masantam

Academic Identity

Orcid Id

0000-0003-2057-0070

Scopus Id

24339056600

Researcher Id

Google Scholar Id

26kJyK8AAAAJ

Manoj Masanta

Assistant Professor Grade-I

Mechanical Engineering

(+91) 661 246 2530

masantam[at]nitrkl.ac.in

Biosketch

67

Publications

2

0

Consultancy Projects

7

Doctoral Students

2

Continuing Education

28

PG Dissertation

Personal Information

Prof. Manoj Masanta

Assistant Professor Grade-I

Mechanical Engineering

Joined in Jul 2011

Room Number:

Department of Mechanical Engineering, National Institute of Technology Rourkela, Sundargarh, Odisha, India - 769008

Education Qualification

2010 Ph.D.
Mechanical Engineering
IIT Kharagpur
2006 M.E
Production Engineering
Jadavpur University
2004 B.E
Production Engineering
Jadavpur University

Experience

Teaching Experience

Production Engineering, NIT Rourkela, 25 Jul 2011 - Present

Expertise Information

Research Group

Manufacturing Science: [Production Engineering Division]

Areas of Interest

Surface Engineering and Coating Technology , Advance welding processes , Non conventional manufacturing , TIG cladding , Tribology of composite coating , Laser application in manufacturing

Projects

FABRICATION OF TI-TIC METAL MATERIX COMPOSITE FROM WASTE TICHIPS

CSIR

Co-Investigator

36 months

Completed

Continuing Education

Laser Based Manufacturing for Future Industrial Development

Mechanical Engineering

Coordinator

21 Jul 2023 - 25 Jul 2023

Brochure

Short-term Course

Artificial Intelligence Techniques for Analysis and Control of Mechanical and Aerospace systems

Mechanical Engineering

Coordinator

25 Sep 2023 - 29 Sep 2023

Brochure

Workshop

Publications

15

Google Scholar h-index

22

Google Scholar i10-index

14

Scopus h-index

Total Publications: 67

M. K. Debta and M. Masanta, "Effect of nano-Y2O3 on the microstructure and wear behaviour of TIG cladded TiC-Co-nY2O3 coating", International Journal of Refractory Metals and Hard Materials, vol.111, no.106078, Elsevier, February 2023, 10.1016/j.ijrmhm.2022.106078 Article

K. Kumar, C. Kumar, M. Masanta, and S. Pradhan, "A review on TIG welding technology variants and its effect on weld geometry", Materials Today: Proceedings, vol.50, no.5, pp.999-1004, Elsevier 2022, 10.1016/j.matpr.2021.07.308 Article

M. K. Debta and M. Masanta, "Effect of stand-off-distance on the performance of TIG cladded TiC-Co coating deposited on Ti-6Al-4V alloy", Surface and Coatings Technology, vol.434, pp.128210, Elsevier 2022, 10.1016/j.surfcoat.2022.128210 Article

N. K. Gupta, P. K. Raj, M. K. Debta, and M. Masanta, "Performance evaluation of TIG cladded in-situ TiC-TiB2 composite coating fabricated on AISI304 stainless steel", Materials Today: Proceedings, vol.62, no.10, pp.5956-5961, Elsevier 2022, 10.1016/j.matpr.2022.04.687 Article

C. K. Sahoo, S. Mallick, K. Kumar, and M. Masanta, "Pulse laser welding of high carbon alloy steel: assessment of melt pool geometry and mechanical performance", Sadhana, vol.46, no.13, pp.1-8, Indian Academy of Sciences 2021, 10.1007/s12046-020-01528-6 Article

Show All Publications(+)

A. Sahu, A. R. E, M. Masanta, and C. K. Sahoo, "On the constancy in wear characteristic of large area TiC–Ni coating developed by overlapping of TIG arc scanning", Tribology International, vol.151, Elsevier, November 2020, 10.1016/j.triboint.2020.106501 Article

T. D, S. Kumari, and M. Masanta, "Deposition of TiC-Cu composite coating on AISI 304 stainless steel by EDC process using powder compact tool electrode", Indian Journal of Engineering and Materials Sciences, vol.27, pp.623-630, NISCAIR, June 2020 Article

C. K. Padhee, M. Masanta, and A. K. Mondal, "Feasibility of Al-TiC coating on AZ91 magnesium alloy by TIG alloying method for tribological application", Transactions of Nonferrous Metals Society of China, vol.30, no.6, pp.1550-1559, Elsevier, June 2020, 10.1016/S1003-6326(20)65318-3 Article

R. Prasad, D. T. Waghmare, K. Kumar, and M. Masanta, "Effect of overlapping condition on large area NiTi layer deposited on Ti-6Al-4V alloy by TIG cladding technique", Surface and Coatings Technology, vol.385, Elsevier, March 2020, 10.1016/j.surfcoat.2020.125417 Article

P. J. Teja, S. R. Shial, D. Chaira, and M. Masanta, "Development and characterization of Ti-TiC composites by powder metallurgy route using recycled machined Ti chips", Materials Today: Proceedings, vol.26, no.part 2, pp.3292-3296, Elsevier 2020, 10.1016/j.matpr.2020.02.467 Article

S. K. C, R. Pokhrel, A. K. Mondal, and M. Masanta, "Effect of temperature and applied load on sliding wear behaviour of AZ91D magnesium alloy", Materials Today: Proceedings, vol.26, no.part 2, pp.1136-1139, Elsevier 2020, 10.1016/j.matpr.2020.02.227 Article

M. K. Debta, R. Mishra, and M. Masanta, "Experimental investigation on the machining performance of AZ91D (90% Mg) alloy by wire-cut EDM", Materials Today: Proceedings, vol.33, no.8, pp.5557-5560, Elsevier 2020, 10.1016/j.matpr.2020.03.540 Article

S. Saroj, A. Sahu, and M. Masanta, "Geometrical assessment and mechanical characterization of single-line Inconel 825 layer fabricated on AISI 304 steel by TIG cladding method", Surfaces and Interfaces, vol.20, pp.100631, Elsevier 2020, 10.1016/j.surfin.2020.100631 Article

J. Thrinadh, A. Mohapatra, S. Datta, and M. Masanta, "Machining Behavior of Inconel 718 Superalloy: Effects of Cutting Speed and Depth of Cut", Materials Today: Proceedings, vol.26, no.part 2, pp.200-208, Elsevier 2020, 10.1016/j.matpr.2019.10.128 Article

J. Thrinadh, S. K. Sahu, S. Datta, and M. Masanta, "Powder Mixed Electro-Discharge Machining Performance of Inconel 718: Effect of Concentration of Multi-Walled Carbon Nanotube Added to the Dielectric Media", Sãdhanã-Academy Proceedings in Engineering Sciences, Springer 2020, 10.1007/s12046-020-01378-2 Article

J. Thrinadh, S. Datta, and M. Masanta, "Studies on chip morphology and modes of tool wear during machining of Ti-6Al-4V using uncoated carbide tool: application of multi-walled carbon nanotubes added rice bran oil as nanocutting fluid", Machining Science and Technology, an International Journal, Taylor and Francis 2020, 10.1080/10910344.2020.1815040 Article

B. R. Sekhar, R. K. Nayak, S. R. Rout, and M. Masanta, "Wear characteristic of TiC coated AISI 1020 mild steel fabricated by TIG cladding method", Materials Today: Proceedings, vol.26, no.part 2, pp.3288-3291, Elsevier 2020, 10.1016/j.matpr.2020.02.466 Article

J. Thrinadh, S. Datta, and M. Masanta, "Wear morphology of microwave post-treated WC-Co tool during machining of Inconel 718 superalloy", Materials Today: Proceedings, Elsevier 2020, 10.1016/j.matpr.2020.05.020 Article

J. Thrinadh, S. K. Sahu, S. Datta, and M. Masanta, "EDM performance of Inconel 718 superalloy: application of multi-walled carbon nanotube (MWCNT) added dielectric media", Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol.41, no.305, Springer, August 2019, 10.1007/s40430-019-1813-9 Article

S. Ganguly, S. Sarkar, M. Masanta, and A. K. Mondal, "Effect of SiC nanoparticles on the wear behaviour of squeeze-cast AZ91–2.0Ca–0.3Sb alloy", Materials Science and Technology, Taylor and Francis, July 2019, 10.1080/02670836.2019.1639384 Article

J. Thrinadh, S. Datta, and M. Masanta, "Surface topographical characteristics of electro-discharge machined Ti-5Al-2.5Sn: effects of peak current", in MSIE 2019 Proceedings of the 2019 International Conference on Management Science and Industrial Engineering, pp.235-239, Association for Computing Machinery, Phuket, Thailand, May 2019, 10.1145/3335550.3335557 Inproceedings

K. Kumar, M. Masanta, and S. K. Sahoo, "Microstructure evolution and metallurgical characteristic of bead-on-plate TIG welding of Ti-6Al-4V alloy", Journal of Materials Processing Technology, vol.265, pp.34-43, Elsevier, March 2019, 10.1016/j.jmatprotec.2018.10.002 Article

T. D and M. Masanta, "Effect of Ti/B4C ratio on the microstructure and mechanical characteristics of TIG cladded TiC-TiB2 coating on Ti-6Al-4V alloy", Journal of Materials Processing Technology, vol.266, pp.184–197, Elsevier, February 2019, 10.1016/j.jmatprotec.2018.11.005 Article

J. Thrinadh, S. Datta, and M. Masanta, "Study of surface integrity and machining performance during main/rough cut and trim/finish cut mode of WEDM on Ti–6Al–4V: effects of wire material", Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol.41, pp.151, Springer, February 2019, 10.1007/s40430-019-1656-4 Article

A. Kushwaha, J. Thrinadh, S. Datta, and M. Masanta, "Assessment of surface integrity during electrical discharge machining of titanium grade 5 alloys (Ti-6Al-4V)", Materials Today: Proceedings, vol.18, no.part 7, pp.2477–2485, Elsevier 2019, 10.1016/j.matpr.2019.07.097 Article

K. Kumar, S. C. Deheri, and M. Masanta, "Effect of Activated Flux on TIG Welding of 304 Austenitic Stainless Steel", Materials Today: Proceedings, vol.18, no.part 7, pp.4792-4798, Elsevier 2019, 10.1016/j.matpr.2019.07.467 Article

A. Sahoo, D. T. Waghmare, A. Sahu, and M. Masanta, "Effect of Test Conditions on Tribological Behavior of NiTi–TiN-Coated Ti–6Al–4V Alloy Fabricated by TIG Cladding Method", Advances in Micro and Nano Manufacturing and Surface Engineering, Proceedings of AIMTDR 2018, ch.53, pp.593-601, Springer Nature Singapore Pte Ltd. 2019, 0.1007/978-981-32-9425-7_53 Inbook

S. Pani and M. Masanta, "Experimental Analysis of AA6063 Aluminium Alloy Machining by EDM with Hexagonal Shaped Tool Electrode", Materials Today: Proceedings, vol.18, no.part 7, pp.2723-2730, Elsevier 2019, 10.1016/j.matpr.2019.07.135 Article

J. S. Garbyal, C. K. Padhee, A. R. E, and M. Masanta, "Sliding Abrasive and Adhesive Wear Behavior of TIG-Cladded NiTi–W Coating Deposited on Ti–6Al–4V Alloy", Advances in Micro and Nano Manufacturing and Surface Engineering, Proceedings of AIMTDR 2018, ch.54, pp.603-611, Springer Nature Singapore Pte Ltd. 2019, 10.1007/978-981-32-9425-7_54 Inbook

T. D, A. S. Menon, and M. Masanta, "Study of Sliding Abrasive Wear Behavior of TiC-TiB2 Composite Coating Fabricated on Titanium Alloy by TIG Cladding Method", Advances in Micro and Nano Manufacturing and Surface Engineering, Proceedings of AIMTDR 2018, ch.52, pp.583-591, Springer Nature Singapore Pte Ltd. 2019, 10.1007/978-981-32-9425-7 Inbook

T. D, S. Kumari, and M. Masanta, "Ceramic-metal composite coating on steel using powder compact tool electrode by electro discharge coating process", Silicon, vol.10, no.4, pp.1625-1637, Springer, July 2018, 10.1007/s12633-017-9646-6 Article

. Rahul, S. Datta, and M. Masanta, "Surface integrity and metallurgical characteristics of the EDMed work surfaces of A2 tool steel (SAE 304SS) inconel 601 and Ti-6Al-4V: a comparative analysis", Silicon, vol.10, no.4, pp.1557-1572, Springer, July 2018, 10.1007/s12633-017-9640-z Article

T. D, M. Masanta, and A. K. Das, "In-situ TiC-TiB2 coating on Ti-6Al-4V alloy by tungsten inert gas (TIG) cladding method: Part-I. Microstructure evolution", Surface & Coatings Technology, vol.344, pp.541-552, Elsevier, June 2018, 10.1016/j.surfcoat.2018.03.082 Article

T. D and M. Masanta, "In-situ TiC-TiB2 coating on Ti-6Al-4V alloy by tungsten inert gas (TIG) cladding method: Part-II. Mechanical performance", Surface & Coatings Technology, vol.344, pp.579-589, Elsevier, June 2018, 10.1016/j.surfcoat.2018.03.083 Article

D. K. Mishra, . Rahul, S. Datta, M. Masanta, and S. S. Mahapatra, "Through hole making by electro-discharge machining (EDM) on inconel 625 super alloy using hollow copper tool electrode", Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engine, SAGE, June 2018, 10.1177/0954408918784701 Article

C. K. Sahoo and M. Masanta, "Microstructure and wear characteristic of hard and wear resistance TiC coating deposited on aluminium by tungsten inert gas (TIG) cladding process", Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol.40, no.247, Springer, May 2018, 10.1007/s40430-018-1178-5 Article

S. R. Shial, M. Masanta, and D. Chaira, "Recycling of waste Ti machining chips by planetary milling: generation of Ti powder and development of in situ TiC reinforced Ti-TiC composite powder mixture", Powder Technology, vol.329, pp.232–240, Elsevier, April 2018, 10.1016/j.powtec.2018.01.080 Article

. Rahul, S. Datta, M. Masanta, B. B. Biswal, and S. S. Mahapatra, "Analysis on surface characteristics of electro-discharge machined Inconel 718", International Journal of Materials and Product Technology, vol.56, no.1/2, pp.135-168, Inderscience Publishers 2018, 10.1504/IJMPT.2018.089121 Article

A. Behera and M. Masanta, "Effect of pulse-on-time on machining performance during WEDM of nano-TiO2 Dispersed austenite steel", Materials Today: Proceedings, vol.5, no.9, pp.20560-20566, Elsevier 2018, 10.1016/j.matpr.2018.06.434 Article

T. D, D. T. Waghmare, D. Kaladharan, and M. Masanta, "Effect of TiC content on sliding wear behavior of TiC-Ti metal matrix composite", Materials Today: Proceeding, vol.5, no.9, pp.19848–19853, Elsevier 2018, 10.1016/j.matpr.2018.06.349 Article

. Rahul, D. K. Mishra, S. Datta, and M. Masanta, "Effects of tool electrode on EDM performance of Ti-6Al-4V", Silicon, vol.10, no.5, pp.2263–2277, Springer 2018, 10.1007/s12633-018-9760-0 Article

S. Kumari, S. Datta, M. Masanta, G. Nandi, and P. K. Pal, "Electro-discharge machining of Inconel 825 super alloy: effects of tool material and dielectric flushing", Silicon, vol.10, no.5, pp.2079–2099, Springer 2018, 10.1007/s12633-017-9728-5 Article

K. Kumar, P. Mohan, and M. Masanta, "Influence of welding current on the mechanical property of 3 mm thick commercial 1050 aluminium butt joint weld by AC-TIG welding method", Materials Today:Proceedings, vol.5, pp.24141-24146, Elsevier 2018, 10.1016/j.matpr.2018.10.208 Article

D. T. Waghmare, C. K. Padhee, R. Prasad, and M. Masanta, "NiTi coating on Ti-6Al-4V alloy by TIG cladding process for improvement of wear resistance: Microstructure evolution and mechanical performances", Journal of Materials Processing Technology, vol.262, pp.551-561, Elsevier 2018, 10.1016/j.jmatprotec.2018.07.033 Article

S. Saroj, C. K. Sahoo, T. D, K. Kumar, and M. Masanta, "Sliding abrasive wear characteristic of TIG cladded TiC reinforced Inconel825 composite coating", International Journal of Refractory Metals and Hard Materials, vol.69, pp.119-130, Elsevier, December 2017, 10.1016/j.ijrmhm.2017.08.005 Article

T. D, S. Kumari, and M. Masanta, "Hard and wear resistance TiC-composite coating on AISI 1020 steel using powder metallurgy tool by electro-discharge coating process", Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol.39, no.11, pp.4719–4734, Springer, November 2017, 10.1007/s40430-017-0851-4 Article

C. K. Sahoo and M. Masanta, "Microstructure and tribological behaviour of TiC-Ni-CaF2 composite coating produced by TIG cladding process", Journal of Materials Processing Technology, vol.243, pp.229-245, Elsevier, May 2017, 10.1016/j.jmatprotec.2016.12.028 Article

K. Abhishek, S. Datta, M. Masanta, and S. S. Mahapatra, "Fuzzy Embedded Imperialist Competitive Algorithm (ICA) for Multi-Response Optimization during Machining of CFRP (Epoxy) Composites", in 2017 International Conference on Advances in Mechanical, Industrial, Automation and Management Systems (AMIAMS), Allahabad, pp.100-103, IEEE 2017, 10.1109/AMIAMS.2017.8069196 Inproceedings

T. D and M. Masanta, "Mechanical performance of in-situ TiC-TiB2 composite coating deposited on Ti-6Al-4V alloy by powder suspension electro-discharge coating process", Surface & Coatings Technology, vol.328, pp.192-203, Elsevier 2017, 10.1016/j.surfcoat.2017.08.048 Article

S. Saroj, C. K. Sahoo, and M. Masanta, "Microstructure and mechanical performance of TiC-Inconel825 composite coating deposited on AISI 304 steel by TIG cladding process", Journal of Materials Processing Technology, vol.249, pp.490–501, Elsevier 2017, 10.1016/j.jmatprotec.2017.06.042 Article

C. K. Sahoo, L. Soni, and M. Masanta, "Evaluation of microstructure and mechanical properties of TiC/TiC-steel composite coating produced by gas tungsten arc (GTA) coating process", Surface & Coatings Technology, vol.307, no.part a, pp.17-27, Elsevier, December 2016, 10.1016/j.surfcoat.2016.08.056 Article

C. Upadhyay, S. Datta, M. Masanta, and S. S. Mahapatra, "An experimental investigation emphasizing surface characteristics of electro-discharge-machined Inconel 601", Journal of the Brazilian Society of Mechanical Sciences and Engineering, pp.1-16, Springer, October 2016, 10.1007/s40430-016-0643-2 Article

P. Bhale, H. Shastri, A. Mondal, M. Masanta, and S. Kumar, "Effect of deep cryogenic treatment on microstructure and properties of AE42 Mg alloy", Journal of Materials Engineering and Performance, vol.25, no.9, pp.3590–3598, Springer, September 2016, 10.1007/s11665-016-2238-6 Article

C. K. Sahoo and M. Masanta, "Microstructure and mechanical properties of TiC-Ni coating on AISI304 steel produced by TIG cladding process", Journal of Materials Processing Technology, vol.240, pp.126-137, September 2016, 10.1016/j.jmatprotec.2016.09.018 Article

M. Masanta, S. Shariff, and A. R. Choudhury, "Microstructure and properties of TiB2-TiC-Al2O3 coating prepared by laser assisted SHS and subsequent cladding with micro-/nano-TiO2 as precursor constituent", Materials and Design, vol.90, pp.307-317, Elsevier, January 2016, 10.1016/j.matdes.2015.10.135 Article

K. Kumar, P. Ahirwar, and M. Masanta, "Effect of varying root gap on butt welding of 6 mm thick AISI 1020 plate by autogenous TIG welding process", Materials Science Forum, vol.880, pp.21-24, Trans-tech publication 2016, 10.4028/www.scientific.net/MSF.880.21 Article

K. Ushashri and M. Masanta, "Hard TiC coating on AISI304 steel by laser surface engineering using pulsed Nd:YAG laser", Materials and Manufacturing Processes, vol.30, no.6, pp.730-735, Taylor & Francis, December 2015, 10.1080/10426914.2014.973593 Article

C. Sahoo and M. Masanta, "Effect of pulse laser parameters on TiC reinforced AISI 304 stainless steel composite coating by laser surface engineering process", Optics and Lasers in Engineering, vol.67, pp.36-48, Elsevier, April 2015, 10.1016/j.optlaseng.2014.10.010 Article

J. K. Sahu, C. K. Sahoo, and M. Masanta, "In-Situ TiB2–TiC–Al2O3 composite coating on aluminum by laser surface modification", Materials and Manufacturing Processes, vol.30, no.6, pp.736-742, Taylor & Francis, December 2015, 10.1080/10426914.2014.984225 Article

C. K. Sahoo, J. K. Sahu, and M. Masanta, "Effect of Pulsed Nd:YAG Laser Parameters in Preplaced TiC Coating on Aluminium Substrate", Lasers Based Manufacturing, 5th International and 26th All India Manufacturing Technology, Design and Research Conference, AIMTDR 2014, ch.8, pp.117-137, Springer 2015, 10.1007/978-81-322-2352-8_8 Inbook

P. A. Xess, S. Biswas, and M. Masanta, "Optimization of the EDM parameters on machining Ti-6Al-4V alloy with multiple quality characteristics", Applied Mechanics and Materials, vol.619, pp.89-93, Trans Tech Publications, August 2014, 10.4028/www.scientific.net/AMM.619.89 Article

M. Masanta, S. Shariff, and A. R. Choudhurya, "A comparative study of the tribological performances of laser clad TiB2–TiC–Al2O3 composite coatings on AISI 1020 and AISI 304 substrates", Wear, vol.271, no.7-8, pp.1124-1133, Elsevier, July 2011, 10.1016/j.wear.2011.05.009 Article

M. Masanta, S. Shariff, and A. R. Choudhurya, "Evaluation of modulus of elasticity, nano-hardness and fracture toughness of TiB2–TiC–Al2O3 composite coating developed by SHS and laser cladding", Materials Science and Engineering: A, vol.528, no.16-17, pp.5327-5335, Elsevier, June 2011, 10.1016/j.msea.2011.03.057 Article

M. Masanta, P. Ganesh, R. Kaul, and A. R. Choudhury, "Microstructure and mechanical properties of TiB2–TiC–Al2O3–SiC composite coatings developed by combined SHS, sol–gel and laser technology", Surface & Coatings Technology, vol.204, no.21–22, pp.3471-3480, Elsevier, August 2010, 10.1016/j.surfcoat.2010.04.018 Article

M. Masanta, S. Shariff, and A. R. Choudhury, "Tribological behavior of TiB2–TiC–Al2O3 composite coating synthesized by combined SHS and laser technology", Surface & Coatings Technology, vol.204, no.16-17, pp.2527-2538, Elsevier, May 2010, 10.1016/j.surfcoat.2010.01.027 Article

M. Masanta, P. Ganesh, R. Kaul, A. Nath, and A. R. Choudhury, "Development of a hard nano-structured multi-component ceramic coating by laser cladding", Materials Science and Engineering A, vol.508, no.1-2, pp.134-140, Elsevier 2009, 10.1016/j.msea.2008.12.031 Article

B., M. Masanta, B., and B. Bhattacharyya, "Investigation of electro-discharge micro-machining of titanium super alloy", International Journal Advanced Manufacturing Technology, vol.41, pp.1094-1106, Springer 2009, 10.1007/s00170-008-1561-y Article

Hide Publications (-)

Courses Taught

ME2202 : Primary Production Processes {Theory}
ME2261 : Basic Manufacturing Processes {Theory}
ME232 : Basic Manufacturing Technology {Theory}
ME250 : Thermal Engineering {Theory}
ME3231 : Metrology, Quality Control and Reliability {Theory}
ME6203 : Production Technology {Theory}
ME6204 : Modern Manufacturing Processes {Theory}
ME631 : Production Technology {Theory}
ME632 : Machine Tool Technology {Theory}
ME633 : Modern Manufacturing Processes {Theory}
ME640 : Laser Application in Manufacturing {Theory}
ME170 : Machine Drawing and Solid Modeling {Practical}
ME271 : Thermal Engineering Laboratory {Practical}
ME272 : Mechanical Engineering Laboratory {Practical}
ME371 : Advanced Manufacturing Practice - II {Practical}
ME473 : Advanced Production Engineering Laboratory {Practical}
ME6278 : Non-Conventional Machining Laboratory {Practical}
WS270 : Advanced Manufacturing Practice I {Practical}
WS371 : Advanced Manufacturing Practice II {Practical}

Research Scholars

Ph.D. Students [7]

Development of TiC based Wear Resistance Composite Coating on AISI 304 Steel by Pulsed Laser and TIG Cladding Process

Chinmaya Kumar Sahoo

Enrolled: Jul 2013

Graduated : Apr 2017

Supervisor

In-situ TiC-TiB₂ coating on Ti-6Al-4V alloy by powder suspension electro-discharge coating (EDC) and tungsten inert gas (TIG) cladding processes

Tijo D

Enrolled: Jul 2014

Graduated : Nov 2018

Supervisor

Ti-6Al-4V Alloy Weld Joint by Variant of TIG Welding Method: Characterization and Mechanical Performance Evaluation

Kamlesh Kumar

Enrolled: Jul 2014

Graduated : Mar 2020

Supervisor

Experimental Studies on Machinability Assessment of Difficult-to-Cut alloys (Inconel 718 and Ti-6Al-4V) during Traditional and Non-Traditional Machining

Jadam Thrinadh

Enrolled: Jul 2017

Graduated : Feb 2021

Co-Supervisor

Surface Modification of Ti-6Al-4V Alloy by Depositing MMC Coating with Variant of Matrix Phases through TIG Cladding Method

Malaya Kumar Debta

Enrolled: Jul 2018

Thesis Submitted : May 2023

Supervisor

Manufacturing Engineering

M D Aseef Khan

Enrolled: Jan 2020

Continuing

Supervisor

Advanced Material Processing

Dikshyanta Sahoo

Enrolled: Jul 2023

Continuing

Supervisor

Dissertations

PG Dissertation

Lalit Soni (213ME2419), "TiC COATING ON AISI 304 STAINLESS STEEL BY TUNGSTEN INERT GAS (TIG) CLADDING USING PREPLACED POWDER" - M.Tech. Supervisor 2014-15 Spring
Pankaj Ahirwar (213ME2400), "Experimental Investigation on Autogenous Tungsten Inert Gas (TIG) Welding of AISI 1020 Mild Steel" - M.Tech. Supervisor 2014-15 Spring
Shilpi Kumari (213ME2408), "Study of TiC Coating on different type Steel by Electro Discharge Coating" - M.Tech. Supervisor 2014-15 Spring
Ashish Jain (214ME2272), "Multi objective optimization of process parameters for through hole machining of Ti-6Al-4V alloy by EDM" - M.Tech. Supervisor 2015-16 Spring
Chirag Panwariya (214ME2343), "Evaluation of Nitride Layer on Ti-6Al-4V Titanium Alloy by Tungsten Inert Gas (TIG) Nitriding Method" - M.Tech. Supervisor 2015-16 Spring
Naga Pavan Kumar Gattu (214ME2326), "Surface Modification of AISI 304 Stainless Steel by Electrical Discharge Coating using Powder Suspension Method" - M.Tech. Supervisor 2015-16 Spring
Nitesh (214ME2270), "Effect of Pulsed Current for Autogenous TIG Welding of AISI 304 Stainless Steel" - M.Tech. Supervisor 2015-16 Spring
Satya Ranjan Shial (215ME6423), "Development of Ti-TiC composites by powder metallurgy route using recycled machined Ti chips" - M.Tech. Supervisor 2016-17 Spring
Sweta Saroj (215ME2403), "Deposition of TiC-Inconel825 composite coating on AISI 304 steel by TIG cladding process" - M.Tech. Supervisor 2016-17 Spring
Chinmaya Kumar Padhee (216ME2372), "Microstructure evolution and mechanical performance of W-NiTi composite coating produced on Ti-6Al-4V titanium alloy by TIG cladding method" - M.Tech. Supervisor 2017-18 Spring
Dipak Tanaji Waghmare (216ME2378), "“NiTi coating on Ti-6Al-4V alloy by TIG cladding process for improvement of wear resistance: microstructure evolution and mechanical performances”" - M.Tech. Supervisor 2017-18 Spring
Manoranjan Sahoo (216CH2118), "Identification of Cluster of High Risk Job Vendors and Preparation of Specific Safety Clauses Manoranjan Sahoo" - M.Tech. Supervisor 2017-18 Spring
Rakhi Singh (216CH2121), "Study and Analysis of Machine Guarding in Foundry Division of Tata Motors Limited, Jamshedpur." - M.Tech. Supervisor 2017-18 Spring
Ritesh Prasad (216ME2375), "Study the Microstructural and Mechanical behaviors of large surface area cladding of NiTi on Ti-Alloy by TIG surface modification technique" - M.Tech. Supervisor 2017-18 Spring
Abdu Raheem E (217ME2218), "Characterization and mechanical performance of TIG cladded TiC-Ni composite coating fabricated on AISI 1020 mild steel" - M.Tech. Supervisor 2018-19 Spring
Arti Sahu (217ME2229), "Large Area TiC-Ni Composite Coating on AISI 304 Stainless Steel Substrate by TIG Cladding Method" - M.Tech. Supervisor 2018-19 Spring
Sushanta Chandra Deheri (217ME2216), "Effect of Activated Flux on TIG Welding of 304 Austenitic Stainless Steel" - M.Tech. Supervisor 2018-19 Spring
Bodala Raja Sekhar (218ME2189), "Fabrication of Inconel 825 coating on AISI 1020 mild steel substrate by Tungsten Inert Gas (TIG) cladding method" - M.Tech. Supervisor 2019-20 Spring
Pilli Jaya Teja (218ME2208), "AISI 304 stainless steel coating on AISI 1020 mild steel by TIG cladding method for the improvement of mechanical properties" - M.Tech. Supervisor 2019-20 Spring
Sanjay Krishnan C (218ME2209), "Characterization and mechanical performance of Inconel 825 coating fabricated on AISI 304 stainless steel by TIG Cladding process" - M.Tech. Supervisor 2019-20 Spring
Abhishek Biswas (219ME2269), "Microstructure and mechanical performance of in-situ deposited TiN-TiB composite coating on Ti-6Al-4V alloy by TIG cladding" - M.Tech. Supervisor 2020-21 Spring
Neeraj Kumar Gupta (219ME2303), "Characterization and mechanical performance of TIG cladded in-situ TiC-TiB2 composite coating fabricated on AISI 304 Stainless steel" - M.Tech. Supervisor 2020-21 Spring
Nitin Kumar (219ME2565), "Feasibility of TIG welding method for additive manufacturing of stainless steel" - M.Tech. Supervisor 2020-21 Spring
Kapildev Mahra (220ME2050), "3D-Micromachining of Ti-6Al-4V Alloy Using Fiber Laser" - M.Tech. Supervisor 2021-22 Spring
Pyla Kaushik Raj (220ME2396), "TiN-Ti Composite Coating on CP-Titanium by Microcladding Technique using Fiber Laser" - M.Tech. Supervisor 2021-22 Spring
Vannepuri Dileep Kumar (220ME2047), "CoCrFeNiTi High-Entropy Alloy Coating on AISI-1020 Steel by TIG Arc Scanning for Wear Resistance" - M.Tech. Supervisor 2021-22 Spring
Siddhartha Sarangi (221ME2521), "Micromachining of circular workpiece(AISI 304 steel) using fiber laser" - M.Tech. Supervisor 2022-23 Spring
Subhashish Parhi (221ME2113), "TiN-Inconel825 coating on cylindrical surface by laser micro-cladding method" - M.Tech. Supervisor 2022-23 Spring

UG Dissertation

Jayadev Das (111ME0289), "DESIGN AND DELVELOPEMENT OF A POWDER FEEDINGSYSTEM FOR TUNGSTEN INERT GAS (TIG) CLADDING" - B.Tech. Supervisor 2014-15 Spring
Patil Gagan Shivadas (111ME0348), "Design and development of automated filler rod feeding system for TIG welding" - B.Tech. Supervisor 2014-15 Spring
Ranbir Pratik Pradhan (111ME0336), "Design and Development of Automated Filler Rod Feeding System for TIG Welding" - B.Tech. Supervisor 2014-15 Spring
Soumya Ranjan Gochhayat (111ME0294), "Tungsten Inert Gas (TIG) Assisted TiC-Ni Coating on AISI 304 Stainless Steel" - B.Tech. Supervisor 2014-15 Spring
Ashutosh Das (112ME0331), "MODIFICATION OF AN AUTOMATED FILLER ROD FEEDING SYSTEM FOR TIG WELDING" - B.Tech. Supervisor 2015-16 Spring
Aishwarya Behera (113ME0349), "STUDY THE EFFECT OF WEDM PARAMETERS FOR MACHINING OF TiO2-DISPERSED AUSETNITE STEEL" - B.Tech. Supervisor 2016-17 Spring
Binit Sarangi (113ME0419), "Design and Fabrication of an Automated Filler Rod Feeding System for TIG Welding of Fixed and Movable Workpiece" - B.Tech. Supervisor 2016-17 Spring
Punya Kalyan Samantaray (113ME0418), "Design and Fabrication of an Automated Filler Rod Feeding System for TIG Welding of Fixed and Movable Workpiece" - B.Tech. Supervisor 2016-17 Spring
Deekshith Kaladharan (113ME0373), "Study of Sliding Wear Behavior of Ti-TiC Metal Matrix Composites" - B.Tech. Supervisor 2017 Summer
Abhratej Sahoo (114ME0244), "Study of wear behaviour of Ti6Al4V coated with NiTi and TiN via TiG Cladding" - B.Tech. Supervisor 2017-18 Spring
Jyotirmoy Singh Garbyal (114ME0225), "Study of tribological properties of TIG cladded Ni-Ti-W composite coating on Ti-6Al-4V alloy" - B.Tech. Supervisor 2017-18 Spring
Ajay Sivasankaran Menon (114ME0036), "Study of Sliding Abrasive Wear Behavior of TIG Cladded TiC-TiB2 Composite Coating Deposited on Titanium Alloy" - B.Tech. Supervisor 2018 Summer
Rajesh Kumar Nayak (115ME0452), "EFFECT OF PROCESSING CURRENT ON THE WEAR PROPERTIES OF TiC COATED MILD STEEL FABRICATED BY TIG CLADDING" - B.Tech. Supervisor 2018-19 Spring
Ravi Mishra (115ME0046), "Experimental Investigation for machining of AZ91D (90% Mg) Alloy by Wire-cut EDM" - B.Tech. Supervisor 2018-19 Spring
Ritesh Pokhrel (115ME0048), "EFFECT OF TEMPERATURE AND LOAD ON SLIDING WEAR CHARACTERSTICS OF AZ91D ALLOY" - B.Tech. Supervisor 2018-19 Spring
Sumeet Ranjan Rout (115ME0464), "Effect of load on the wear properties of TiC coated mild steel fabricated by TIG cladding" - B.Tech. Supervisor 2018-19 Spring
Ajay Bishnoi (116ME0435), "STUDY OF WEAR BEHAVIOR OF TiC-TiB2 COATED Ti-6Al-4V ALLOY ON ABRASIVE DISC" - B.Tech. Supervisor 2019-20 Spring
Mohammed Rameez (116ME0482), "STUDY OF WEAR BEHAVIOR OF TiC-TiB2 COATED Ti-6Al-4V ALLOY ON HARDENED STEEL DISC" - B.Tech. Supervisor 2019-20 Spring
Joshua Thomas Benoy (118ME0439), "Chainless Bicycle" - B.Tech. Supervisor 2022 Summer
Norbu Tshering (118ME0815), "Chainless Bicycle" - B.Tech. Supervisor 2022 Summer
Anjangi Sudhir (119ME0380), "Laser beam Micro-drilling of Ti-6Al-4V using fiber laser" - B.Tech. Supervisor 2022-23 Spring
Ayush Chak (119ME0707), "Laser Micro-Cladding of TiN + Inconel 825 on Stainless Steel 304" - B.Tech. Supervisor 2022-23 Spring
Mihir Patel (119ME0364), "SLOT CUTTING ON TI-6AL-4V BY LASER BEAM MACHINING" - B.Tech. Supervisor 2022-23 Spring
Prawesh Pahari (119ME0727), "DESIGN OF WIRE ARC ADDITIVE MANUFACTURING SETUP USING TIG WELDING MACHINE" - B.Tech. Supervisor 2022-23 Spring

Awards and Honours

No Awards/Honours Found....

Academic Identity

Orcid Id

Scopus Id

Researcher Id

Google Scholar Id

Manoj Masanta

67

Publications

2

Sponsored Projects

0

Consultancy Projects

7

Doctoral Students

2

Continuing Education

28

PG Dissertation

Personal Information

Prof. Manoj Masanta

Education Qualification

Experience

Teaching Experience

Expertise Information

Research Group

Areas of Interest

Projects

Continuing Education

Publications

15

Google Scholar h-index

22

Google Scholar i10-index

14

Scopus h-index

Total Publications: 67

Courses Taught

Research Scholars

Ph.D. Students [7]

Dissertations

PG Dissertation

UG Dissertation

Awards and Honours