M. A. Kamde, Y. Mahton, and P. Saha, "A stearic acid/polypyrrole-based superhydrophobic coating on squeeze-cast Mg-Sr-Y-Ca-Zn alloys for improved salt-water corrosion", Surface and Coatings Technology, vol.448, pp.128890, Elsevier, October 2022,
10.1016/j.surfcoat.2022.128890
Article
L. Dashairya, P. S. Kispotta, Y. Mahton, E. Kumari, A. Kumar, and P. Saha, "Zirconium diboride assisted superhydrophobic/superoleophilic surface modification of polyurethane sponge for continuous oil-water separation and emulsion purification", Journal of the Taiwan Institute of Chemical Engineers, vol.136, pp.104398, Elsevier, July 2022,
10.1016/j.jtice.2022.104398
Article
L. Dashairya, D. Das, and P. Saha, "Elucidating the role of graphene and porous carbon coating on nanostructured Sb2S3 for superior lithium and sodium storage", Journal of Alloys and Compounds, vol.883, no.11, pp.160906, Elsevier, November 2021,
10.1016/j.jallcom.2021.160906
Article
M. A. Kamde, Y. Mahton, J. Ohodnicki, M. Roy, P. Saha, and P. Kumta, "Corrigendum to “Effect of cerium-based conversion coating on corrosion behavior of squeeze cast Mg-4 wt% Y alloy in 0.1 M NaCl solution” [Surf. Coat. Technol. 421C (2021) 127451]", Surface and Coatings Technology, vol.424, pp.127683, Elsevier, October 2021,
10.1016/j.surfcoat.2021.127683
Article
M. A. Kamde, Y. Mahton, J. Ohodnicki, M. Roy, and P. Saha, "Effect of cerium-based conversion coating on corrosion behavior of squeeze cast Mg-4 wt% Y alloy in 0.1 M NaCl solution", Surface and Coatings Technology, vol.421, no.9, pp.127451, Elsevier, September 2021,
10.1016/j.surfcoat.2021.127451
Article
P. Saha, T. R. Mohanta, and A. Kumar, "SEI layer and impact on Si-anodes for Li-ion batteries", Silicon Anode Systems for Lithium-Ion Batteries, ch.6, vol.1, pp.183-263, Elsevier, September 2021,
10.1016/B978-0-12-819660-1.00001-3
Inbook
L. Dashairya, S. Sharma, A. Rathi, P. Saha, and S. Basu, "Solar-light-driven photocatalysis by Sb2S3/carbon based composites towards degradation of noxious organic pollutants", Materials Chemistry and Physics, vol.273, pp.125120, Elsevier 2021,
10.1016/j.matchemphys.2021.125120
Article
L. Dashairya, D. Das, S. Jena, A. Mitra, and P. Saha, "Controlled scalable synthesis of yolk-shell antimony with porous carbon anode for superior Na-ion storage", Nano Select, vol.2, no.2, pp.373-388, Wiley-VCH GmbH, November 2020,
10.1002/nano.202000171
Article
L. Dashairya, A. Mehta, P. Saha, and S. Basu, "Visible-light-induced enhanced photocatalytic degradation of Rhodamine-B dye using BixSb2-xS3 solid-solution photocatalysts", Journal of Colloid and Interface Science, vol.561, pp.71-82, Elsevier, March 2020,
10.1016/j.jcis.2019.11.118
Article
L. Dashairya and P. Saha, "Antimony Sulphide Nanorods Decorated onto Reduced Graphene Oxide Based Anodes for Sodium-Ion Battery", Materials Today: Proceedings, vol.21, no.4, pp.1899-1904, Elsevier, January 2020,
10.1016/j.matpr.2020.01.247
Article
P. Saha, G. M, L. Dashairya, and M. A. Kamde, "A stearic acid/polypyrrole based superhydrophobic coating on a macroporous sponge for oil-spill remediation and improved salt-water corrosion of Mg alloys", in 82nd Indian Materials Conclave and 31st AGM of Materials Research Society of India, Central Glass and Ceramic Research Institute, Kolkata, India 2020
Inproceedings
L. Dashairya, D. Das, and P. Saha, "Binder-free electrophoretic deposition of Sb/rGO on Cu foil for superior electrochemical performance in Li-ion and Na-ion batteries", Electrochimica Acta, vol.358, pp.136948, Elsevier 2020,
10.1016/j.electacta.2020.136948
Article
L. Dashairya, D. Das, and P. Saha, "Electrophoretic deposition of antimony/reduced graphite oxide hybrid nanostructure: a stable anode for lithium-ion batteries", Materials Today Communications, vol.24, pp.101189, Elsevier 2020,
10.1016/j.mtcomm.2020.101189
Article
L. Dashairya, G. M, and P. Saha, "Synergistic effect of Zr/Cl dual-ions mediated pyrrole polymerization and development of superhydrophobic melamine sponges for oil/water separation", Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol.599, pp.124877, Elsevier 2020,
10.1016/j.colsurfa.2020.124877
Article
L. Dashairya, P. Saha, V. Chaturvedi, and M. Shelke, "A Benign Sol-Gel Route Towards Porous Carbon Coated Sb Nanoparticles: A High-Performance Li-Ion Batteries Anode", in 236th ECS Meeting, Atlanta, Georgia, USA, October 2019
Inproceedings
L. Dashairya, D. Das, S. B. Majumder, and P. Saha, "Exploring the Effect of Varying Reduced Graphene Oxide Content on the Stable Electrochemical Performance of Sb Nanoparticles Anode for Na-Ion Batteries", in 236th ECS Meeting, Atlanta, Georgia, USA, October 2019
Inproceedings
P. Saha and D. Sarkar, "Whiteware and glazes", Ceramic Processing Industrial Practices, ch.7, pp.31, CRC Press, June 2019,
10.1201/9781315145808-7
Inbook
M. Pandiripalli, Y. Mahton, and P. Saha, "Effect of vanadium micro-alloying on the microstructure and mechanical properties of Al 354.0 alloy at room temperature", in Fourth International Conference on Nanotechnology for Better Living Theme: Technological Advancements of Polymer Composites, April 2019
Inproceedings
L. Dashairya, D. Das, S. B. Majumder, and P. Saha, "Exploring the effect of varying reduced graphene oxide content on the cycling stability of Sb nanoparticles for Lithium-ion batteries anode", in Fourth International Conference on Nanotechnology for Better Living Theme: Technological Advancements of Polymer Composites, April 2019
Inproceedings
Y. Mahton, M. A. Kamde, and P. Saha, "Methyltrichlorosilane based superhydrophobic coating on AA6061 alloy for improved salt-water corrosion", in Fourth International Conference on Nanotechnology for Better Living Theme: Technological Advancements of Polymer Composites, April 2019
Inproceedings
J. Wu, B. Lee, P. Saha, and P. Kumta, "A feasibility study of biodegradable magnesium-aluminum-zinc-calcium-manganese (AZXM) alloys for tracheal stent application", Journal of Biomaterials Applications, vol.33, no.8, pp.1080-1093, Sage, March 2019,
10.1177/0885328218824775
Article
L. Dashairya, A. Sahu, and P. Saha, "Stearic acid treated polypyrrole-encapsulated melamine formaldehyde superhydrophobic sponge for oil recovery", Advanced Composites and Hybrid Materials, vol.2, no.1, pp.70-82, Springer, March 2019,
10.1007/s42114-019-00084-w
Article
L. Dashairya, M. Sharma, S. Basu, and P. Saha, "SnS2/RGO based nanocomposite for efficient photocatalytic degradation of toxic industrial dyes under visible-light irradiation", Journal of Alloys and Compunds, vol.774, pp.625-636, Elsevier, February 2019,
10.1016/j.jallcom.2018.10.008
Article
L. Dashairya, P. Saha, V. Chaturvedi, and M. Shelke, "Polymer-derived porous carbon spheres coated Sb nanoparticles: a high performance anode for Li-ion batteries", in 2019 International Conference and 82nd Annual Session of Indian Ceramic Society, Jamshedpur, India, January 2019
Inproceedings
L. Dashairya, D. D. Barik, and P. Saha, "Methyltrichlorosilane functionalized silica nanoparticles-treated superhydrophobic cotton for oil–water separation", Journal of Coatings Technology and Research, vol.16, no.4, pp.1021-1032, Springer 2019,
10.1007/s11998-018-00177-z
Article
P. Saha and D. Sarkar, "Miniaturization of complex ceramics", Ceramic Processing Industrial Practices, ch.9, pp.284-319, CRC Press 2019,
10.1201/9781315145808-9
Inbook
L. Dashairya, M. Sharma, S. Basu, and P. Saha, "Antimony sulfide nanorods decorated onto reduced graphene oxide (Sb2S3/rGO) for photocatalytic dye degradation under visible light irradiation", in Advanced Materials for Energy and Environmental Applications AMEEA-2018, NIT, Rourkela, December 2018
Inproceedings
L. Dashairya, M. Sharma, S. Basu, and P. Saha, "Flower-like SnS2 for photocatalytic dye degradation under visible light", in International Conferecne on Nanotechnology: Ideas, Innovations, and Initiatives-2017, pp.232, Roorkee, Uttarakhand, December 2018
Inproceedings
M. A. Kamde, Y. Mahton, and P. Saha, "A ceria based conversion coating on squeeze cast Mg- 4wt. %Y alloy for improved corrosion resistance in 0.1 M NaCl solution", in Materials Science & Technology (MS&T 2018), Columbus OH, USA, October 2018
Inproceedings
G. M, L. Dashairya, and P. Saha, "A simple fabrication of stearic acid functionalizedpolypyrrole encapsulated melamine formaldehyde (SA/PPy/MF)superhydrophobic/superoleophilic macroporous sponge for oil-water separation", in Meeting: Materials Science & Technology 2018, October 2018
Inproceedings
Y. Mahton, M. A. Kamde, and P. Saha, "Microstructural evolution and corrosion assessment in saline water of 2xx.0 aluminum alloys developed by squeeze casting technique", in Meeting: Materials Science & Technology 2018, October 2018
Inproceedings
L. Dashairya and P. Saha, "Polymer-derived porous carbon spheres modified superhydrophobic melamine formaldehyde sponge (PCS@MF) for oil spill remediation", in Materials Science & Technology (MS&T 2018), Columbus OH, USA, October 2018
Inproceedings
L. Dashairya and P. Saha, "Antimony sulfide nanorods decorated onto reduced graphene oxide based anodes for sodium-ion battery", in Materials Today: Proceedings, Elsevier 2018
Inproceedings
L. Dashairya, M. Sharma, S. Basu, and P. Saha, "Enhanced dye degradation using hydrothermally synthesized nanostructured Sb2S3/rGO under visible light irradiation", Journal of Alloys and Compounds, vol.735, pp.234-245, Elsevier 2018,
10.1016/j.jallcom.2017.11.063
Article
P. Saha and L. Dashairya, "Reduced graphene oxide modified melamine formaldehyde (rGO@MF) superhydrophobic sponge for efficient oil–water separation", Journal of Porous Materials, pp.1-14, Springer Nature 2018,
10.1007/s10934-018-0560-0
Article
L. Dashairya, M. Rout, and P. Saha, "Reduced graphene oxide-coated cotton as an efficient absorbent in oil-water separation", Advanced Composites and Hybrid Materials, vol.1, no.1, pp.135-148, Springer Nature 2018,
10.1007/s42114-017-0019-9
Article
L. Dashairya and P. Saha, "Reduced graphene oxide decorated Sb nanoparticles: A high performance anode for sodium- ion batteries", in Electrochemical Energy Storage and Conversion Systems”(Battery),Coimbatore, Tamilnadu, India. Dec 2017, December 2017
Inproceedings
P. Saha, P. Jampani, M. Datta, D. Hong, B. Gattu, P. Patel, K. Kadakia, A. Manivannan, and P. Kumta, "A rapid solid-state synthesis of electrochemically active chevrel phases (Mo6T8; T = S, Se) for rechargeable magnesium batteries", Nano Research, vol.10, no.12, pp.4415-4435, Springer 2017,
10.1007/s12274-017-1695-z
Article
B. K. Barkey, S. S. Das, A. Meher, and P. Saha, "Preparation and microstructural characterization of niobium pentoxide doped barium strontium titanate glass and glass-ceramics", Transactions of the Indian Ceramic Society, vol.76, no.1, pp.21-30, Taylor & Francis 2017,
10.1080/0371750X.2016.1233830
Article
.. M. Selvam, . K. Saminathan, . P. Siva, P. Saha, and . V. Rajendran, "Corrosion behavior of Mg/graphene composite in aqueous electrolyte", Materials Chemistry and Physics, vol.172, pp.129-136, Elsevier 2016,
10.1016/j.matchemphys.2016.01.051
Article
P. J. Hanumantha, P. Saha, M. K. Datta, D. Hong, C. U. Okoli, A. Manivannan, and P. N. Kumta, "Electrochemical Performance of Solid State Derived Chevrel Phase Mo6T8 (T = S, Se) Cathodes for Rechargeable Sodium and Magnesium-Ion Batteries", in 227th ECS Meeting, The Electrochemical Society, Chicago Illinois, USA. May 2015, The Electrochemical Society, May 2015
Inproceedings
P. Saha, M. Roy, M. K. Datta, B. Lee, and P. Kumta, "Effects of grain refinement on the biocorrosion and in vitro bioactivity of magnesium", Materials Science and Engineering: C, vol.57, pp.294-303, Elsevier 2015,
10.1016/j.msec.2015.07.033
Article
P. Saha, P. Jampani, M. Datta, D. Hong, C. Okoli, A. Manivannan, and P. Kumta, "Electrochemical performance of chemically and solid state-derived chevrel phase Mo6T8 (T = S, Se) positive electrodes for sodium-ion batteries", Journal of Physical Chemistry C, vol.119, no.11, pp.5771-5782, ACS Publications 2015,
10.1021/jp509057w
Article
P. Saha, P. Jampani, D. Hong, B. Gattu, J. Poston, A. Manivannan, M. K. Datta, and P. Kumta, "Synthesis and electrochemical study of Mg1.5MnO3: a defect spinel cathode for rechargeable magnesium battery", Materials Science and Engineering: B, vol.202, pp.8-14, Elsevier 2015,
10.1016/j.mseb.2015.08.008
Article
P. Saha, P. Jampani, M. K. Datta, C. Okoli, A. Manivannan, and P. Kumta, "A convenient approach to Mo6S8 chevrel phase cathode for rechargeable magnesium battery", Journal of The Electrochemical Society, vol.161, no.4, pp.a593-a598, ECS 2014,
10.1149/2.061404jes
Article
M. K. Datta, R. Kuruba, P. Jampani, S. J. Chung, P. Saha, R. Epur, . Karankadakia, P. Patel, B. Gattu, A. Manivannan, and P. Kumta, "Electrochemical properties of a new nanocrystalline NaMn2O4 cathode for rechargeable sodium ion batteries", Materials Science and Engineering: B, vol.188, pp.1-7, Elsevier 2014,
10.1016/j.mseb.2014.05.007
Article
P. Kumta, R. Epur, M. Datta, P. Saha, B. Gattu, and R. Kuruba, "Engineering nanoscale materials and systems for high-capacity lithium ion anodes: Progress to date", in AABC 2014 - Advanced Automotive Battery Conference, LLIBTA Symposium Track A: Cell Materials and Chemistry and Track B: Battery 2014
Inproceedings
M. K. Datta, M. Ramanathan, P. Jampani, P. Saha, R. Epur, K. Kadakia, S. J. Chung, P. Patel, B. Gattu, A. Manivannan, and P. Kumta, "High energy mechano-chemical milling: convenient approach to synthesis of LiMn1.5Ni0.5O4 high voltage cathode for lithium ion batteries", Materials Science & Engineering: B, vol.190, pp.119-125, Elsevier 2014,
10.1016/j.mseb.2014.09.015
Article
P. N. Kumta, M. K. Datta, A. Manivannan, and P. Saha, "Rapid Solution Chemistry Approach for Synthesizing Mo6S8 Chevrel Phase Cathode for Rechargeable Magnesium Battery", in 225th ECS Meeting, The Electrochemical Society, Orlando, Florida, USA. May 2014, The Electrochemical Society 2014
Inproceedings
P. Saha, M. K. Datta, O. Velikokhatnyi, A. Manivannan, D. Alman, and P. Kumta, "Rechargeable magnesium battery: current status and key challenges for the future", Progress in Materials Science, vol.66, pp.1-86, Elsevier 2014,
10.1016/j.pmatsci.2014.04.001
Article
D. Lv, T. Xu, P. Saha, M. K. Datta, M. Gordin, A. Manivannan, P. Kumta, and D. Wang, "A scientific study of current collectors for Mg batteries in Mg(AlCl2EtBu)2/THF electrolyte", Journal of The Electrochemical Society, vol.160, no.2, pp.a351-a355, ECS 2013,
10.1149/2.085302jes
Article
Da. T. Chou, D. Hong, P. Saha, J. Ferrero, B. Lee, Z. Tan, Z. Dong, and P. Kumta, "In vitro and in vivo corrosion, cytocompatibility and mechanical properties of biodegradable Mg–Y–Ca–Zr alloys as implant materials", Acta Biomaterialia, vol.9, no.10, pp.8518-8533, Elsevier 2013,
10.1016/j.actbio.2013.06.025
Article
D. Hong, P. Saha, Da. T. Chou, B. Lee, B. Collins, Z. Tan, Z. Dong, and P. Kumta, "In vitro degradation and cytotoxicity response of Mg–4% Zn–0.5% Zr (ZK40) alloy as a potential biodegradable material", Acta Biomaterialia, vol.9, no.10, pp.8534-8547, Elsevier 2013,
10.1016/j.actbio.2013.07.001
Article
M. K. Datta, R. Epur, P. Saha, K. Kadakia, S. K. Park, and P. Kumta, "Tin and graphite based nanocomposites: potential anode for sodium ion batteries", Journal of Power Sources, vol.225, pp.316-322, Elsevier 2013,
10.1016/j.jpowsour.2012.10.014
Article
P. Saha, M. Datta, D. Lu, G. Howlett, D. Wang, A. Manivannan, and P. Kumta, "Magnesium Battery Concept for Stationary Power and Smart Electrical Grid", in 221st ECS Meeting, © 2012 The Electrochemical Society, The Electrochemical Society, May 2012
Inproceedings
P. Saha, M. K. Datta, A. Manivannan, and P. Kumta, "Electrochemical behavior of nanocrystalline MgMnO3 cubic defect spinel cathode for rechargeable magnesium battery", in Honolulu PRiME 2012, © 2012 The Electrochemical Society, The Electrochemical Society 2012
Inproceedings
K. Kadakia, M. K. Datta, O. Velikokhatnyi, P. Jampani, S. K. Park, P. Saha, J. Poston, A. Manivannan, and P. Kumta, "Novel (Ir,Sn,Nb)O2 anode electrocatalysts with reduced noble metal content for PEM based water electrolysis", International Journal of Hydrogen Energy, vol.37, no.4, pp.3001-3013, Elsevier 2012,
10.1016/j.ijhydene.2011.11.055
Article
P. Saha and S. Viswanathan, "An Analysis of the Grain Refinement of Magnesium by Zirconium", in Magnesium Technology 2011 Edited by: Wim H. Sillekens, Sean R. Agnew, Neale R. Neelameggham, and Suveen N. Mathaudhu TMS (The Minerals, Metals & Materials Society), 2011, pp.175-180, TMS (The Minerals, Metals & Materials Society), 2011 2011,
10.1002/9781118062029.ch34
Inproceedings
S. Viswanathan, P. Saha, D. Foley, and K., "Developing an improved zirconium grain refiner for magnesium", in 115th Annual Metalcasting Congress, Schaumburg, IL, US, Apr 5-8, 2011, AFS Proceedings 2011 © American Foundry Society, Schaumburg, IL USA, pp.453-459, American Foundry Society, Schaumburg, IL USA 2011
Inproceedings
S. Viswanathan, P. Saha, D. Foley, and K. Hartwig, "Engineering a More Efficient Zirconium Grain Refiner For Magnesium", in Magnesium Technology 2011 Edited by: Wim H. Sillekens, Sean R. Agnew, Neale R. Neelameggham, and Suveen N. Mathaudhu TMS (The Minerals, Metals & Materials Society), 2011, pp.559-564, magnesium technology 2011 2011,
10.1002/9781118062029.ch103
Inproceedings
P. Saha and S. Viswanathan, "Grain Refinement of Magnesium by Zirconium: Characterization and Analysis", in 115th, Metalcasting congress; Transactions of the American Foundry Society; April 5-8, 2011; 2011, vol.119, pp.469-480, American Foundry Society, Schaumburg, IL USA, AFS Proceedings 2011 © American Foundry Society, Schaumburg, IL USA 2011
Inproceedings
M. K. Datta, Da. T. Chou, D. Hong, P. Saha, S. J. Chung, B. Lee, A. Sirinterlikci, M. Ramanathan, A. Roy, and P. Kumta, "Structure and thermal stability of biodegradable Mg–Zn–Ca based amorphous alloys synthesized by mechanical alloying", Materials Science and Engineering: B, vol.176, no.20, pp.1637-1643, Elsevier 2011,
10.1016/j.mseb.2011.08.008
Article
P. Saha, K. Lolies, S. Viswanathan, R. Batson, and A. Gokhale, "A SYSTEMATIC STUDY OF THE GRAIN REFINEMENT OF MAGNESIUM BY ZIRCONIUM", in Magnesium Technology 2010 Edited by: Sean R. Agnew, Neale R. Neelameggham, Eric A Nyberg; and W Sillekens TMS (The Minerals, Metals & Materials Society), 2010. PP.425-430,Feb 2010, pp.425-430, TMS (The Minerals, Metals & Materials Society), 2010, magnesium technology 2010 2010,
10.13140/2.1.2039.7123
Inproceedings
P. Saha, "MICROSTRUCTURAL CHARACTERIZATION OF MAGNESIUM-ZIRCONIUM ALLOYS", International Journal of Metalcasting, vol.2, no.4, pp.91-92, Elsevier 2008
Article