K., "Barium Titanate Nanoparticles and Method of Preparing the Same", Korean Patent, vol.10, no.0953187 2010
Misc
D. Sarkar, A. Padhiary, Sj. Cho, and Mc. Chu, "Oxidation-Induced Strength Behavior of Ti3SiC2", Journal of Materials Processing Technology, vol.209, no.2, pp.641-646, Elsevier 2009,
10.1016/j.jmatprotec.2008.02.060
Article
D. Sarkar, M. Chu, Sj. Cho, Yi. Kim, and B. Basu, "Synthesis and Morphological Analysis of TiC Nanopowders", Journal of American Ceramic Society, vol.92, no.12, pp.2877-2882, Wiley online library 2009,
10.1111/j.1551-2916.2009.03316.x
Article
D. Sarkar, M. Chu, and S. J. Cho, "Ceramic-Polymer Nanocomposite: Alternate choice of Bone", J Korean Ceramic Society, vol.45, no.6, pp.309-319, Springer 2008,
hdl.handle.net/2080/700
Article
D. Sarkar, . S. Adak, and N. K. Mitra, "Preparation and Characterization of Al2O3-ZrO2 Nanocomposite, Part I: Powder Synthesis and Transformation Behavior During Fracture", Composites Part A: Applied Science and Manufacturing, vol.38, no.1, pp.124-131, Elsevier 2008,
10.1016/j.compositesa.2006.01.005
Article
D. Mohapatra and D. Sarkar, "Effect of in situ spinel seeding on synthesis of MgO-rich MgAl2O4 composite", Journal of Materials Science volume, vol.42, pp.7286–7293, Springer 2007,
10.1007/s10853-007-1546-5
Article
D. Sarkar, . S. Adak, M. C. Chu, S. J. Cho, and N. K. Mitra, "Influence of ZrO2 content and grain size on the thermo-mechanical properties of Nano-ZTA", Ceramics International, vol.33, no.2, pp.255-261, Elsevier 2007,
10.1016/j.ceramint.2005.09.012
Article
D. Sarkar, B. Basu, Min. C. Chu, and S. J. Cho, "Is glass infiltration beneficial to improve Fretting wear Properties for Alumina?", Journal of American Ceramic Society, vol.90, no.2, pp.523-532, Wiley online library 2007,
10.1111/j.1551-2916.2006.01380.x
Article
D. Sarkar, B. Basu, Min. Cheolchu, and S. Jaichoc, "R-Curve Behavior of Ti3SiC2", Ceramics International, vol.33, no.5, pp.789-793, Elsevier 2007,
10.1016/j.ceramint.2006.01.002
Article
D. Sarkar, D. Mohapatra, S. Ray, S. Bhattacharyya, S. Adak, and N. Mitra, "Synthesis and Characterization of Sol–Gel Derived ZrO2 Doped Al2O3 Nanopowder", Ceramics International, vol.33, no.7, pp.1275-1282, Elsevier 2007,
10.1016/j.ceramint.2006.05.002
Article
M., S., D. Sarkar, B. Basu, G., and H., "Oxidation-induced strengthening in ground SiC", Journal of Materials Science, vol.41, pp.4978–4980, Springer 2006,
10.1007/s10853-006-0139-z
Article
D. Sarkar, B., and B. Basu, "Understanding the fretting wear of Ti3SiC2", Journal of the European Ceramic Society olume 26, Issue 13, 2006, Pages, vol.26, no.13, pp.2441-2452, Elsevier 2006,
10.1016/j.jeurceramsoc.2005.05.006
Article
.. T. Venkateswaran, D. Sarkar, and .. B. Basu, "WC–ZrO2 composites: processing and unlubricated tribological properties", Wear, vol.260, no.1, pp.1-9, Elsevier 2006,
doi.org/10.1016/j.wear.2004.11.005
Article
B. Basu, T. Venkateswaran, and D. Sarkar, "Pressureless sintering and tribological properties of WC–ZrO2 composites", Journal of the European Ceramic Society, vol.25, no.9, pp.1603-1610, Elsevier 2005,
10.1016/j.jeurceramsoc.2004.05.021
Article
D. Sarkar, B. Basu, S., M., S., and S., "Tribological Properties of Ti3SiC2", Journal of American Ceramic Society, vol.88, no.11, pp.3245-3248, Wiley online library 2005,
10.1111/j.1551-2916.2005.00569.x
Article
T. Venkateswaran, D. Sarkar, and B. Basu, "Tribological properties of WC-ZrO2Nanocomposites", Journal of American Ceramic Society, vol.88, no.3, pp.691-697, Wiley online library 2005,
10.1111/j.1551-2916.2005.00129.x
Article
D. Sarkar, B., S. J. Ahn, S. Kang, and B. Basu, "Fretting Wear Behavior of Ti(CN)-Based Advanced Cermets", Key Engineering Materials, vol.264-268, pp.1115-1118, Trans Tech Publications 2004,
10.4028/www.scientific.net/KEM.264-268.1115
Article
J. Bera and D. Sarkar, "Formation of BaTiO3 from Barium Oxalate and TiO2", Journal of Electroceramics, vol.11, pp.131–137, Springer 2003,
10.1023/B:JECR.0000026366.17280.0d
Article
D. Sarkar, Ahn. S, K. S, and B. Basu, "Fretting Wear of TiCN-Ni cermet: Influence of secondary carbide content", P/M Science and Technology Briefs, vol.5, no.3, pp.5-10, Elsevier 2003,
hdl.handle.net/2080/409
Article