Mohammed Rajik Khan

Associate Professor

Industrial Design

 (+91) 661 246 2453

 khanmr[at]nitrkl.ac.in

 Biosketch

44

Publications       

3

Sponsored Projects

0

Consultancy Projects

6

Doctoral Students

2

Continuing Education

27

PG Dissertation

 Personal Information

Dr. Mohammed Rajik Khan

Associate Professor

Industrial Design

Joined in Jul 2011

 Room Number: ID-103

 Department of Industrial Design, National Institute of Technology Rourkela, Sundargarh, Odisha, India - 769008

 Education Qualification

  1. Ph.D.
    Mechanical Engineering (Computer-Aided Design)
    PDPM-IIITDM Jabalpur
  2. M.Tech
    Mechanical Engineering
    NIT Kurukshetra
  3. B.E
    Mechanical Engineering
    MITS Gwalior

 Experience

Teaching Experience
  • Product Design, Geometric and Solid Modeling, Rapid Prototyping and Tooling,  NIT Rourkela,  01 Jul 2011 - Till Date
  • Engineering Graphics, Theory of Machines,  Chhattrapati Shivaji Institute of Technology (CSIT), Durg, C.G.,  01 Jul 2006 - 11 Aug 2007
  • Engineering Graphics,  Chhattrapati Shivaji Institute of Technology (CSIT), Durg, C.G.,  09 Nov 2002 - 07 Aug 2004
Post Doctoral Research Experience
  • Development of comfort models to design comfortable handles for hand-held industrial products,  Wolfson School of Mechanical and Manufacturing Engineering, Loughborough University, UK,  31 May 2014 - 23 Jun 2014
Industrial Experience
  • Engineer Incharge, Structural fabrication jobs,  NASA ENGINEERS, Durg, C.G.,  01 Aug 2001 - 31 Oct 2002
Laboratory Development
  • Electromagnetic Welding Laboratory,  NIT Rourkela,  EMW facility of capacity 108 µF, 20kV, 200kA, 20 kHz (Short circuit).
  • Ergonomics & Simulation Laboratory,  NIT Rourkela,  Six-dimensional electromagnetic tracking system (ETS), LIBERTY 240/16-8 System by Polhemus Inc.

 Expertise Information

Research Group
Product Modelling, Design and Analysis , Innovative Product Design, Rapid Product Development and Reverse Engineering
Areas of Interest
Human factors Design , Innovative Product Design , Rehabilitation and Assistive Devices , Occupational Health and Safety , Geometric Modeling for Design, Engineering & Manufacturing, Biomechanical, CAD, etc.

 Projects

Development of customized Sit-to-Stand(S2) trajectory -based mobility assistive devices.

 Science & Engineering Research Board(SERB)

 Principal Investigator

 24 months

 Running

Sponsored

Design and fabrication of a novel scoop stretcher for full body Immobilization during causality transfer

 ICMR

 Principal Investigator

 24 months

 Completed

Sponsored

Electomagnetic welding (EMW) coil design & characterisation from mechanical and metallurgical aspects for tubular jobs of ODS alloy with other materials

 BRNS

 Principal Investigator

 36 months

 Completed

Sponsored

 Continuing Education

Vibration Problems in Rotating Machines: Diagnosis and Rectification (171030L02)

 Industrial Design

 Coordinator

 18 Feb 2019 - 01 Mar 2019

Short-term Course

AUTOMOTIVE DESIGN APPROACHES under GIAN

 Industrial Design

 Coordinator

 04 Dec 2017 - 09 Dec 2017

Short-term Course

 Publications

10

Google Scholar h-index

10

Google Scholar i10-index

8

Scopus h-index

Total Publications: 44
M. R. Khan and T. Ambati, "Musculoskeletal pain symptoms in users performing smartphone texting: A preliminary study on institute environment", International Journal of Industrial Ergonomics, vol.90, pp.103325, Elsevier, July 2022, 10.1016/j.ergon.2022.103325 Article
P. Jain and M. R. Khan, "Comparison of novel stabilisation device with various stabilisation approaches: A finite element based biomechanical analysis", International Journal of Artificial Organs, vol.45, no.5, pp.514–522, SAGE, May 2022, 10.1177/03913988221088334 Article
M. R. Khan, "A study on colour harmony and consumer perception of shampoo packages displayed on screen", Journal of Design Research, Inderscience, January 2022, 10.1504/jdr.2022.10048144 Article
P. Jain and M. R. Khan, "Selection of suitable pedicle screw for degenerated cortical and cancellous bone of human lumbar spine: A finite element study", The International Journal of Artificial Organs, vol.44, no.5, pp.361-366, SAGE, May 2021, 10.1177/0391398820964483 Article
M. R. Khan and G. Naik, "An experimental investigation on postural risks in floor mopping", Design for Tomorrow-Volume 1, Smart Innovation, Systems and Technologies, ch.4, vol.221, pp.39-50, Springer, Singapore, April 2021, 10.1007/978-981-16-0041-8_4 Inbook

Show All Publications(+)

M. R. Khan and G. A. Rahul, "Design and development of an automated hand shovel", Ergonomics for Improved Productivity. Design Science and Innovation, ch.59, pp.525-532, Springer, Singapore 2021, 10.1007/978-981-15-9054-2_59 Inbook
P. Jain, M. Rana, J. K. Biswas, and M. R. Khan, "Biomechanics of Spinal Implants – A Review", Biomedical Physics & Engineering Express, vol.6, no.4, IOP Publishing Ltd, June 2020, 10.1088/2057-1976/ab9dd2 Article
G. Naik and M. R. Khan, "Prevalence of MSDs and postural risk assessment in floor mopping activity through subjective and objective measures", Safety and Health at Work, vol.11, no.1, pp.80-87, Elsevier, March 2020, 10.1016/j.shaw.2019.12.005 Article
P. Jain and M. R. Khan, "Biomechanical study of lumbar spine (L2-L4) using hybrid stabilization device - a finite element analysis", International Journal of Manufacturing, Materials, and Mechanical Engineering, vol.10, no.1, pp.20-32, IGI Global, January 2020, 10.4018/IJMMME.2020010102 Article
D. S. Bisht and M. R. Khan, "Handle design of woodworking tools: Preferences and recommendations of craftsmen and design students", International Journal of Advanced Production and Industrial Engineering, vol.5, no.2, pp.40-47 2020, 10.35121/ijapie202004245 Article
D. S. Bisht and M. R. Khan, "TWHP (TYPE-WHAT-HOW-POSE): A Novel Nomenclature for Hand Anthropometry", Intelligent Techniques and Applications in Science and Technology, ch.76, vol.12, pp.650-658, Springer, part of the" learning and analytics in intelligent systems" book 2020, 10.1007/978-3-030-42363-6_76 Inbook
S. Kumar, M. R. Khan, P. Saroj, G., and A. Sharma, "Experimental investigation of driver material on electromagnetic welding of alloy D9 SS tube to SS316L(N) plug", International Journal of Advanced Manufacturing Technology, vol.105, no.10, pp.4225–4235, Springer, November 2019, 10.1007/s00170-019-04525-0 Article
M. R. Khan and S. A. Anil, "Prediction of impact response in construction safety helmet using FEA", Journal of Engineering, Design and Technology, Emerald, October 2019, 10.1108/JEDT-05-2019-0120 Article
P. Jain and M. R. Khan, "Prediction of biomechanical behaviour of lumbar vertebrae using a novel semi-rigid stabilization device", Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol.233, no.8, pp.849-857, Sage, June 2019, 10.1177/0954411919856497 Article
D. S. Bisht and M. R. Khan, "A novel anatomical woodworking chisel handle", Applied Ergonomics, vol.76, pp.38-47, Elsevier, April 2019, 10.1016/j.apergo.2018.11.010 Article
M. R. Khan, N. K. Singh, and S. D. Baliram, "An Ergonomic Study: Bicycle Repairer in Rural India", Research into Design for a Connected World, Smart Innovation, Systems and Technologies, ch.43, vol.02, pp.509-517, Springer, smart innovation, systems and technologies (sist, volume 135, January 2019, 10.1007/978-981-13-5977-4_43 Inbook
M. R. Khan, S. Mishra, and S. P. Yadav, "Number Maze: Play and Learn", Research into Design for a Connected World, ch.60, vol.2, pp.713-721, Springer, smart innovation, systems and technologies book (sist, volume 135), January 2019, 10.1007/978-981-13-5977-4_60 Inbook
D. S. Bisht and M. R. Khan, "Identification and Classification of Parameters for Woodworking Chisel Design", in Proceedings: 17th International Conference on Humanizing Work and Work Environment, HWWE-2019 2019 Inproceedings
S. D. Baliram, K. P. Vaikunthbhai, K. Mehar, M. R. Khan, S. K. Panda, and H. K. Pandey, "Experimental training of shape memory alloy fibres under combined thermomechanical loading", Structural Engineering and Mechanics, vol.68, no.5, pp.519-526, Techno Press, December 2018, 10.12989/sem.2018.68.5.519 Article
S. D. Baliram, P. V. Katariya, K. Mehar, M. R. Khan, S. K. Panda, and H. K. Pandey, "Experimental training of shape memory alloy fibres under combined thermomechanical loading", Structural Engineering Mechanics, vol.68, no.5, pp.519-526, Korea Institute of Science and Technology Information, December 2018, 10.12989/sem.2018.68.5.519 Article
M. R. Khan, Md. M. Hossain, A. Sharma, and S. Kumar, "Sequential coupling of electromagnetic–structural simulation for compression welding of tubular jobs", Journal of Mechanical Engineering Science, Sage, November 2018, 10.1177/0954406218813445 Article
M. R. Khan and N. K. Singh, "Prevalence of musculoskeletal disorders among Indian railway sahayaks", International Journal of Occupational and Environmental Health, vol.24, no.1-2, pp.27-37, Taylor & Francis, August 2018, 10.1080/10773525.2018.1507187 Article
M. R. Khan, Md. M. Hossain, A. Sharma, and S. Kumar, "Predicting the effect of field shaper in electromagnetic welding using FEM", Arabian Journal for Science and Engineering, vol.44, no.2, pp.1-8, Springer, July 2018, 10.1007/s13369-018-3430-9 Article
M. Allaparthi, M. R. Khan, and T. B. Teja, "Three-dimensional finite element dynamic analysis for micro-drilling of multi-layered printed circuit board", Materials Today: Proceedings, vol.5, no.2, pp.7019-7028, Elsevier, April 2018, 10.1016/j.matpr.2017.11.365 Article
A. Sharma, M. R. Khan, A. Raj, Md. M. Hossain, and S. Kumar, "Distribution of electromagnetic field and pressure of single-turn circular coil for magnetic pulse welding using FEM", Strengthening and Joining by Plastic Deformation, ch.09, pp.201–215, Springer, lecture notes on multidisciplinary industrial engineering, Singapore 2018, 10.1007/978-981-13-0378-4_9 Inbook
M. R. Khan and G. A. Rahul, "Design and development of an automated hand shovel", in 15th International Conference on Humanizing Work and Work Environment (HWWE 2017) Theme: Ergonomics for Improved Productivity, Springer, December 2017 Inproceedings
D. S. Bisht and M. R. Khan, "Anatomically shaped tool handles designed for power grip", in 6th International Conference on Research into Design (ICoRD 2017), vol.1, pp.135-148, Springer, smart innovation, systems and technologies, IIT Guwahati, Assam, January 2017, 10.1007/978-981-10-3518-0 Inproceedings
M. R. Khan, B. Patnaik, and S. Patel, "Design and development of a novel sit-to-stand and mobility assistive device for ambulation and elderly", in 6th International Conference on Research into Design (ICoRD’17), vol.1, pp.801-811, Springer, smart innovation, systems and technologies, 65, IIT Guwahati, Assam, January 2017, 10.1007/978-981-10-3518-0_69 Inproceedings
P. Jain and M. R. Khan, "Biomechanical study of fused lumbar spine considering bone degeneracy using FEA", Arabian Journal for Science and Engineering, pp.1-10, Springer 2017, 10.1007/s13369-017-2848-9 Article
M. R. Khan, A. Raj, Md. M. Hossain, S. Kumar, and A. Sharma, "Distribution of electromagnetic field and pressure of single turn circular coil for magnetic pulse welding using FEM", in Proceedings of the 6th International and 27th All India Manufacturing Technology, Design & Research Conference, pp.126-130, College of Engineering, Pune, Maharashtra, INDIA, 6th international & 27th all india manufacturing technology, design and research conference (aimtdr), College of Engineering, Pune, Maharashtra, INDIA, December 2016 Inproceedings
M. Allaparthi, M. R. Khan, and A. S. Narayana, "FE modal and harmonic analysis of Micro Drill with ultrasonic horn", in Materials Design and Applications, Springer, advanced structured materials 65, Porto, Portugal, November 2016, 10.1007/978-3-319-50784-2_21 Inproceedings
M. R. Khan, P. K. Purohit, and S. Ghadai, "Development of a Continuous Passive Motion (CPM) rehabilitation device adopting human knee gait pattern", in Proceedings of the International Conference on Computer Aided Engineering, pp.370-375, GITAM University, Department of Mechanical Engineering, GITAM University, School of Technology, Hyderabad, India, December 2015 Inproceedings
M. R. Khan, P. Giri, and P. P. Kumar, "Redesign and ergonomic analysis of scoop stretcher for full body immobilization during casualties", in ICoRD’15 – Research into Design Across Boundaries, vol.1, pp.411-420, Springer India, smart innovation, systems and technologies, vol. 34, Indian Institute of Science, Bangalore, India 2015, 10.1007/978-81-322-2232-3_36 Inproceedings
M. Allaparthi and M. R. Khan, "Recent advances in burr height minimization in micro-machining", in Proceedings of the 5th International and 26th All India Manufacturing Technology, Design and Research Conference, vol.1, pp.386 (1-6), IIT Guwahati, Assam, India, IIT Guwahati, Guwahati, India, December 2014 Inproceedings
M. R. Khan and P. Tandon, "Parameterized geometric design of a generic form milling cutter", Computer-Aided Design and Applications, vol.10, no.5, pp.757-765, Taylor & Francis, August 2013, 10.3722/cadaps.2013.757-765 Article
M. R. Khan and P. Tandon, "Development of the geometry and its redesigning for a special shaped milling cutter", in Proceedings of the World Congress on Engineering, vol.1, pp.526-531, Newswood, July 2013 Inproceedings
D. S. Bisht and M. R. Khan, "Ergonomic assessment methods for the evaluation of hand held industrial products: A review", in Proceedings of the World Congress on Engineering, vol.1, pp.559-564, Newswood, July 2013 Inproceedings
M. R. Khan and P. Tandon, "Mathematical modeling of a generic multi-profile form milling cutter", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol.227, no.5, pp.1036-1046, Sage, May 2013, 10.1177/0954406212455890 Article
P. Parida, B. B. Biswal, and M. R. Khan, "Kinematic modeling and analysis of a multifingered robotic hand", Advanced Materials Research, vol.383-390, pp.6684-6688, Trans Tech Publications, November 2011, 10.4028/www.scientific.net/AMR.383-390.6684 Article
M. R. Khan and P. Tandon, "Mathematical modeling for the design of a generic custom-engineered form mill", The International Journal of Advanced Manufacturing Technology, vol.54, no.1, pp.139–148, Springer, April 2011, 10.1007/s00170-010-2936-4 Article
M. R. Khan and P. Tandon, "Computer-Aided Design and Analysis of a Custom-Engineered Form Milling Cutter", Computer-Aided Design and Applications, vol.7, no.2, pp.213-219, Taylor & Francis 2010, 10.3722/cadaps.2010.213-219 Article
M. R. Khan and P. Tandon, "Design of a novel multi-radius form milling cutter", in 3rd International and 24th All India Manufacturing Technology, Design and Research Conference – AIMTDR, vol.1, pp.465-470, Andhra University, 3rd international & 24th all india manufacturing technology, design & research conference, Andhra University, Visakhapatnam 2010 Inproceedings
P. Tandon and M. R. Khan, "Three dimensional modeling and finite element simulation of a generic end mill", Computer-Aided Design, vol.41, no.2, pp.106-114, Elsevier 2009, 10.1016/j.cad.2009.01.005 Article
M. R. Khan and P. Tandon, "Geometric modeling and analysis of three dimensional generic end mill cutter", in Competitive Manufacturing, vol.2, pp.1029-1034, IITMadras, proceedings of the 2nd international and 23rd all india manufacturing technology, design & research, IITMadras 2008 Inproceedings

 Courses Taught

  • ID201 : Fundamental of Computer Graphics and Solid Modeling {Theory}
  • ID220 : Fundamentals of Computer Graphics and Solid Modelig {Theory}
  • ID222 : Geometric and Solid Modeling {Theory}
  • ID311 : Geometric and Solid Modeling {Theory}
  • ID311 : Product Design - I {Theory}
  • ID312 : Material Selection for Design {Theory}
  • ID312 : Product Design - II {Theory}
  • ID3204 : Product Design {Theory}
  • ID411 : Product Design {Theory}
  • ID412 : Design Management {Theory}
  • ID4304 : Rapid Product Development Technologies {Theory}
  • ID431 : Rapid Product Development Technologies {Theory}
  • ID432 : Rapid Product Development Technologies {Theory}
  • ID442 : Rapid Product Development Technologies {Theory}
  • ID6101 : Design Introduction {Theory}
  • ID611 : Advanced Product Design and Development {Theory}
  • ID6331 : Advanced Product Design and Development {Theory}
  • ID6340 : Rapid Prototyping and Tooling {Theory}
  • ID639 : Applied Ergonomics {Theory}
  • ID665 : Rapid Prototyping and Tooling {Theory}
  • ID271 : Design Workshop - I {Practical}
  • ID272 : Design Workshop - I {Practical}
  • ID367 : Product Development Laboratory – I {Practical}
  • ID368 : Product Development Laboratory – II {Practical}
  • ID3704 : Product Design and Development Laboratory {Practical}
  • ID372 : Design Workshop - II {Practical}
  • ID373 : Design Workshop – III {Practical}
  • ID3801 : Industrial Design Project- I {Practical}
  • ID3802 : Industrial Design Project- II {Practical}
  • ID382 : Industrial Design Project – II {Practical}
  • ID4701 : Design Workshop - IV {Practical}
  • ID4704 : Reverse Engineering and Rapid Manufacturing Laboratory {Practical}
  • ID473 : Product Design Laboratory {Practical}
  • ID476 : Reverse Engineering and Rapid Manufacturing Laboratory {Practical}
  • ID6173 : Design Practice {Practical}
  • ID671 : Design Practice - 1 {Practical}
  • ID671 : Design Practice– I {Practical}
  • ID690 : Research Practice {Practical}
  • ID772 : Rapid Manufacturing Laboratory {Practical}
  • ID776 : Design Workshop {Practical}
  • ID789 : Product Development Laboratory {Practical}
  • ID792 : Software Laboratory – II {Practical}
  • WS373 : Advanced Machining Practice {Practical}

 Research Scholars

Ph.D. Students [6]
Conceptual Design Approach For Woodworking Chisel Handle

 Dhananjay Singh Bisht

Enrolled: Jan 2012

 Graduated : Feb 2019

 Supervisor

Three-Dimensional Finite Element Analysis Of Conventional And Ultrasonic Vibration Assisted Micro-Drilling On Pcb

 Muddu Allaparthi

Enrolled: Jul 2013

 Graduated : Dec 2018

 Supervisor

Design And Fe Analysis Of Novel Semi - Rigid Stabilization Device For Human Lumbar Spine

 Pushpdant Jain

Enrolled: Jan 2015

 Graduated : Mar 2020

 Supervisor

Design Interventions In Tasks Pertaining To Awkward Cervical Posture.

 Kumar Harshwerdhan

Enrolled: Aug 2021

 Continuing

 Supervisor

Design Interventions In Sit-To-Stand Tasks

 Dipanjan Dey

Enrolled: Sep 2021

 Continuing

 Supervisor

Design Interventions In Kinematic And Postural Changes In Sts Transition Of Elderly

 Mishikari Nizamoddin

Enrolled: Mar 2022

 Continuing

 Supervisor

M.Tech by Research Students [1]
Investigation On Electromagnetic Welding (Emw) For Tubular Jobs Using Fea

 Md Mosarraf Hossain

 Graduated  (2018)

 Supervisor

 Dissertations

PG Dissertation
  • Bhavesh Koustubh (213ID1363), "SUBJECTIVE ASSESMENT TO DETERMINE AN IMPROVED HAND ARM POSTURE OF OPERATOR DURING HAND DRILLING" - M.Tech.    Supervisor     2014-15 Spring
  • Gauresh Ravindra Khanolkar (213ID1362), "Simulation of Magnetic Pulse Welding with varying Air Gap in Tubular Jobs using FEM" - M.Tech.    Supervisor     2014-15 Spring
  • Rishikant Sahani (213ID1369), "FINITE ELEMENT ANALYSIS OF HUMAN LUMBAR VERTEBRAE IN PEDICLE SCREW FIXATION" - M.Tech.    Supervisor     2014-15 Spring
  • Addepalli Syam Narayana (214ID1392), "Design and Analysis of Ultrasonic Horn for Micro Drilling" - M.Tech.    Supervisor     2015-16 Spring
  • Alok Raj (214ID1393), "FE Simulation of Electromagnetic Welding for Tubular Jobs" - M.Tech.    Supervisor     2015-16 Spring
  • Tanelanka Brahma Teja (214ID1347), "Dynamic Analysis on Ultrasonic Vibration Assisted Micro-Drilling of Multi layered Materials using Abaqus Explicit" - M.Tech.    Supervisor     2015-16 Spring
  • Aditya Gupta (215ID1176), "Design & Fabrication of a Novel Continuous Passive Motion (CPM) Device for Gait Rehabilitation" - M.Tech.    Supervisor     2016-17 Spring
  • Narendra Kumar (215ID1395), "Numerical Simulation for Ultrasonic Vibration Assisted Drilling of Al6061-T6" - M.Tech.    Supervisor     2016-17 Spring
  • Abhilash P (216ID1339), "Finite Element Simulation of a Bitter Coil for Electromagnetic Compression Welding" - M.Tech.    Supervisor     2017-18 Spring
  • Nishant Kumar Singh (216ID1343), "Development of a Biofidelic Finite Element Model of Human Lumbar Spine" - M.Tech.    Supervisor     2017-18 Spring
  • Shinde Digamber Baliram (216ID1331), "Thermomechanical Analysis of Shape Memory Alloy Fiber: An Experimental Approach" - M.Tech.    Supervisor     2017-18 Spring
  • Sonawane Atul Anil (216ID1332), "Impact Analysis of Construction Helmet with Ventilation Slots" - M.Tech.    Supervisor     2017-18 Spring
  • A Pavani Achuta Kumari (217ID1445), "Prevalence of Musculoskeletal Disorders and Ergonomic Risk Factors among University Professors" - M.Tech.    Supervisor     2018-19 Spring
  • Gouri Naik (217ID1350), "Postural Comfort and Ergonomics Risk Assessment during Floor Mopping" - M.Tech.    Supervisor     2018-19 Spring
  • Sagar Kumar Behera (217ID1349), "Subjective Assessment of Floor Mopping Professionals" - M.Tech.    Supervisor     2018-19 Spring
  • Jyoti Verma (218ID1191), "Assessment of comfortable handle position in push movement task using RULA" - M.Tech.    Supervisor     2019-20 Spring
  • Shivam Shrivastava (218ID1190), "Conceptual Design and Virtual Ergonomic Analysis of Material Handling Device" - M.Tech.    Supervisor     2019-20 Spring
  • Chitralekha Patidar (219ID1554), "Assessment of postural and muscle strain in lower extremity among individuals during transition from floor sitting to walk." - M.Tech.    Supervisor     2020-21 Spring
  • Kalapad Rahul Samadhan (219ID1556), "Effect of dynamic knee support in a cane on lower extremity muscles of healthy individuals during the sit-to-stand transition" - M.Tech.    Supervisor     2020-21 Spring
  • More Neha Hanuman (219ID1588), "Effect of adjustable handle inclinations in a cane convertible to walking pole on hand-arm-shoulder muscles of healthy individuals during the sit-to-stand transition" - M.Tech.    Supervisor     2020-21 Spring
  • Rajashekar Aloori (218ID1180), "Enhancing the Life of the Diaphragm in a Three-Way Water Valve" - M.Tech.    Supervisor     2020-21 Spring
  • Tejaswi Ambati (219ID1551), "Ergonomic risk assessment on university students during mobile texting" - M.Tech.    Supervisor     2020-21 Spring
  • Tushar Tiwari (219ID1075), "Simulation of Magnetic Field and Force with Varying Shapes of an Electromagnetic Forming Coil having Different Core Materials using FEA" - M.Tech.    Supervisor     2020-21 Spring
  • kotakala Saipraveen (220ID1618), "Design and Finite element analysis of clamping device" - M.Tech.    Supervisor     2021-22 Spring
  • Saurabh Yadav (220ID1372), "User Centered Approach to Design a Smart Helmet Application" - M.Tech.    Supervisor     2021-22 Spring
  • Sumit Pravin Vedpathak (220ID1625), "Ergonomic evaluation of handle positions on human posture in hand cart pushing" - M.Tech.    Supervisor     2021-22 Spring
  • Taywade Shantanu Prakashrao (220ID1624), "Design and Analysis of Sit to Stand Walker" - M.Tech.    Supervisor     2021-22 Spring
UG Dissertation
  • Abhinav Kumar (111ID0470), "Re-Design of Motor-Bike Seat using Three Dimensional Reverse Engineering" - B.Tech.    Supervisor     2014-15 Spring
  • Anubhav Gupta (111ID0468), "Re-Design of Motor-Bike Seat using Three Dimensional Reverse Engineering" - B.Tech.    Supervisor     2014-15 Spring
  • Ayushi Khetan (111ID0469), "Design of an Ergonomic Knife Handle" - B.Tech.    Supervisor     2014-15 Spring
  • K Vinod Kumar (111ID0392), "STUDY AND DESIGN OF AUTOMOBILE CONTINUOUSLY VARIABLE TRANSMISSION" - B.Tech.    Supervisor     2014-15 Spring
  • Kushal Goel (111ID0514), "Design of Smart Furniture for a Smart City" - B.Tech.    Supervisor     2014-15 Spring
  • Palarapu Pavan Kumar (111ID0471), "Fragrance Perception through Perfume Packaging: A Visual Link with Customers" - B.Tech.    Supervisor     2014-15 Spring
  • Pranit Kumar Purohit (111ID0025), "Design and Development of a Continuous Passive Motion Device for Physiotherapeutic Treatment of Human Knee" - B.Tech.    Supervisor     2014-15 Spring
  • Preeti Giri (111ID0098), "Fragrance Perception through Perfume Packaging: A Visual Link with Customers" - B.Tech.    Supervisor     2014-15 Spring
  • Sambit Ghadai (111ID0006), "Design and Development of a Continuous Passive Motion Device for Physiotherapeutic Treatment of Human Knee" - B.Tech.    Supervisor     2014-15 Spring
  • Sovan Suman Dhal (111ID0270), "Design of Internal Mechanism for Adjustable Computer Mouse operated using Single Control Input" - B.Tech.    Supervisor     2014-15 Spring
  • Swaroop Panda (111ID0422), "Design of Smart Furniture for a Smart City" - B.Tech.    Supervisor     2014-15 Spring
  • Amit Kumar Nayak (112ID0308), "Design and Development of an Automobile Clutch Pedal Extender" - B.Tech.    Supervisor     2015-16 Spring
  • Biswaksen Patnaik (112ID0312), "Design and Ergonomic Analysis of Automated Sit-to-Stand cum Mobility Assistive Device" - B.Tech.    Supervisor     2015-16 Spring
  • Sharvani Supreiya (112ID0515), "Design and Development of Sensor Based Walking Assistive Device for Blind and Visually Impaired" - B.Tech.    Supervisor     2015-16 Spring
  • Sonalisa Patel (112ID0011), "Design and Ergonomic Analysis of Automated Sit-to-Stand cum Mobility Assistive Device" - B.Tech.    Supervisor     2015-16 Spring
  • Surajit Barad (112ID0106), "Self-Balancing Flying Copter" - B.Tech.    Supervisor     2015-16 Spring
  • Arvind Shroff (113ID0338), "Design and Analysis of Bael Processing Machine" - B.Tech.    Supervisor     2016-17 Spring
  • Debraj Tudu (113ID0339), "Development of a sensor based system for validation of Motion Stereotypes" - B.Tech.    Supervisor     2016-17 Spring
  • S Prathik Yadav (113ID0340), "Number Maze: Play and Learn." - B.Tech.    Supervisor     2016-17 Spring
  • Suman Mishra (113ID0331), "Number maze: Play and Learn" - B.Tech.    Supervisor     2016-17 Spring
  • Aditya Kansal (114ID0203), "Impact of specific physical design characteristics on the aesthetic preference of centre tables" - B.Tech.    Supervisor     2017-18 Spring
  • Gupta Aditya Rahul (114ID0461), "Design and Fabrication of Modified Scoop Stretcher" - B.Tech.    Supervisor     2017-18 Spring
  • Kakarla Laxmi Jyothi (114ID0639), "REDESIGN OF BABY CARRIER FOR MORE DURABILITY AND COMFORT" - B.Tech.    Co-supervisor     2017-18 Spring
  • Partha Sarathi Minz (114ID0204), "Development of Upper Body Passive Exoskeleton" - B.Tech.    Supervisor     2017-18 Spring
  • Pratik Padhi (114ID0206), "Design of Stray Leaves Collecting Device" - B.Tech.    Supervisor     2017-18 Spring
  • Akasapu Hemanthika (115ID0383), "Effect of Colour on Colour Harmony and Consumer Expectations of Shampoo Bottle Package Design" - B.Tech.    Supervisor     2018-19 Spring
  • Maddireddy Tejaswini (115ID0650), "Effect of Colour on Colour Harmony and Consumer Expectations of Shampoo Bottle Package Design" - B.Tech.    Supervisor     2018-19 Spring
  • Mehul Surendra Gaidhani (115ID0068), "Effect of Fruit Juice Packaging on Consumer Behaviour" - B.Tech.    Supervisor     2018-19 Spring
  • S Amarjyoti (115ID0571), "A Novel Design of a Multipurpose Manual Load/Luggage Carrier" - B.Tech.    Supervisor     2018-19 Spring
  • Vivek Mohanty (115ID0390), "Concept Design of an Ergonomic Screwdriver Handle" - B.Tech.    Supervisor     2018-19 Spring
  • Abinash Mishra (115ID0388), "Conceptual Design of a Compact Three Wheeler Electric Vehicle for Mobile Food Vendors" - B.Tech.    Supervisor     2019 Summer
  • Ashu Patel (116ID0416), "Rubik Cube Solver bot" - B.Tech.    Supervisor     2019-20 Spring
  • Mrinal Chaudhury (116ID0404), "Positive Design of Seating Furniture for Outpatient Healthcare Waiting Environments" - B.Tech.    Supervisor     2019-20 Spring
  • Polaki Sunayana (116ID0403), "Design and FE Analysis of a Claw Shaped Shovel Blade" - B.Tech.    Supervisor     2019-20 Spring
  • Safalya Kumar Parida (116ID0415), "Redesign of an Educational Sign Language Application." - B.Tech.    Supervisor     2019-20 Spring
  • Manisha Jena (117ID0161), "Creating A Free Legal Aid Platform for Everyone" - B.Tech.    Supervisor     2020-21 Spring
  • Manisha Jena (117ID0161), "Creating A Free Legal Platform for Everyone" - B.Tech.    Supervisor     2020-21 Spring
  • Raj Rajeswar Sahu (117ID0772), "Creating A Free Legal Aid Platform for Everyone" - B.Tech.    Supervisor     2020-21 Spring
  • Raj Rajeswar Sahu (117ID0772), "Creating A Free Legal Platform for Everyone" - B.Tech.    Supervisor     2020-21 Spring
  • Saswat Pani (115ID0393), "FABRICATION OF A MULTIPURPOSE ERGONOMIC BACKPACK" - B.Tech.    Co-supervisor     2020-21 Spring
  • Shreelekha Panda (117ID0492), "A UI/UX Approach to digitize and standardize hiring of part-timers" - B.Tech.    Supervisor     2020-21 Spring
  • Sonali Sahoo (117ID0497), "UX/UI Design for Food Donation: A Sustainable System for Charity and Waste Reduction" - B.Tech.    Supervisor     2020-21 Spring
  • T Prithvi Kiran (117ID0488), "UX/UI Design for Food Donation: A Sustainable System for Charity and Waste Reduction" - B.Tech.    Supervisor     2020-21 Spring
  • Yugandhar Sanapala (117ID0773), "DESIGNING AN INTERFACE TO MANAGE NIT HEALTH CENTRE" - B.Tech.    Supervisor     2020-21 Spring
  • Saswat Pani (115ID0393), "PRELIMINARY IDEA FOR THE FABRICATION OF A MULTIPURPOSE ERGONOMIC BACKPACK" - B.Tech.    Co-supervisor     2021 Summer
  • Yugandhar Sanapala (117ID0773), "DESIGNING AN INTERFACE TO MANAGE NIT HEALTH CENTRE" - B.Tech.    Supervisor     2021 Summer
  • Ankit Kumar Samota (118ID0781), "Florence: An electronic medical records management system" - B.Tech.    Supervisor     2021-22 Spring
  • Dosala Divij (118ID0405), "Breaking Bread: Memu and payments app for a bakery" - B.Tech.    Supervisor     2021-22 Spring
  • Ekta Sharma (118ID0417), "Concept Design of UX Resources App" - B.Tech.    Supervisor     2021-22 Spring
  • Prithvi Raj Naik (118ID0412), "Indian theme lineal and 2D flat illustration library." - B.Tech.    Supervisor     2021-22 Spring
  • Smithraj Karna (118ID0726), "Florence: An electronic medical records management system" - B.Tech.    Supervisor     2021-22 Spring

 Awards and Honours

Awards and Honours
  • As a PhD Supervisor, One of the Research Scholar has stood 1st for best research work and presentation in Research Scholar Week (2017-18) on “ ” at NIT Rourkela (PG Student: Pushpdant jain),    2018
  • Received best technical paper award for the research paper “Three-Dimensional Finite element dynamic analysis for micro drilling of multi-layer printed circuit board material” presented in International Conference on Emerging Trends in Materials & Manufacturing Engineering (iMME17), NIT Tiruchirappalli, TN, India, March 10- 12, 2017.,    2018
  • Received merit award for most distinguish paper for the research paper “Anatomically shaped tool handles designed for power grip” presented in 6th International Conference on Research into Design (ICoRD’17) at Indian Institute of Technology Guwahati, Assam, January 09-11, 2017.,    2018
  • Received a gift voucher of EUR 150 as a felicitation for winning the distinguish paper award at 6th International Conference on Research into Design (ICoRD’17) 09th -11th January 2017 at Indian Institute of Technology Guwahati.,    2018
  • As a Project Supervisor, one of the B.Tech. project has received Gold medal for best B.Tech. project (2015-16) for developing “Automated Sit-To-Stand cum mobility assistive device” at NIT Rourkela (UG Student: Sonalisa Patel),    2018
  • As a Project Supervisor, one of the M.Tech. project has received Gold medal for best Postgraduate (M.Tech. and Dual Degree) project (2016-17) on “Design & Fabrication of a Novel Continuous Passive Motion (CPM) Device for Gait Rehabilitation” at NIT Rourkela (PG Student: Aditya Gupta),    2017
  • As a Project Supervisor, one of the M.Tech. project has received Shanta Jain Award-2016 for the best Product Oriented project (2016-17) on “Design & Fabrication of a Novel Continuous Passive Motion (CPM) Device for Gait Rehabilitation” at NIT Rourkela (PG Student: Aditya Gupta),    2017
  • Won best paper award in undergraduate category with 1st prize of $200 gift voucher for the research paper “Design and development of an automated hand shovel” presented in 15th International Conference on Humanizing Work and Work Environment (HWWE 2017) Theme: Ergonomics for Improved Productivity, Aligarh Muslim University, Aligarh, India, December, 8-10, 2017 (UG Student: Aditya Rahul Gupta).,    2017
  • Awarded Design & Manufacturing Proficiency prize for the best thesis in Mechanical Engineering Discipline in the Graduating class of Doctoral Programme (Ph.D.), 2012, IIITDM Jabalpur, India.,    2012
  • Received financial grant under International Travel Support Scheme from Department of Science and Technology (DST), SERC Division, Govt. of India, New Delhi under Young Scientist category for attending and presenting paper at International CAD conference and Exhibition - CAD'10, Dubai, UAE, June 21-25, 2010.,    2010
  • One of my Research paper “Three dimensional modeling and finite element simulation of a generic end mill”, Computer-Aided Design, 2009, Vol. 41, No. 2, pp. 106-114, has been mentioned 4th position under Science Direct, hottest 25 articles, Computer Science, Computer-Aided Design, January to March 2009. (http://top25.sciencedirect.com/subject/engineering/12/journal/computeraided-design/00104485/archive/21/),    2009
Memberships / Fellowships
  • Member, Life time, International Association of Engineers (IAENG) Society of Mechanical Engineering and Industrial Engineering,    2013