syedn

Academic Identity

Orcid Id

Scopus Id

7202098890 & 56577288100

Researcher Id

Google Scholar Id

Syed Nasimul Alam

Associate Professor & Warden (Vikram Sarabhai Hall of Residence)

Metallurgical and Materials Engineering

(+91) 661 246 2563 , 3563

syedn[at]nitrkl.ac.in

Biosketch

20

Publications

0

Consultancy Projects

7

Doctoral Students

2

Continuing Education

11

PG Dissertation

Personal Information

Prof. Syed Nasimul Alam

Associate Professor

Metallurgical and Materials Engineering

Joined in Jul 2008

Room Number: MM-208

Department of Metallurgical and Materials Engineering, National Institute of Technology Rourkela, Sundargarh, Odisha, India - 769008

Education Qualification

Ph.D., IIT Kharagpur

Experience

No Experience Found....

Expertise Information

Research Group

Composites Materials

Areas of Interest

Nanomaterials, Composites, Mechanical Alloying, Powder Metallurgy, Materials Characterization, X-Ray Diffraction

Projects

No Projects Found....

Continuing Education

DST-STUTI workshop on "Application of XRD Technique in Materials Science and Engineering"

Metallurgical and Materials Engineering

Coordinator

22 Aug 2022 - 28 Aug 2022

Brochure

Workshop

5 Day Workshop on Computational Techniques and Mathematical Modelling (CTMM-17) for Academia and Industry

Metallurgical and Materials Engineering

Coordinator

01 Nov 2017 - 05 Nov 2017

Brochure

Workshop

Publications

Google Scholar h-index

Google Scholar i10-index

0

Scopus h-index

Total Publications: 20

S. N. Alam, A. Ghosh, P. Shrivastava, U. Shukla, K. Garg, A. C. Edara, and N. Sahoo, "An introduction to triboelectric nanogenerators", Nano-structures and Nano-objects, vol.34, no.100980, Elsevier, April 2023, https://doi.org/10.1016/j.nanoso.2023.100980 Article

P. Shrivastava, S. N. Alam, and K. Biswas, "Ex Situ Fabrication of Multiwalled Carbon nanotube-reinforced aluminum nanocomposite via conventional sintering and SPS techniques", Arabian Journal of Science and Engineering, vol.47, pp.8643-8662, Springer 2022, https://doi.org/10.1007/s13369-021-06386-w Article

P. Shrivastava, S. N. Alam, T. Maity, and K. Biswas, "Effect of graphite nanoplatelets on spark plasma sintered and conventionally sintered aluminum-based nanocomposites developed by powder metallurgy", Materials Science-Poland, vol.39, no.3, Sciendo De Gruyter, September 2021, 10.2478/msp-2021-0029 Article

P. Shrivastava, S. N. Alam, D. Panda, S. K. Sahoo, T. Maity, and K. Biswas, "Development and mechanical properties investigation of Cu-MWCNT-graphite nanoplatelets hybrid nanocomposites", Diamond and Related Materials, vol.117, Elsevier, August 2021, 10.1016/j.diamond.2021.108467 Article

L. Kumar, S. N. Alam, and S. K. Sahoo, "Influence of nanostructured Al on the mechanical properties and sliding wear behavior of Al-MWCNT composites", Materials Science and Engineering: B, vol.115162, Elsevier, July 2021, 10.1016/j.mseb.2021.115162 Article

Show All Publications(+)

L. Kumar, H. Singh, S. K. Sahoo, and S. N. Alam, "Effect of nanostructured Cu on microstructure, microhardness and wear behavior of Cu-xGnP composites developed using mechanical alloying", Journal of Composite Materials, vol.55, no.16, pp.2237-2248, SAGE Publications, January 2021, 10.1177/0021998320987887 Article

V. K. Jha, S., S. N. Alam, and . M. Roy, "Effect of Nd Doping on Structural, Electrical, Thermal and Magnetic Properties of Multifunctional BiFeO3 Ceramics", Journal of Superconductivity and Novel Magnetism, vol.33, pp.455–461, Springer, July 2020, 10.1007/s10948-019-05206-5 Article

L. Kumar, S. K. Sahoo, and S. N. Alam, "Influence of Nanostructured Cu on the Mehanical Properties of Cu-MWCNTs Composites", International Journal of Materials Research, vol.111, no.6, pp.469-478, Hanser Verlag GmbH & Co KG, June 2020, 10.3139/146.111906 Article

P. Shrivastava, S. N. Alam, D. Panda, S. K. Sahoo, T. Maity, and K. Biswas, "Effect of addition of multiwalled carbon nanotube/graphite nanoplatelets hybrid on the mechanical properties of aluminium", Diamond and Related Materials, vol.104, no.107715, Elsevier, April 2020, 10.1016/j.diamond.2020.107715 Article

V. K. Jha, M. Roy, and S. N. Alam, "Experimental Studies of Structural, Electrical and Thermal Properties of Multifunctional BiFe03 Ceramic", in International Conference on “Multidimensional Role of Basic Science in Advanced Technology” ICMBAT 2018, vol.2104, no.020020, AIP Publishing, May 2019, 10.1063/1.5100388 Inproceedings

V. K. Jha, M. Roy, and S. N. Alam, "Experimental studies of structural, electrical and thermal properties of multifunctional BiFeO3 ceramic", in International Conference on “Multidimensional Role of Basic Science in Advanced Technology” ICMBAT 2018, vol.2104, no.020020, AIP Publishing, May 2019, 10.1063/1.5100388 Inproceedings

N. Sharma, S. N. Alam, B. C. Ray, S. Yadav, and K. Biswas, "Alumina–MWCNT composites: microstructural characterization and mechanical properties", Journal of Asian Ceramic Societies, vol.7, no.1, pp.1-19, Taylor & Francis, January 2019, 10.1080/21870764.2018.1552235 Article

S. N. Alam, N. Jindal, and N. Naithani, "Effect of Addition of Cu on the Properties of Eutectic Sn-Bi solder Alloy", Material Science-Poland, vol.37, no.2, pp.212-224, Sciendo 2019, 10.2478/msp-2019-0032 Article

N. Sharma, S. N. Alam, and B. C. Ray, "Fundamentals of Spark Plasma Sintering (SPS): An Ideal Processing Technique for Fabrication of Metal Matrix Nanocomposites", Spark Plasma Sintering of Materials, ch.2, pp.21-60, Springer 2019, 10.1007/978-3-030-05327-7 Inbook

N. Sharma, S. N. Alam, B. C. Ray, S. Yadav, and K. Biswas, "Silica-graphene nanoplatelets and silica-MWCNT composites: Microstructure and mechanical properties", Diamond and Related Materials, vol.87, pp.186-201, Elsevier, August 2018, 10.1016/j.diamond.2018.06.009 Article

S. N. Alam, N. Sharma, D. Panda, A. Kumar, V. D. Sampenga, A. Sairam, V. Sarky, and M. Krupateja, "Mechanical milling of Al and synthesis of in-situ Al2O3 particles by mechanical alloying of Al-CuO system", Journal of Alloys and Compounds, vol.753, pp.799-812, Elsevier, July 2018, 10.1016/j.jallcom.2018.03.273 Article

N. Sharma and S. N. Alam, "Influence of surface roughness on wear behaviour of ceramic nanocomposites", in International Conference on Composite Materials: Manufacturing, Experimental Techniques, Modeling and Simulation, vol.5, no.14, pp.27673-28488, Elsevier, part 2, March 2018, 10.1016/j.matpr.2018.10.046 Inproceedings

N. Sharma, S. N. Alam, B. C. Ray, S. Yadav, and K. Biswas, "Wear behavior of silica and alumina-based nanocomposites reinforced with multi walled carbon nanotubes and graphene nanoplatelets", Wear, vol.418-419, pp.290--304, Elsevier 2018, 10.1016/j.wear.2018.10.008 Article

S. N. Alam, "Advanced guide to MATLAB: practical examples in science and engineering", I K International Publishing House, Metallurgical and Materials Engg. Dept.,NIT Rourkela 2015 Book

S. N. Alam, S. Islam, and S. K. Patel, "Advanced guide to MATLAB: practical examples in science and engineering", IK International Publishing House Pvt Ltd, Green Park Extension, Uphaar Cinema Market, New Delhi 2015 Book

Hide Publications (-)

Courses Taught

MM2105 : Physics of Materials {Theory}
MM2107 : Basic Physical Metallurgy {Theory}
MM215 : Physics of Materials {Theory}
MM317 : Materials Technology {Theory}
MM3203 : Manufacturing Processes {Theory}
MM446 : Composite Materials {Theory}
MM448 : Advanced Engineering Materials {Theory}
MM4510 : Advanced Processing of Materials {Theory}
MM637 : Mechanical Behaviour of Materials {Theory}
MM646 : Composite Materials {Theory}
MM652 : Experimental Techniques in Materials Engineering {Theory}
MM666 : Computational Modeling of Materials {Theory}
MM273 : Metallography Laboratory {Practical}
MM3421 : Computational Metallurgy Laboratory {Practical}
MM375 : Metallography and Heat Treatment Laboratory. {Practical}
MM376 : Computational Technique in Materials Engineering Laboratory {Practical}
MM475 : Computational Modeling of Process Metallurgy Laboratory {Practical}
MM6472 : Computational Modelling of Metallutgical Processes Laboratory {Practical}
MM675 : Computational Metallurgy Laboratory {Practical}
MM698 : Computational Modeling of Physical behavior of Materials {Practical}
WS471 : Advanced Welding and Foundry Practice {Practical}
WS471 : Advanced Welding and Foundry Practices {Practical}

Research Scholars

Ph.D. Students [6]

Development of Cu and Al-Based Metal Matrix Composites using Graphite Nanoplatelets and Multiwalled Carbon Nanotubes as Reinforcement

Lailesh Kumar

Enrolled: Oct 2012

Graduated : Dec 2017

Supervisor

Development of Alumina and Silica based Nanocomposites using Graphite Nanoplatelets and Multiwalled Carbon Nanotubes as Reinforcement

Nidhi Sharma

Enrolled: Jul 2014

Graduated : Apr 2019

Supervisor

Development of Al and Cu-Based Hybrid Nanocomposites using Graphite Nanoplatelets and Multiwalled Carbon Nanotubes as Nanoreinforcements

Pankaj Shrivastava

Enrolled: Jul 2017

Graduated : Oct 2022

Supervisor

Development of high entropy composite materials

Naveen Kumar Mindi

Enrolled: Jul 2019

Continuing

Co-Supervisor

Manufacturing

Arka Ghosh

Enrolled: Jan 2020

Continuing

Supervisor

Nano-composites

Nityananda Sahoo

Enrolled: Jul 2022

Continuing

Supervisor

Executive Ph.D. Students [1]

Ceramic Matrix Composite

Apan Kumar Bera

Continuing

Supervisor

M.Tech by Research Students [4]

Copper based metal matrix composites

Harshpreet Singh

Graduated (2014)

Supervisor

MD simulation - Deformation study of glass matrix composites

Ashwani Kumar

Graduated (2014)

Co-Supervisor

Development of Al-Fe₃Al Composites by Powder Metallurgy Route

Deepankar Panda

Graduated (2015)

Supervisor

Sono-electrodeposition of Copper-Nickel Thin Films and their Characterization

Prekshya Nath

Graduated (2016)

Co-Supervisor

Dissertations

PG Dissertation

Dipanshu Verma (213MM1477), "Development and Characterization of Al-E Glass Fiber Composites" - M.Tech. Supervisor 2014-15 Spring
Sarat Chandra Venumbaka (213MM2489), "Simulation and experimental studies of Al metal matrix composites reinforced with Fe3Al intermetallics" - M.Tech. Supervisor 2014-15 Spring
Pallabi Bhuyan (214MM1372), "Development of Cu-Based Metal Matrix Composites Using Fe3Al as Reinforcement by Powder Metallurgy Route" - M.Tech. Supervisor 2015-16 Spring
Pranay Das (214MM1349), "DEVELOPMENT AND CHARACTERIZATION OF Zn-Al2O3 COMPOSITE" - M.Tech. Supervisor 2015-16 Spring
Abhishek Kumar (215MM2433), "Milling Characteristics of Cu and Ni" - M.Tech. Supervisor 2016-17 Spring
Nitin Naithani (215MM2435), "Characterization and Comparison of Lead Free Eutectic Sn-Based Solder Alloys and the Effect of Addition of Ni in Eutectic Sn-0.7Cu Solder Alloy" - M.Tech. Supervisor 2016-17 Spring
Nikhil Jindal (216MM2444), "DEVELOPMENT OF LEAD FREE Sn-Bi-Cu SOLDER ALLOY" - M.Tech. Supervisor 2017-18 Spring
Sarthak Verma (216MM1438), "Milling Characteristics of BCC, FCC and HCP Metals" - M.Tech. Supervisor 2017-18 Spring
Rohit Raj (217MM1263), "Study of Effect of Indium(In) addition in TinCopper(Sn-Cu) Lead Free Solder Alloys" - M.Tech. Supervisor 2018-19 Spring
Nityananda Sahoo (220MM1112), "EFFECT OF ADDITION OF h-BN ON THE PROPERTIES OF Al-hBN NANOCOMPOSITES" - M.Tech. Supervisor 2021-22 Spring
Vaibhav Chaudhary (220MM1083), "Effect of milling on the structure and properties of hexagonal boron nitride" - M.Tech. Supervisor 2021-22 Spring

UG Dissertation

C Shiv Prasad (111MM0106), "A Comparative Study of the Sn-Ag and Sn-Zn Eutectic Solder Alloy" - B.Tech. Supervisor 2014-15 Spring
Kapil Kumar Gupta (111MM0488), "Effect of Addition of Al to Sn-Zn Solder Alloys" - B.Tech. Supervisor 2014-15 Spring
Manobes Padhy (111MM0478), "A Comparative Study of the Sn-Ag and Sn-Zn Eutectic Solder Alloy" - B.Tech. Supervisor 2014-15 Spring
Smarak Dash Bhattamishra (111MM0620), "Effect of Addition of Al to Sn-Zn Solder Alloys" - B.Tech. Supervisor 2014-15 Spring
Gudala Sagar Goud (111MM0502), "FABRICATION AND CHARACTERIZATION OF EUTECTIC Sn-0.7Cu LEAD FREE SOLDER ALLOY" - B.Tech. Supervisor 2015-16 Spring
Spandan Behera (112MM0395), "FABRICATION AND CHARACTERIZATION OF EUTECTIC Sn-0.7Cu LEAD FREE SOLDER ALLOY" - B.Tech. Supervisor 2015-16 Spring
Akella Sairam (113MM0604), "Effect of Milling on Melting Point of Metals Having Different Crystal Structures" - B.Tech. Supervisor 2016-17 Spring
Empally Sai Krishna (113MM0466), "Development of In-Situ Formed Al2O3 Particles in Al-CuO System by Mechanical Alloying Route" - B.Tech. Supervisor 2016-17 Spring
Rajkumar Baskey (112MM0394), "Development of In-Situ Formed Al2O3 Particles in Al-CuO System by Mechanical Alloying Route" - B.Tech. Supervisor 2016-17 Spring
Shubham Gupta (112MM0498), "Effect of Milling on Melting Point of Metals Having Different Crystal Structures" - B.Tech. Supervisor 2016-17 Spring
Venkat Dinesh Sampenga (113MM0567), "Development of In-Situ Formed Al2O3 Particles in Al-CuO System by Mechanical Alloying Route" - B.Tech. Supervisor 2016-17 Spring
Mekala Bharath Krupa Teja (114MM0505), "Development of In-Situ Formed Al2O3 Particles in Al-CuO System by Mechanical Alloying Route." - B.Tech. Supervisor 2017-18 Spring
Sarky Vinod (114MM0519), "Development of In-Situ Formed Al2O3 Particles in Al-CuO System by Mechanical Alloying Route." - B.Tech. Supervisor 2017-18 Spring
Anvesh Nathani (114MM0644), "Development of In-Situ Formed Al2O3 Particles in Al-CuO System by Mechanical Alloying Route" - B.Tech. Supervisor 2018 Summer
Mekala Bharath Krupa Teja (114MM0505), "Development of In-Situ Formed Al2O3 Particles in Al-CuO System by Mechanical Alloying Route" - B.Tech. Supervisor 2018 Summer
Sarky Vinod (114MM0519), "Development of In-Situ Formed Al2O3 Particles in Al-CuO System by Mechanical Alloying Route" - B.Tech. Supervisor 2018 Summer
Debbala Geetham Shrainyk (115MM0515), "Development and Characterization of Al Glass Fiber and Al carbon Fiber Metal Matrix Composites" - B.Tech. Supervisor 2018-19 Spring
Kakara Sri Pushpa (115MM0474), "Development and Characterization of Al Glass Fiber and Al carbon Fiber Metal Matrix Composites" - B.Tech. Supervisor 2018-19 Spring
Vaitla Nikhila Chowdary (115MM0483), "Development and Characterization of Al Glass Fiber and Al carbon Fiber Metal Matrix Composites" - B.Tech. Supervisor 2018-19 Spring
Kunapuli Susmitha (116MM0511), "Synthesis and Characterization of Nanocrystalline Al2Cu Intermetallic Compound via Mechanical Alloying." - B.Tech. Supervisor 2019-20 Spring
Prudhviraj Pola (116MM0540), "Synthesis and Characterization of Nanocrystalline Al2Cu Intermetallic Compound via Mechanical Alloying." - B.Tech. Supervisor 2019-20 Spring
Aakash Chandrakar (117MM0778), "Specimen preparation for transmission electron microscope" - B.Tech. Supervisor 2020-21 Spring
Kaushal Jain (117MM0609), "A COMPARATIVE STUDY OF VARIOUS TIN BASED EUTECTIC LEAD-FREE SOLDER ALLOYS" - B.Tech. Supervisor 2020-21 Spring
Krishan Kumar (117MM0615), "Structure of Graphene" - B.Tech. Supervisor 2020-21 Spring
Kudimi Achuth Reddy (118MM0783), "Study of Structure and Properties of hBN and Development of Cu-hBN nanocomposite by Powder Metallurgy route" - B.Tech. Supervisor 2021-22 Spring
Suman Acharya (118MM0744), "Study the formation of intermetallic compound by mechanical alloying of Fe – 30 wt.% Al" - B.Tech. Supervisor 2021-22 Spring
Kuntala Srujan Balu (119MM0936), "Synthesis and Characterization of Nano crystalline Fe-Al intermetallic compound through mechanical alloying and its subsequent annealing" - B.Tech. Supervisor 2022-23 Spring
Md Shafdar Ali (119MM0935), "Synthesis and Characterization of Nano crystalline Fe-Al intermetallic compound through mechanical alloying and its subsequent annealing" - B.Tech. Supervisor 2022-23 Spring
Shakti Prasanna Sahoo (119MM0403), "Effect of Ball Milling on the Melting Point of Copper (Cu)" - B.Tech. Supervisor 2022-23 Spring
Snigdha Saurav (119MM0408), "Effect of Ball Milling on the Melting Point of Copper (Cu)" - B.Tech. Supervisor 2022-23 Spring
Aishwarya Rani Sahoo (710MM1096), "Synthesis and Characterization of a-Al2O3 by Sol-Gel Process and Development of Zn-Al2O3 Composites by Powder Metallurgy Route" - B.Tech. M.Tech Dual Degree Supervisor 2014-15 Spring
Akella.Siva Durga Phani (711MM1132), "A Comparative Study of the Sn-Ag, Sn-Zn, Sn-Cu, Sn-Bi Lead Free Solder Alloys with the Commercially Available Sn-Pb Solder Alloy" - B.Tech. M.Tech Dual Degree Supervisor 2015-16 Spring
Bhagavant Vishnukant Gunale (713MM1127), "Synthesis and Characterization of Nanocrystalline Al2Cu Intermetallic Compound via Mechanical Alloying" - B.Tech. M.Tech Dual Degree Supervisor 2018-19 Spring
Abhilash Nayak (715MM1107), "Fabrication of Fe3Al-MWCNT Nanocomposites by Powder Metallurgy Route" - B.Tech. M.Tech Dual Degree Supervisor 2019-20 Spring
Pritesh Samal (716MM1118), "A Review on the effect of Al on the microstructure and properties of Sn-Cu lead free solder alloys" - B.Tech. M.Tech Dual Degree Supervisor 2020-21 Spring
Uddeshya Shukla (718MM1015), "Development and characterization of Al-based hybrid nanocomposite reinforced with hBN and MWCNT nanofillers by powder metallurgy route" - B.Tech. M.Tech Dual Degree Supervisor 2022-23 Spring

Awards and Honours

Memberships / Fellowships

Indian Institute of Metals (IIM), 2022

Academic Identity

Orcid Id

Scopus Id

Researcher Id

Google Scholar Id

Syed Nasimul Alam

20

Publications

0

Sponsored Projects

0

Consultancy Projects

7

Doctoral Students

2

Continuing Education

11

PG Dissertation

Personal Information

Prof. Syed Nasimul Alam

Education Qualification

Experience

Expertise Information

Research Group

Areas of Interest

Projects

Continuing Education

Publications

Google Scholar h-index

Google Scholar i10-index

0

Scopus h-index

Total Publications: 20

Courses Taught

Research Scholars

Ph.D. Students [6]

Executive Ph.D. Students [1]

M.Tech by Research Students [4]

Dissertations

PG Dissertation

UG Dissertation

Awards and Honours

Memberships / Fellowships